|25 Jul 2013||#3|
| || |
Unplug all other HD's and peripherals,
Boot into BIOS setup, reset to defaults, save changes. (If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install.) Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.
Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.
At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:
SELECT DISK 0 (after confirming Windows 7 target HD #)
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.
In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.
After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the HD and marking Active which overcomes certain install failures.
|My System Specs|
|Similar help and support threads for2: Windows 7 installation problem !!!|
|Windows 7 boot problem and installation problem.||Installation & Setup|
|Windows 7 installation problem||General Discussion|
|Windows installation problem||Installation & Setup|
|Windows 7 Installation Problem||Installation & Setup|
|Windows 7 installation problem!! help||Installation & Setup|
|Windows 7 installation problem||Installation & Setup|
|Our Sites ||Site Links ||About Us ||Find Us |
© Designer Media Ltd
All times are GMT -5. The time now is 03:49 AM.