Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: clean install failure (0x80070570 error) on a lenoveo t410s w ssd

24 Dec 2012   #1
tathama

win 7 64 pro
 
 
clean install failure (0x80070570 error) on a lenoveo t410s w ssd

Hi there,

So I have spent the last few days troubleshooting the problem, I have tried most of the solutions I have found online, but still I get the 0x80070570 error at 14% of the install process. I have reformatted the hd prior to trying as well.

some random observations:
I have run hd diagnostics and everything passed
I notice that in the BIOS setup utility that there are 3 SATA HDDs listed though I only have the one 'internal one' and no peripherals
I have downloaded and burned (and burned to USB) the .ISO file about five times with the same result
I haven't tried removing RAM because I only have one chip (4 gb) and I assume I cant have 'no' RAM to proceed

As I am sure you can imagine, it is driving me absolutely crazy.

Any help would be hugely appreciated, even on Christmas Eve!

Thanks for reading,

Tathama


My System SpecsSystem Spec
.
24 Dec 2012   #2
gregrocker

 

Unplug all other HD's and peripherals,

Boot into BIOS setup to enable Legacy BIOS if present. Next check BIOS Boot order for an EFI Boot Disk and if present remove it, set DVD drive first to boot, HD second. Then set SATA controller to AHCI. Save changes and Exit.

Then boot into installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10 to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.
My System SpecsSystem Spec
24 Dec 2012   #3
mmkarimi

Windows 7 Ultimate x64
 
 

what was the problem about?? how it happened
My System SpecsSystem Spec
.

24 Dec 2012   #4
tathama

win 7 64 pro
 
 

Thanks Gregrocker for the instructions, but after following them I get the same result. When I get to the instilation i still get the error meesage 'windows cannot install the required files'... with the same error code 0x80070570...

any other ideas?

Thanks

tathama
My System SpecsSystem Spec
24 Dec 2012   #5
gregrocker

 

Sounds like a bad installer. Is this an original Win7 DVD or did you burn it yourself? Start over with a new ISO for your licensed version from the link given in last post, then burn to DVD or write to flash stick using the tool also given.

If DVD fails again, try the flash stick method. If that fails, unplug the DVD drive.
My System SpecsSystem Spec
24 Dec 2012   #6
tathama

win 7 64 pro
 
 

I've tried both dvd and usb boots repeatedly with different downloads of the install disk that I downloaded from the usual links so I don't think its an installer issue.
In your instructions to remove any EFI boot disks, I don't see a way to do that. I have one option to change it but it seems like a universal setting to go from ahci(?) to compatibility. I have the boot order right, but I don't see a way to change any settings of individual drives in the BIOS setup other than the boot order...

It should be such a simple process...
My System SpecsSystem Spec
24 Dec 2012   #7
gregrocker

 

Download only from the official link and burn to a good quality DVD with ImgBurn - CNET Download.com at 4x speed.

Next try writing the same ISO download to stick using How To Use UltraISO Software To Create Bootable USB Flash Drive which always works for me if others fail.

If these fail post back the exact error message, wipe the HD again.
My System SpecsSystem Spec
25 Dec 2012   #8
tathama

win 7 64 pro
 
 

So I think I have tried all possible permutations of the instructions given here and elsewhere, and the install still fails, with the 0x80070570 error, but now I get a BSOD when I hit escape out of that error. the message i referenced ntfs.sys, datestamp 4ce792f9... This was from running the install from a USB with the recommended source of the ISO... THe only think I am not sure about is how I have handled the BIOS setup utility (questions on that are in my posts above.

Any more suggestions?

Thanks for your help and merry Christmas
My System SpecsSystem Spec
25 Dec 2012   #9
gregrocker

 

Do you have an EFI BIOS? If so did you try install to UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums before trying to bypass EFI using the steps I gave you earlier?

Have you tested the RAM - Test with Memtest86+? Try reseating the RAM, checking for debris in slot and cleaning the contacts.

Finally try moving the HD to another PC to install plugged in alone, then SysPrep to move HD to another computer before moving back to problem PC.
My System SpecsSystem Spec
10 Dec 2013   #10
Caesargw

Windows7Pro 64
 
 
Win7 PRO 64 reinstall

I was reinstalling Win7 on my daughter's SYX i7 gaming computer. The file corrupt error was occuring at different percentages as the files were expanding. I connected the harddrive to a HP AMD 64 processor and was successful in installing Win7. Ran sysrep and moved the harddrive back to the SYX to complete the setup.
Process worked great, thanks for the advice
My System SpecsSystem Spec
Reply

 clean install failure (0x80070570 error) on a lenoveo t410s w ssd




Thread Tools





Similar help and support threads
Thread Forum
Error code: 0x80070570 when attempting to install
I am trying to install Windows 7 32-bit RC on a desktop PC. I have previously used this disk successfully to install the OS on a laptop. I keep getting an error message to the effect thatWindows cannot install required files. ... Error code: 0x80070570Initially I thought that this was due to...
Installation & Setup
Win 7 0x80070570 install error
Been getting this error for the past few days. I have tried just about every recommendation I've seen on this error; Ive gone through 8 sticks of RAM, multiple ISO's and burns, USB install, different DVD drives, removing all extra USB devices, 2 video cards, multiple HDD's, canceling the install...
Installation & Setup
Fresh Install (due to new MOBO) Error 0x80070570
Hey Sevenforums, About a year ago I decided to build my first computer. I did so and there was much rejoicing. That is until it started BSODing everywhere when I played video games or watched Netflix. Coming to your forums I was encouraged to do a memtest, got new RAM, for a while the problem...
Installation & Setup
Win7 install error 0x80070570
Hi, I'm experiencing a strange problem when installing Windows 7. At the file expansion stage, error code 0x80070570 appears and my installation fails. Funny thing is, I installed 7048 from a DVD burned image 2 weeks ago and it worked fine. Downloaded 7057 and durned the .iso to DVD and when...
Installation & Setup
Install error 0x80070570
Hi everyone. First post here because Iím getting really frustrated with this error message. Error code: 0x80070570. Iíve tried searching around on the internet for a fix but Iím not coming up with a lot that pertains to my situation. I am clean installing a copy of Windows 7 professional x86 on...
Installation & Setup
Clean install Win7 on Dell Inspiron 1525: 0x80070570
I'm trying to do a clean installation of Windows 7 x86 on my Dell Inspiron 1525 laptop that I bought in July 2008. It's been running Windows Vista 32-bit without any trouble. Yesterday I purchased the Windows 7 Professional 32-bit upgrade from Digital River and downloaded the ISO. I've burned it...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 01:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App