Windows7 cant install on GTP partition & Device Driver install missing

VistaKing said:

What tool did you use to create the USB installation ? If you used the tutorial that theog mentioned regarding step 11 it should work. If you get an error message stating " CD/DVD Driver is required and can't be found " Click Cancel and remove the USB and put it back in. ( Make sure you are in the USB 2.0 )

I am using the USB2.0 port and at first I used WIndows 7 DVD/CD but didnt work and only does NTFS not fat32. I then tryed WinUSB and didnt work. I they tryed RT7 but it got stuck on loading.

After each try without succsess I re-diskpart the usb again.

Latest I used was 7z to extract to usb which was given in a earlier comment in this post.

I followed step 11 to the letter as I am creating a 64bit Windows7 UEFI USB...

Are you booting USB drive in UEFI mode?

VistaKing said:

If you get an error message stating " CD/DVD Driver is required and can't be found " Click Cancel and remove the USB and put it back in. ( Make sure you are in the USB 2.0 )

Just tried that on my USB2.0 and it still comes up with the same error message.

theog said:

Are you booting USB drive in UEFI mode?

Yes there are 2 boot option for usb. One with UEFI and other without and I boot everytime with The UEFI boot....

VistaKing said:

When you did the diskpart . Did you use " format fs=fat32 quick " ( without quotes )

Yes I did. I followed the Diskpart instuctions to the letter

VistaKing said:

May I get an image of the actual error message you're getting please ?

Yes of course. Will take 10minutes as will have to take image on phone. I will take other images kf bios for you too.