Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Changed Sata settings in BIOS now disk is invalid

18 Aug 2013   #11
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

You will need to install the Intel software before changing the BIOS.

IRST acceleration cache
Solved System Builder Install/HP 32GB mSSD HDD Acceleration Cache

Intel links.
IRST acceleration cache
Intel® Cache Acceleration Software
New and Innovative Caching Solution


My System SpecsSystem Spec
.
18 Aug 2013   #12
goodjob1

windows 7 professional 64 bit
 
 

I can't notice a difference between when IRST was on and now, besides booting quicker. The install didn't change any performance with games. After about two minutes frame rates drop to 2-10, from 100+, and the games aren't very graphics intensive at all. I've been looking around and apparently the computer can't keep itself cool. It gets pretty hot, especially while it's closed for some reason. Should it be heating up like that or is this computer just bunk?
My System SpecsSystem Spec
18 Aug 2013   #13
goodjob1

windows 7 professional 64 bit
 
 

I don't have an ultrabook so I went to the dell website, put in my sevice tag and was sent to a page with the driver. I installed the driver. after it was done it required a restart, then after the restart windows said a new device was installed and required a restart. after all that i checked the bios and it's still set to AHCI so i changed it to IRST, and it went to blue screen again. The two links posted below the drivers are sent to a page for a trial request, i filled out the required fields and I was redirected to a page where i was told my request for a trial was accepted. Windows was already set to automatically update drivers as well.
My System SpecsSystem Spec
.

18 Aug 2013   #14
gregrocker

 

Is the IRST driver installed and has no error (!) in Device Manager?

How does the games performance compare to when you had the SATA controller set to IRST in the previous install?

I've asked some IRST experts to look at your thread.

Meanwhile there are steps for dealing with overheating in Troubleshooting Steps for Windows 7 . Install Core Temp to give variable fan speed and monitor temps from System Tray, compare temps with max for the CPU to see if it needs fans cleaned and possibly CPU repasted, elevate rear or consider a cooling pad, don't close top as it traps heat.
My System SpecsSystem Spec
19 Aug 2013   #15
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hello goodjob1. Greg told me have a look at your thread ... actually I just try to help, not that much expert as Greg thinks

With Intel Smart Response (accessible as SATA controller option with IRST enabled), the computer is supposed to boot a bit faster, as SCSI responses quicker. But as you can see, it is problematic as Greg stated earlier. And your observation that it does not increase performance visually is also correct. So the logical trade-off is to keep away from it.

But if you post it following the Blue Screen of Death (BSOD) Posting Instructions, it will be easier to have a detailed look at what is going on there.
My System SpecsSystem Spec
19 Aug 2013   #16
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

I replace my 32gb mSata's with 128gb mSata & do reinstall.
May work better with Windows 8, but for me I would still replace.
My System SpecsSystem Spec
20 Aug 2013   #17
Anak

Microsoft Community Contributor Award Recipient

Win 7 Home Premium 64bit Ver 6.1.7600 Build 7601 - SP1
 
 

Greg also asked me to weigh-in on your situation goodjob and I'll admit I struggled with how was the best way to help, and after researching for the last two days, I've decided this is the best course of action.

First, you need to supply us with better information, specifically, the model of your Dell laptop, there are many Dells out in the field that already come with or without the mSata Drive capability, some
already have the mSata installed, but it sounds in your case that you went out and purchased one.

If that is the case it has to be IRST compatible, and we need to know the make and model number of the mSATA Drive.
Quote   Quote: Originally Posted by goodjob1 View Post
it has 32 bg msata drive
This description is not good enough. Even with Intel mSATA drives there may have to be a BIOS upgrade depending on your model of Dell, it could be anyone from A01 to A17. I would help you find it, but I don't have enough information.

The new IRST driver,
has to be version 10.5 or later or this won't work. If you did not see the Acceleration Button in the Manage IRST software window then you do not have the proper version.

There can also be Motherboard limitations, did you have to install a Daughterboard?

If yours isn't that early of a model it should be mSata Drive capable, and if this is the case the instructions to install should be included in your Owners manual, if you didn't get one with your laptop you will have to find one at the Dell site. If you do find it, please, supply us with a link to it.

There are some caveats with Dell's.
  • Encryption: Systems configured with a Dell Data Protection Encryption accelerator card do not support Rapid Start.
  • Some software encryption vendor guidelines may recommend using Windows® hibernate in place of Windows® sleep. If sleep is disabled, Rapid Start state will be disabled automatically.
  • Dell does not support Self-encrypting HDD’s or SSD’s with Rapid Start.
  • Passwords: Some Dell systems do not support Rapid Start when HDD (ATA security) or system BIOS passwords are enabled.
Source: Dell Whitepaper: Intel Responsiveness Technologies Setup Guide - Direct2Dell - Direct2Dell - Dell Community

Keep this link in mind if you encounter the same problem after changing the SATA controller: Error message occurs after you change the SATA mode of the boot drive

I am going to ask another member I know that has experience with Dell's to stop by, I hope you can get back to us with the needed information before he arrives.


My System SpecsSystem Spec
21 Aug 2013   #18
SandeepP

Winndows 7 32 bit
 
 

Hi goodjob1,

I understand that you have been assisted by one of the most experienced professionals available here on the forum.

However, as Anak suggested I am pitching in to provide any information that I would have as you are using a DELL system.

I believe after reading both the pages that either you have not installed windows correctly or there is a hardware failure.

First of all kindly provide us with the detailed specification of the system. Kindly update your system specs here by following this.

There are two ways you can install windows on the system with MSATA drive either you install windows on MSATA and use SATA for storage.

Other way is you install windows on the SATA drive and use MSATA as cache device or what we call as ISRT technology.

Please check these tutorials below which might would help you understanding the same:

How to clean install Windows 7 or 8 on MSATA(SSD) drive

Clean install Windows on system with MSATA and ensuring ISRT

Please check the same and do reach to us with required information so we can suggest further if required.
My System SpecsSystem Spec
21 Aug 2013   #19
gregrocker

 

Thanks SanDeep for the valuable links which I have bookmarked. These make the choices very clear and accessible.
My System SpecsSystem Spec
21 Aug 2013   #20
SandeepP

Winndows 7 32 bit
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Thanks SanDeep for the valuable links which I have bookmarked. These make the choices very clear and accessible.
Hi gregrocker,

I am honored to have these kind words for you. And I appreciate the Rep as well. Hope this helps OP many other users as well.
My System SpecsSystem Spec
Reply

 Changed Sata settings in BIOS now disk is invalid




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Disk Management vs Bios SATA drives
Interesting. Not a problem cuz everything works fine. But... in disk management... my boot drive (PNY 240gb SSD) is listed as in disk 1, with my data drive (Seagate 480gb SSD) listed as disk 0 While my BIOS says the PNY is connected to SATA 1, and the Seagate to SATA 2 should i be...
Hardware & Devices
Bios settings re new SSD boot drive & MB Sata connectors
Just migrated/updated my main C: drive to a SSD Seagate 128GB drive....minor issues at first but now running great. Question is re my system bios. What if any is the correlation between the Sata 'order' in the following: Bios Main Settings readout ( bios main settings.jpg ) Bios Boot...
Hardware & Devices
SATA-1 & SATA3 Bios doesn't see SATA-1
I had a pc with SATA-1 drive installed windows7 64 bit, it was working fine untill I decided to attache the another hard drive SATA-3 with server 2003 loaded on it. I wanted to copy some data from SATA-3 and then wipe it off and use as additional storage, But the PC stop booting from windows7...
Hardware & Devices
Sleep mode changed upon altering BIOS settings
Hi, I'm not actually having a problem per say. However, my computer was getting too hot because I'm in Florida, So i went into the BIOS and changed a few things like turning off the auto-controlled fan sensors, FSB i put down to 200 and the CPU voltage I changed to 1.0Volts. I started up windows...
Performance & Maintenance
Changed BIOS settings now Windows 7 wont start
Hi I have been incredibly stupid and changed the settings in my BIOS setup. What is even more stupid is I did this by making it "Load Optimal Defaults" so I dont actually know what has been changed. As a result of this windows 7 now cannot start, it brings you to the error fixing part where...
General Discussion
changed BIOS settings..:((
I was trying to increase the effective core speed on my computer. I tried to do it from my bios and did many changes in the settings by enabling each core.. Auto Overclock. and things like that. Now when i saved and exit the computer is not even showing the bios screen, in fact it is not showing...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 15:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App