Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win7/8 boot failed, error 0x490

01 Mar 2013   #1
monkry

Windows 8 Pro 64bit
 
 
Win7/8 boot failed, error 0x490

Hi

My problem is, the boot is failed when:
[-] For 7: when 7 was loaded, it will making a windows logo from an abstract shape.
then it will 'blep', off, restarting, when the windows logo hadn't formed
[-] For 8: when the rou d cycle was rotating, 'blep'
Both No BSOD, making me so confused.
And once you got in desktop successfully, everything's normal
Well, it's true my laptop is old, but... I wanna know why this happen.

Some things:
[-] My ntbtlog: https://www.dropbox.com/s/sumaoxizoheimsq/ntbtlog.txt
the SUCCESS part is that's the log when it load successfully
the FAILED part, 'tis failed...
[-] Once, Repair Mode gave this:
A patch is preventing the system from starting
Error code: 0x490
[-] When I tried 7 safe mode:
FAILED: it 'blep' after loaded CLASSPNP.sys. But when I got into safe-mode safely,
that's also the last driver loaded, so does the problem lies after that?
[-] I don't know if there has a meaning, but some things I've done (semi-randomly) after this started:
- upgrade BIOS
- upgrade Intel's driver
- bootrec.exe fixmbr and fixboot
note that the problem happen before and after I've done this

I can't give up to install those before I know why it's impossible, since I really need to use one of them for my college assignment.


My System SpecsSystem Spec
.
01 Mar 2013   #2
gregrocker

 

Which was installed first?

Please post back a screenshot of Disk Management - Post a Screen Capture Image - Windows 7 Forums.
My System SpecsSystem Spec
01 Mar 2013   #3
monkry

Windows 8 Pro 64bit
 
 

1) at first, it only has XP. but AFAIK, never has a problem with loading OS.
well, actually sometimes when it was turned on for the first time, nothing appear, not even the manufacturer logo.
but no problem loading OS once it got through.
2) then I formatted the HDD and install 8 -> normal for some days, then went endless automatic repair
well, before went endless, there are times it went to automatic repair, but then it would go to desktop
3) then I formatted the HDD, made it into 4 partitions: 1 for XP, 1 for 7 (until now)
XP has no problem loaded, but 7 problematic

btw, the error when it has 8 is about drivers


Attached Thumbnails
Win7/8 boot failed, error 0x490-ssmemmng.png  
My System SpecsSystem Spec
.

01 Mar 2013   #4
gregrocker

 

Where is the Disk Mgmt screenshot?
My System SpecsSystem Spec
01 Mar 2013   #5
monkry

Windows 8 Pro 64bit
 
 

ah your post changed
this:

Win7/8 boot failed, error 0x490-ssmemmng.png

C: 7
D: empty
E: XP
F: datas
all NTFS

Dat unallocated... I know it exists, but dunno why or for what

btw I partitioned it when installed XP
My System SpecsSystem Spec
01 Mar 2013   #6
gregrocker

 

I would start over and wipe the HD with Diskpart Clean Command since boot code might be interfering. Access DISKPART At PC Startup from Win7 disk.

Then boot the XP CD to install it first to a reasonably sized partition.

Then boot Win7 DVD to Clean Install Windows 7 to a partition you create using the rest of the disk space.

This should configure a Dual Boot and avoid the problems.
My System SpecsSystem Spec
01 Mar 2013   #7
monkry

Windows 8 Pro 64bit
 
 

I don't have the disk I used my MSDNAA student account
Is there another way to get that diskpart?
or has it been on the ISO?

I've custom install when installed 7 in C, but actually yeah there had been XP on E
My System SpecsSystem Spec
01 Mar 2013   #8
gregrocker

 

Why did you not download and burn the DVD? You obviously need a WIn7 bootable DVD or flash stick installer to reinstall or repair the OS. It's provided along with everything needed to get a perfect install in Clean Reinstall - Factory OEM Windows 7.
My System SpecsSystem Spec
01 Mar 2013   #9
monkry

Windows 8 Pro 64bit
 
 

yap yap I downloaded the ISO and burn it to USB using Win7 USB/DVD Download tool
hem hem so I just need to make bootable USB again and try dat step right?
OK thank you so muc for the suggestion!
My System SpecsSystem Spec
02 Mar 2013   #10
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

What does yap yap and hem hem mean. Are these new computer acronyms or short hand of some kind?
My System SpecsSystem Spec
Reply

 Win7/8 boot failed, error 0x490




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
0X490 error, “Boot sector for system disk partition is corrupt”
I was researching startup programs in Msconfig start tab, comparing those programs to info in Pacs-Portal website. I unchecked two Toshiba bloatware programs and had not select apply. I left the laptop for about one minute and upon returning the “Hard Drive Wipe in Progress” message was in large...
General Discussion
Dual Boot: Win7: Boot Manager Status: 0xc000000f boot selection failed
Hello, I have dual boot in my laptop with Ubuntnu 14.04 LTS and Windows 7 Home Premium 64 bit. Today after working on Ubuntu I restarted and switched to Windows and as soon as it logged in I noticed the battery was 0%. I thought maybe it was some kind of glitch or something (silly me!) so I just...
General Discussion
windows 7 boot manager error 0xc000000e boot selection failed because
My daughter's laptop(acer aspire) has the above error message. we have no installation disc but do have the product key. I created an installation disc from my laptop but it have my product key. A tried to get it to use this cd as the install cd but it appears not to be working, What should I...
Installation & Setup
Win7 Ultimate Update Failed to Win7 Sp1 Error Code 80073701
Hello I'm Having Problem Updating My Windows 7 Ultimate into Windows 7 Ultimate SP1 I Tried Using System Update Readiness Tool for Windows 7 (KB947821) But an Error Pops Up Please HELPP!!:cry:
Windows Updates & Activation
Failed setting up dual boot Win7/XP - cannot boot Win7
I tried to set up my desktop computer running Windows 7 Ultimate 32-bit to dual boot Windows XP Home. It didn't go as planned and now Windows 7 will not boot. I get the following error message: "Windows could not start because of a computer disk hardware configuration problem. Could not read...
Installation & Setup
Error Code 0x490-Computer Will No Longer Boot to Desktop-Repair Fails
I run Windows 7 Home Premium and have the installation CD. My PC is homebuilt. It's about 1.5 years old. My problem started on Tuesday. I turned my PC on Tuesday morning and everything was fine (Windows was allowed to do an update the previous night). I turned my computer off and later...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 23:45.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App