Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 Bootmgr missing

22 Mar 2013   #11
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Try this

You may try to rebuild the ‘Boot Configuration Data’ or fix ‘Boot manager’. To do so, refer the following steps:
a) Put the Windows 7 installation disc in the disc drive, and then start the computer.
b) Press a key when you are prompted.
c) Select a language, a time, a currency, a keyboard or an input method, and then click ‘Next’.
d) Click Repair your computer.
e) Click the operating system that you want to repair, and then click ‘Next’.
f) In the System Recovery Options dialog box, click Command Prompt.
g) Type BOOTREC /REBUILDBCD and press enter; check if it resolves the issue.
h) If the issue persists then repeat steps ‘a’ to ‘f’ and type BOOTREC /FIXBOOT and press enter; and check the status.
Note   Note
To start the computer from the Windows 7 DVD, the computer must be configured to start from the DVD drive.



My System SpecsSystem Spec
.
22 Mar 2013   #12
Mufasil

Window 7 32 Bit
 
 

My System SpecsSystem Spec
22 Mar 2013   #13
x BlueRobot

 

Have you looked at Greg's suggestion?
My System SpecsSystem Spec
.

22 Mar 2013   #14
Mufasil

Window 7 32 Bit
 
 

@x BlueRobot i also did Greg's suggestion but nothing happen same error comes.
My System SpecsSystem Spec
22 Mar 2013   #15
x BlueRobot

 

Please post the results of each step you have taken.
My System SpecsSystem Spec
22 Mar 2013   #16
Mufasil

Window 7 32 Bit
 
 

@VistaKing After doing your steps new error come this
"
OBJECT GUID: {9dea862c-5cdd-4e70-acc1-f32b344d4795}
Status:0xc0000034
Info:The configuration for an element within the object is invalid in the boot configuration boot store.
"
My System SpecsSystem Spec
22 Mar 2013   #17
Mufasil

Window 7 32 Bit
 
 

@x BlueRobot: I have did yesterday i didn't have any pics i have did following steps:
1.First i reboot my pc
2.Press F12
3.Select Diagnostic
4.it will check memory and tell me everything is ok.

but same error comming....
My System SpecsSystem Spec
22 Mar 2013   #18
gregrocker

 

I gave you a whole list of steps to perform of which that was only one.

If you're not going to be any more thorough than this then you can forget about getting it fixed.

You need to perform every single step and report back on each so we can help you if you can't get them done.

Why would you ask for help and be so sloppy, disregarding steps like that? Troubleshooting requires absolute thoroughness.
My System SpecsSystem Spec
22 Mar 2013   #19
Mufasil

Window 7 32 Bit
 
 

@gregrocker:
i have did every step when i diagnose the system using dell diagnostic utility during diagnosing error accours:
Error Code:0F00:1348
MSG DISK:BLOCK 290687 DRIVE DID NOT COMPLETE COMMAND UPDATE FIREWARE.
My System SpecsSystem Spec
22 Mar 2013   #20
Mufasil

Window 7 32 Bit
 
 

@gregrockerURING THIS PROCESS ANOTHER ERROR ACCURS
ERROR CODE:0F00:1328
My System SpecsSystem Spec
Reply

 Windows 7 Bootmgr missing




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
bootmgr is missing Windows 7
PC has started to come up with this message. Using the Windows disc, it doesn't find the installation when you put the disc in and choose repair. Used the cmd prompt to do the following. Changed to C: then, bootrec /FixMbr - said successful bootrec /FixBoot - said successful bootrec...
General Discussion
bootmgr is missing windows 7
Hello, after reading all the posts about my problem still need your help :shock: -Asus eee 1005 -Windows 7 USB problem: bootmgr is missing Asus hdd is ntfs, usb key with windows works on another computers without any problems. Asus bios has been set to IDE, AHCI, compatibile/enhanced and...
Installation & Setup
bootmgr missing error, became bootmgr MISSING.
I compressed my entire C drive. When I rebooted I got the error "Bootmgr is compressed" I don't have a optical drive, so I made a bootable USB drive using YUMI 0.2.3 and added the windows 7 recovery ISO. The USB drive boots and I can enter the recovery console, etc. It couldn't auto-repair...
General Discussion
bootmgr missing. windows 7
my hard drive has to partitions one is recovery. basically i was trying to make the recovery partition visible in my computer. and i made it the active partition by mistake. so all the os and booting data is on the other partition. is there any way i can change the active partition without a disk...
Installation & Setup
Bootmgr missing windows 7
My gateway nv53 crashed 1week ago . I tried to recover from os installed from factory 4 times and comp would work allday great . Upon restarting a second time the system would go down again . I decided to do a complete reinstall with the recovery discs . unfortunitly it wiped my harddrive clean ....
Hardware & Devices
BOOTMGR is Missing During Windows 7 Install
Hi, I'm attempting to install a copy of Windows 7 on a Asus Eee 1000HE. I downloaded the ISO copy of Windows 7 Home Premium from the Microsoft website on another laptop which I own. I then used diskpart to clean and partition my 16gb usb drive to NTFS. I then transferred the Windows 7 ISO to...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:07.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App