Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: install issue

21 Oct 2009   #1
hating7atm

vista ATM
 
 
install issue

I have a legit copy of Microsoft windows 7 which i get off msdn academic allience it downloaded fine unpacked fine i then burnt it to a dvd via power iso

and when i run it i get this message




Any help would be mucho apreciatedd thankss


My System SpecsSystem Spec
.
21 Oct 2009   #2
gregrocker

 

Burn it slower at around 4x, or load the files into the root of a USB stick formatted primary and boot from that.

Why are you running it and not booting it?
My System SpecsSystem Spec
21 Oct 2009   #3
DarkXeno

Windows 7 Ultimate x64 SP1
 
 

A few quick things. First please fill out your system specs in your userCP. Second are you trying to install 64bit or 32bit? if its 64bit you need to reboot the computer and run the install off the DVD on boot. Also what speed did you burn the DVD at? did you let the software verify the iso after burn? and what do you mean by unpacked??? Last time I remembered MSDN let you download ISO which you burn straight to DVD no unpacking needed...
My System SpecsSystem Spec
.

21 Oct 2009   #4
hating7atm

vista ATM
 
 

Rightty well msdn downloads then unpacks all to a iso.
I then opened the iso in poweriso i then burnt it straight to disc at i would assume 8x also it never said anything about verifying i assumed it finished when it opened my disk tray

so you saying i should extract it then try and run it ( as i tryed that to no avail)

I checked my system specs and they are capable of 7

32bit os ( i downloaded 32 as thats what my vista is

thanks for the help
My System SpecsSystem Spec
21 Oct 2009   #5
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by hating7atm View Post
I have a legit copy of Microsoft windows 7 which i get off msdn academic allience it downloaded fine unpacked fine i then burnt it to a dvd via power iso

and when i run it i get this message




Any help would be mucho apreciatedd thankss
If you downloaded it you should probably do it again, May be a bad burn. The code is an unhandled exception. that could be the dvd or the disk

Ken
My System SpecsSystem Spec
21 Oct 2009   #6
DarkXeno

Windows 7 Ultimate x64 SP1
 
 

What else is running in your systemtry when you try to start the setup?
My System SpecsSystem Spec
21 Oct 2009   #7
hating7atm

vista ATM
 
 

Quote   Quote: Originally Posted by DarkXeno View Post
What else is running in your systemtry when you try to start the setup?
ermm nothing as i thought that was a problem the first time round so i closed everything and installed burned with nothing else opened
My System SpecsSystem Spec
21 Oct 2009   #8
gregrocker

 

Download free ImgBurn, burn extracted ISO at 4x with verify. It never fails.
My System SpecsSystem Spec
21 Oct 2009   #9
hating7atm

vista ATM
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Download free ImgBurn, burn extracted ISO at 4x with verify. It never fails.
kk will try it
My System SpecsSystem Spec
21 Oct 2009   #10
hating7atm

vista ATM
 
 

still hasnt worked
My System SpecsSystem Spec
Reply

 install issue




Thread Tools




Similar help and support threads
Thread Forum
Issue after a W7 install.
Hi. Yesterday I installed a W7U-32bit on a computer. This was after what I recognized what I see here. I would start up the computer, and got the window "Starting Windows". The computer has been on with this window since 3 hours now. What to do ?. Attached is what I see.
Installation & Setup
Win 7 Pro x64 Install Issue
Folks, I bought a used HP xw6200 workstation and wish to install Win 7 Pro x64 on it. During the install, I go to do a fresh install ona known good Seagate 500GB Barracuda ES hard drive, it does NOT appear, but in BIOS, the drive shows. What gives? Need help ASAP...
Installation & Setup
HP Multi Print/Scan Issue Re Install Issue?
I have an HP M1522 NF multi function peripheral attached to a PC running Windows 7. I needed to re install the drivers and software the other day but now it will only install the printer drivers and not the scanner drivers or any of the accompaying software?
Hardware & Devices
Breakdown of Install Issue - Can't read Install CD
Hello, Here's the breakdown: HP Laptop with Vista Home Premium 32 bit Install Windows 7 Home Premium Had to remove HP Quick Launch - no issues During verification the system kept asking me to remove kaspersky anti-virus - I do not have this on my computer - never had. Just to be sure I...
Installation & Setup
Any USB Install Issue
Hey guys me again (lol) I have a new problem! WOOHOO! Okay I have this Dell Dimension 2400 Desktop, that doesn't want to install ANY Operating System via USB. I can get it to boot the USB, it loads partly then just quits. Usually it just loads the background and then gives up and doesn't read...
Chillout Room
64 bit Install Issue
Hi guys! For weeks I've tried the 32bit version of Win7, and like any normal geek, I wanted to try the 64bit version, my cpu supports 64bit OS's, and I even downloaded the 64bit version from msdn back in december, but I haven't been able to install it... no matter what I try I can't get pass...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:44.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App