Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 0x80070570 when installing win 7


18 May 2013   #1

Win 7 x64
 
 
0x80070570 when installing win 7

Hey guys,

A week ago I started having BSOD issues when I logged into my laptop (even if I wasn't doing anything) which I got round to addressing today. I booted into safe mode and the BSODs stopped. Since my laptops been in use for a while and was getting cluttered, I thought I'd do a fresh install of win 7.

This is where the issue lies. I've tried installing Win 7 ultimate (x86 and x64), win 7 professional(x86) and win 7 home premium (x64), all legit, through either a USB or installation discs which have all worked before. However, everytime I get the 0x80070570 and I have no idea what to do. Occasionally I also get differing BSODs with titles like "bad pool header" or "cache_manager" but these are very rare. More often than not, installation quits due to 0x80070570 error.

I'm beginning to think this may be a hardware fault. It is a Sony Vaio VPCEB44FX.

Any help would be appreciated.

Many thanks,
Baggy


My System SpecsSystem Spec
.

18 May 2013   #2

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

baggy welcome to SevenForums

Start off by testing your RAM

RAM - Test with Memtest86+

Note   Note
You will need a USB flash Drive
My System SpecsSystem Spec
18 May 2013   #3

Win 7 x64
 
 

Ok thanks, I shall give that a go now.
My System SpecsSystem Spec
.


18 May 2013   #4

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

baggy

Also take a look at the link below

Blue Screen of Death (BSOD) Posting Instructions
My System SpecsSystem Spec
18 May 2013   #5

Win 7 x64
 
 

Sorry, please ignore
My System SpecsSystem Spec
18 May 2013   #6

Win 7 x64
 
 

Quote   Quote: Originally Posted by VistaKing View Post
baggy welcome to SevenForums

Start off by testing your RAM

RAM - Test with Memtest86+

Note   Note
You will need a USB flash Drive

I take it this is bad? And what next, the link suggests I should test out only one stick? Should I cancel this test then?

Cheers


Attached Thumbnails
0x80070570 when installing win 7-img-20130518-wa0003.jpg  
My System SpecsSystem Spec
18 May 2013   #7
Microsoft MVP

 

Follow the steps in tutorial to isolate the bad stick or slot. It could be either.

Check the sticks and slots for debris and blow them out with canned air if necessary.

Swap the sticks to see if it makes a difference.

Then once you isolate the stick, replace it.

Follow these steps to Clean Reinstall - Factory OEM Windows 7 which are the same for retail and will yield a perfect install, so long as you stick with the tools and methods given.
My System SpecsSystem Spec
18 May 2013   #8

Win 7 x64
 
 

Quote   Quote: Originally Posted by VistaKing View Post
baggy

Also take a look at the link below

Blue Screen of Death (BSOD) Posting Instructions
I'm really sorry about this, but initially I thought my problems were software related and tries to reinstalla clean version of windows. But the main error now is not being able to complete the installation due to error 0x80070570, though this has occasionally been followed up by BSOD. But does the fact that I now have no operating system mean I cannot post dump files?
My System SpecsSystem Spec
18 May 2013   #9

Win 7 x64
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Follow the steps in tutorial to isolate the bad stick or slot. It could be either.

Check the sticks and slots for debris and blow them out with canned air if necessary.

Swap the sticks to see if it makes a difference.

Then once you isolate the stick, replace it.

Follow these steps to Clean Reinstall - Factory OEM Windows 7 which are the same for retail and will yield a perfect install, so long as you stick with the tools and methods given.
Aaagh this means I'll need to open up the laptop . Thanks for your help though

Do I only need to follow that link once I've replaced the RAM? I take it those instructions will fail if I try to do so before replacing the RAM?
My System SpecsSystem Spec
18 May 2013   #10
Microsoft MVP

 

The tutorial will show you how to isolate the RAM stick or slot by process of elimination.
My System SpecsSystem Spec
Reply

 0x80070570 when installing win 7




Thread Tools



Similar help and support threads for2: 0x80070570 when installing win 7
Thread Forum
Another 64 it 0x80070570 error Installation & Setup
error 0x80070570 while installing, now won't show anything on-screen Installation & Setup
Error installing OS on fresh new computer (0x80070570) Installation & Setup
Error 0x80070570 Please help! Installation & Setup
error 0x80070570 Installation & Setup
0x80070570 Error Installation & Setup
0x80070570 error ... :( Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:28 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33