Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New Build & Drives

08 Jun 2013   #1
Bertison

Windows 7/64 HPremium.
 
 
New Build & Drives

Hello folks, not been here for a while due to medical stuff, am fine now as evidenced by the following burst of activity:


I attach details of a new build that I am currently working on. I have backed-up my original system to my NAS and to a 32GB USB key. I would be grateful for advice.
I have a Full Retail, genuine copy of Windows 7/64 bit to transfer from donor to new build. I have transferred contents of 'E' drive to 'C' drive, then cloned 'C' to 'E', using Macrium, which I recommend for its simplicity and ease of use.
I intend to install clone 'E' to the new build, leaving the SSD Ready Cache, and 1 TB. Hard drive, unplugged, to be plugged in and setup later, to avoid any drive letter problems.
Can I install 'E' to new system (which will become 'C' in the new build) and expect Windows 7 to work in the new system, without problems? I have my COA from the original retail disc and will format the 'C' drive remaining in the old system, thus removing Windows from that machine. I understand the fact that the new system is quite different hardware to the old, but don't know if this will affect Activation.
I am aware that the Hdd spinners are SATA2, these are from my old system and may be replaced at a later date.
Many thanks for any assistance.




Attached Files
File Type: doc Build0613.doc (12.0 KB, 3 views)
My System SpecsSystem Spec
.
08 Jun 2013   #2
Dude

Windows 10 Pro X64
 
 

Bertison, I don't think you will have any activation problem. If you do just use the phone method

Activate Windows 7 by Phone
My System SpecsSystem Spec
08 Jun 2013   #3
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

As the new MOBO's now have a uEFI/BIOS firmware.
How to install Windows 64 bit on a uEFI/BIOS firmware:
UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with
or
UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
My System SpecsSystem Spec
.

08 Jun 2013   #4
Bertison

Windows 7/64 HPremium.
 
 

I would just like to add, for anyone using the same mobo/Alpenföhn CPU cooler combination, that there is a problem. The RAM lower socket (nearest to CPU) cannot be used with this cooler, because the fins project slightly to prevent it being fitted. No problem for me, I have enough memory at (2x4 GB) in the other two sockets. Note that this is not a Height factor of the RAM, but a Width factor.
My System SpecsSystem Spec
08 Jun 2013   #5
gregrocker

 

If the image isn't UEFI then it might not transfer if your board is UEFI. You'd at least need an imaging app that can handle the change.

Better to get a perfect Clean Reinstall which steps are the same for retail, adapting if necessary for UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums .

Let us know how it goes.
My System SpecsSystem Spec
Reply

 New Build & Drives




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Detecting drives; Done, No Drives Found - Error and Slow startup
Hey. When I start up my PC everything goes very slowly, things "chops" or lagged as most say. It comes up a menu that says: JMicron Technology Corp.. PCI Express to SATA1 HOST Controller ROM v1.02 Copyright © 2005-2010. JMicron Technology Corp..
Hardware & Devices
Error message "No drives found" on boot up after new build & install
Just completed my first build. I have two error messages during the boot sequence that I cannot resolve. The first screen shot during boot is the Asus logo. Next is a black screen that reads: "JMicron Technologies, PCI Express to SATA Host Controller ROM V1.07.23 Detecting drives; Done; No...
Installation & Setup
New build, but old hard drives
I am building a new rig and going to keep my old hard drives. One has Win 7 OS in it and the other is used for storing pics, movies, and the like. Everything is going to be new (mobo, memory, vid card, cpu), but the hard drives are the same. Is it possible to boot up the system using the hard...
Installation & Setup
1st problem w/this build-no ROM Drives
I just got around to formatting the HDD and then iinstalled two programs, Streets & Trips 2010 and Roxio Creator Pro 2011. After that, the ASUS Sabertooth screen stays on for a long time, the welcome screen loads for a long time and I had no DVD-ROM Drives. I did restart and no ROM Drives, then I...
PC Custom Builds and Overclocking
New Custom Build -- "No drives were found"
hello, i have just assembled a new computer, and i am attempting to perform a custom install of windows 7. however, i am getting an error message saying that no drives were found. i have a brand new seagate 7200.12, which shows up in the bios and will pass tests in SeaTools. i am at a loss, so any...
Installation & Setup
USB drives stopped working on build 7000
I have installed build 7000 and it has been working pretty good for the last week. Now my usb drives and sticks stopped working. OS will see the drives, but cannot access them. It shows drive as raw data, when I plug it in on XP or Vista the drive works fine. What could cause this??
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 08:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App