Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows7 cant install on GTP partition & Device Driver install missing

15 Mar 2013   #41
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by VistaKing View Post
Ok . What your Sata configuration setup as under Advanced in the BIOS ? Did the laptop come with windows 8 perinstalled ? UEFI has 3 partitions .

information   Information

Partition 1 - System
Partition 2 - MSR
Partition 3 - Primary
Windows 7 has three.
Windows 8 has four.


My System SpecsSystem Spec
.
15 Mar 2013   #42
mfrowen

Windows 7
 
 

Yes my machine come with Windows7 pre-installed as no optical drive with this computer.

Yeah 3
1. EFI systempartition
2. OS Windows
3. Recovery

and 4th partition I made for Data and back up

My sata config is and be surprised by the amount of options. These are in order:

Sata Mode Selection [AHCI]

Serial ATA Port 0
Device Type
Model Name
Serial Number

....Thats every option in sata config
My System SpecsSystem Spec
15 Mar 2013   #43
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 



That has to do with a bad installation files .

Lets try this again when you get the error again . Remove the drive and click cancel button and get back to the window where it says Install . Then put the USB drive back to the USB 2.0( left side next to DC port ) and click on Install .

Added: Change SATA from AHCI to either IDE or legacy which ever option it has
My System SpecsSystem Spec
.

15 Mar 2013   #44
mfrowen

Windows 7
 
 

I suppose I could. I will look into it now but not sure if gonna have enough space on a usb... This UEFI boot menu has hardly no options compared to others
My System SpecsSystem Spec
15 Mar 2013   #45
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

To bypass formatting in the USB device within the tool:

Note   Note
The USB device should be formatted manually before running the tool.


If you need to format the USB drive within Diskpart to get it to be Fat32 format do the Diskpart commands before running the Windows 7 DVD/USB Tool.

1. Ensure the registry key "HKCU\SOFTWARE\Microsoft\ISO Backup Tool" is created.

2. Create a new DWORD value named "DisableFormat" in this location and set the value to 1.

Found how to disable the formatting feature in the tool.
My System SpecsSystem Spec
15 Mar 2013   #46
mfrowen

Windows 7
 
 

Window7 DVD/USB tool does not work. Tryed fixes and still got no where. Yes I run the dispart commands before I put the iso on the usb

Also just tryed it AGAIN and exacly like you said you and still got there error. I even re done the boot usb disc. Why is my damn computer being annoying. Irs only a konth and bit old
My System SpecsSystem Spec
15 Mar 2013   #47
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Can't we just disable the whole UEFI thing and just install Windows ? Before you had issues did you create recovery discs ?
My System SpecsSystem Spec
15 Mar 2013   #48
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by mfrowen View Post
Yes my machine come with Windows7 pre-installed as no optical drive with this computer.

Yeah 3
1. EFI systempartition
2. OS Windows
3. Recovery

and 4th partition I made for Data and back up

My sata config is and be surprised by the amount of options. These are in order:

Sata Mode Selection [AHCI]

Serial ATA Port 0
Device Type
Model Name
Serial Number

....Thats every option in sata config
Backup your Data to Ex HDD, & make the ASUS USB Pen Drive Recovery.


Before you start make your Recovery disk.
Disable Boot Booster in BIOS setup before you perform system recovery from USB flash disk, external optical drive or hidden partition.

1. Press <F9> during bootup.
Ensure to press <F9> only once during bootup.
2. Select the language you use and click to continue.
3. Repeat the step 1—2 in the previous section.
4. Connect a USB storage device to your PC and click Backup in the Recovery System dialog box to start the recovery files backup.
The size of the connected USB storage device should be larger than 16GB.
Memory cards are not supported for this function.
A dialog box appears as a reminder if you have not connected the USB storage device for system recovery backup to your PC.
5. Select a desired USB storage device if more than one USB storage device is connected to your PC and click Continue.
6. All the data on the selected USB storage device will be cleared. Click Continue to start the backup or click Back to backup your important data.
You will lose all your data on the selected USB storage device. Ensure to back up your important data beforehand
7. The system backup starts and click OK when done.
My System SpecsSystem Spec
15 Mar 2013   #49
mfrowen

Windows 7
 
 

Quote   Quote: Originally Posted by VistaKing View Post
Can't we just disable the whole UEFI thing and just install Windows ? Before you had issues did you create recovery discs ?
No cant disable it. The UEFI is basically the BIOS...

Dont have an optical drive so cant make disks.

As I said in the first post. Been trying to do a clean Re-install of windows to get rid of factory Bloatware.

Thank Theog. I will get hold of a big external hard drive asap then I can do a back up. Then I will clean my OS drive at the install now screen using diskpart. I will have a look and set to default and see it it helps
My System SpecsSystem Spec
15 Mar 2013   #50
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

You could disable the UEFI . Get an external hard drive . Then you could wipe the laptop hard drive to have 1 partition .
My System SpecsSystem Spec
Reply

 Windows7 cant install on GTP partition & Device Driver install missing




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
How to install device drivers during Windows7 install
During the installation process of W7 it is possible to load drivers, e.g. the downloaded SATA, LAN and Graphics drivers for a specific motherboard (MoBo ASUS P7P55D). However, these files are compressed zip files and Unzipping delivers a set of folders with in each a number of files. Which are...
Hardware & Devices
Can't install W7 - Required CD/DVD Device driver missing!
Help please! I have a Vista Home premium Acer Travelmate 5720G laptop and am trying to update it to W7 Pro 32 bit with a fresh install using a Microsoft Volume Licensing DVD. The DVD is read, setup loads and I get as far as the language and keyborad selection screens. After completing the...
Installation & Setup
Network Controller Device Driver Missing - Can't Install - No WiFi
Have peculiar situation with laptop, hope someone can please advise.... Recently got the little Sony VAIO P, 2nd generation model VPCP11AKJ. Problems are as follows: 1. This is Japanese model, so, came with Japanese version of Win7HP and recovery OS is in Japanese and I do not know or...
Installation & Setup
"A required CD/DVD drive device driver is missing" during install
Tried everything and by everything, i do mean everything. spent close to a week frying my brains on this problem. after getting to the select language and input screen, it loads and then goes to a screen saying that the required CD/DVD driver is missing. tried different OS, windows 7 home, home...
Installation & Setup
"A required CD/DVD device driver is missing" during Win7 Install
Hello everyone, first post and thread! :) After many hours today looking for answers to this problem in many threads (and websites), I've finally decided to post to get some help from you guys! Any help would be greatly appreciated. I have just finished building a new desktop, here is the...
Installation & Setup
CD/DVD device driver missing on 7 Starter install
Alright, about a month ago, my Windows 7 Starter went dead on my Toshiba NB250 netbook. At first I thought it was a HDD issue. I tried using downloaded 7 recovery tools to no avail, and for some reason, whatever took out the OS, took the factory installed recovery partition with it.. After a few...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App