Changing motherboard without reinstalling Wndows 7 Pro

Page 3 of 4 FirstFirst 1234 LastLast

  1. ABC190
    Posts : 42
    Vista
    Thread Starter
       New #21

    Hello again everyone,

    I have another question and I thought it would be better to ask in the same thread. My Windows 7 install works fine with zero stability issues ever since moving to my new motherboard via Paragon, though I have a question regarding my boot/Windows drive.

    My HDD was set to IDE mode rather than AHCI. First thing I did after installing the new motherboard was go into the BIOS and ensure that the boot/Windows HDD was set to IDE as I read that changing it to AHCI would prevent Windows 7 from booting.

    Though considering that I used Paragon, would switching from IDE to AHCI still cause an issue?
      My Computer
    Quote Quote

  3. gregrocker
    Posts : 50,642
       New #22

    If it's running fine then I would not change it unless you know for a fact it will work better with AHCI, need an AHCI feature like hot-plugging, or want to experiment.

    If you do so then set a System Restore Point - Create and follow the steps for AHCI : Enable in Windows 7 / Vista - Windows 7 Forums.

    If required to fully restore you'd change the BIOS setting back to IDE, then if necessary boot into System Recovery Options to run System Restore.
    Last edited by gregrocker; 03 Nov 2013 at 15:11.
      My Computer
    Quote Quote

  4. morteza451
    Posts : 1
    Win
       New #23

    Don't waste of time. Use sysprep.exe for prepare the computer for new hardware detection.
      My Computer
    Quote Quote

  6. nolimitkemet
    Posts : 40
    Windows 7 Ultimate x64 SP1
       New #24

    Migration Success with Windows 7 Ultimate


    Thanks to this thread and the Paragon ISO posted in the tutorial, I was able to go from an NVIDIA based Socket 775 ASUS P5N-D with a Dual-Core E6500 Wolfdale 2.93GHz to an Intel based Haswell 1150 Asus Z87 Plus with a 3.5 GHz I7-4770K (overclocked to 4.225 GHz) on the same Windows 7 Ultimate Install.

    I was able to have Windows 7 boot with AHCI after updating the MB bios and that allowed me to successfully restore the OS to a 500GB Samsung SSD 840 Evo with the full benefit. I did have to reactivate Windows and the Microsoft Office 2010 Suite, but no big deal.

    Loving Life!
    Last edited by nolimitkemet; 21 Feb 2014 at 13:53.
      My Computer
    Quote Quote

  7. Kari
    Posts : 17,545
    Windows 10 Pro x64 EN-GB
       New #25

    nolimitkemet said:
    Thanks to this thread and the Paragon ISO posted in the tutorial, I was able to go from an NVIDIA based Socket 775 ASUS P5N-D with a Dual-Core E6500 Wolfdale 2.93GHz to an Intel based Haswell 1150 Asus Z87 Plus with a 3.5 GHz I7-4770K (overclocked to 4.225 GHz) on the same Windows 7 Ultimate Install.

    I was able to have Windows 7 boot with AHCI after updating the MB bios and that allowed successfully restore the OS to a 500GB Samsung SSD 840 Evo with the full benefit. I did have to reactivate Windows and Microsoft Office 2010 Suite, but no big deal.

    Loving Life!
    It's good to know you got it done. Congratulations.

    A personal note from a confused geek:

    I am totally unable to comprehend this "Please do not use the Microsoft Windows native tool made exactly for this! Use instead this or that third party tool or edit registry manually, whatever but not the native tool designed to do exactly what you want to.".

    This from Microsoft:

       Note
    Important

    You must use the Sysprep /generalize command to generalize a complete Windows installation before you can use the installation for deployment to a new computer, whether you use imaging, hard disk duplication, or another method. Moving or copying a Windows image to a different computer without running the Sysprep /generalize command is not supported.

    Before anyone comments that "You must use..." part of the above quote, of course I know it's not true. It's just Microsoft's way to say "This is the official way and we've made a tool for you to do this, anything else will not be supported".

    A rhetorical question, not expecting any answers: What is the point behind asking users to avoid a fast and simple procedure done with native Windows tools which any noob can do, whenever there's a third party unofficial solution available?

    A confused geek,

    Kari
    Last edited by Kari; 21 Feb 2014 at 12:30. Reason: A context changing typo had to be fixed :).
      My Computer
    Quote Quote

  8. nolimitkemet
    Posts : 40
    Windows 7 Ultimate x64 SP1
       New #26

    Sysprep not an option


    Kari said:
    nolimitkemet said:
    Thanks to this thread and the Paragon ISO posted in the tutorial, I was able to go from an NVIDIA based Socket 775 ASUS P5N-D with a Dual-Core E6500 Wolfdale 2.93GHz to an Intel based Haswell 1150 Asus Z87 Plus with a 3.5 GHz I7-4770K (overclocked to 4.225 GHz) on the same Windows 7 Ultimate Install.

    I was able to have Windows 7 boot with AHCI after updating the MB bios and that allowed me to successfully restore the OS to a 500GB Samsung SSD 840 Evo with the full benefit. I did have to reactivate Windows and the Microsoft Office 2010 Suite, but no big deal.

    Loving Life!
    It's good to know you got it done. Congratulations.

    A personal note from a confused geek:

    I am totally unable to comprehend this "Please do not use the Microsoft Windows native tool made exactly for this! Use instead this or that third party tool or edit registry manually, whatever but not the native tool designed to do exactly what you want to.".

    This from Microsoft:

       Note
    Important

    You must use the Sysprep /generalize command to generalize a complete Windows installation before you can use the installation for deployment to a new computer, whether you use imaging, hard disk duplication, or another method. Moving or copying a Windows image to a different computer without running the Sysprep /generalize command is not supported.

    Before anyone comments that "You must use..." part of the above quote, of course I know it's not true. It's just Microsoft's way to say "This is the official way and we've made a tool for you to do this, anything else will not be supported".

    A rhetorical question, not expecting any answers: What is the point behind asking users to avoid a fast and simple procedure done with native Windows tools which any noob can do, whenever there's a third party unofficial solution available?

    A confused geek,

    Kari
    Sysprep was simply not an option in my particular case as I had previously done an in place upgrade.
    Last edited by nolimitkemet; 21 Feb 2014 at 13:54.
      My Computer
    Quote Quote

  10. Kari
    Posts : 17,545
    Windows 10 Pro x64 EN-GB
       New #27

    nolimitkemet said:
    Sysprep was simply not an option in my particular case as I had previously done an in place upgrade.
    Please do not misunderstand my previous post. I am always happy to hear a problem is solved.

    My "thinking loud" was and is not intended to be taken as critics towards you. I can understand your issue, and the solution was this time correct for you. Instead it was a general thing which I have been wondering quite a lot, your thread just offered a correct place to post it.

    I have never hided the fact that I am something those with more negative attitude towards the company and its main products call "A Microsoft and Windows Fanboy". In my own Windows usage as well as when I am suggesting or recommending various procedures to other users, I will always try to manage with native Windows tools as long as I see no rational reasons not to use them.

    The same with this sysprep subject. Or Windows Search, not to mention the native Backup. I have had some quite intensive discussions for instance here at the Seven Forums with other geeks who jump in and post using all caps bold font size 5 to yell different OPs "Dude, do not use that Windows native tool, there's a lot of third party alternatives!".

    You did what you had to do and as I said before, I'm happy you got it sorted.

    Kari
      My Computer
    Quote Quote

  11. AddRAM
    Posts : 13,576
    Windows 10 Pro x64
       New #28

      My Computer
    Quote Quote

  12. pietpara
    Posts : 8
    Windows 7 Ultimate x64
       New #29

    Backup also needed?


    Hello,
    I have read this thread with great interest since I want to do the same; i.e. change mobo, CPU, RAM and ODD without having to reinstall Win7 and setup all my apps and customizations again. Reinstalling Win7 is no big deal, but reinstalling all apps and all customizations/preferences in all apps, that is hell.

    I believe to understand that that is exactlywhat Paragon P2P will do.
    However, I am still confused about whether Paragon will indeed retain all Win7 settings, program installations, and user profile. I could not find that mentioned explicitlyin the manual either.
    I also saw talk about making a backup before starting, but did not see any step in the tutorials saying how to make the backup nor how to restore it.

    So, my question is... do I make a backup?
    If yes, with Windows Backup? An image backup? A profile backup?
    And how do I restore and at which point in the Paragon P2P process?

    Also, my OS drive is a SSD. And I have the user folder on a different drive by using Junction Links.
    Would that cause any issues?

    All your help is appreciated! :)

    thanks
    PietPara
      My Computer
    Quote Quote

  13. gregrocker
    Posts : 50,642
       New #30

    It's the exact same OS with some drivers changed. But I would not do it if you have any less than a perfect Win7 install as compiled in Clean Reinstall - Factory OEM Windows 7 since both are an investment in time and a perfect install is the goal at all times.

    Always keep your files and Win7 image backed up. Most of us here prefer Acronis (free with any WD or Seagate HD) or https://www.sevenforums.com/software/...e-macrium.html.

    If Win7 fails to start after adjustment, confirm the Partition - Mark as Active is 100mb SysReserved (preferred) or C and run Startup Repair - Run 3 Separate Times.

    Once it starts it will change out many drivers in a cascade you can watch from the System Tray animated icon. Once it finished do a reboot, then enable Automatically deliver drivers via Windows Update (Step 3)
    to run all rounds of Important and Optional Windows Updates, with reboots, until no more are offered at all.

    This normally suffices to have a perfectly running system. However if there are issues just post them back.
      My Computer
    Quote Quote

 
Page 3 of 4 FirstFirst 1234 LastLast

  Related Discussions
Hi guys After "successfully" booting into windows after changing motherboard whitout reinstalling windows I have some issues that I think mostly is driver related. Everything in desktop look the same, windows seem very stable and many programs seem to work but I have a hard time installing new...
I am replacing my mobo shortly. I am running W7 and XP dual boot, I am using the same cpu, graphics card ram, drives etc. I don't want to reinstall at the moment, how do I go about getting it all to work correctly? TIA PAUL
Hey guys, Apologize in advance if this has been covered numerous times but i can't seem to find the right keywords to research in google and this forum. Anyways, I currently have a Q6600, Gigabyte P35 motherboard, 4GB DDR2 800 ram, and 2 x 320GB in raid 0 using the ICH9R chipset. The OS is...
reinstalling with new motherboard
in Installation & Setup

i am getting a new mobo and CPU, i have a lot of data on my computer that i do not have the ability to backup (other hard drive is only 300gb and i have about 600gig of video/pics etc etc on my main drive) I am wondering if i can put in my new hardware, then do an install over the top of this...
Hello. I had to take my computer into the shop because of hardware problems. The motherboard was replaced. I have two questions: Since my motherboard is the same kind will my CD key still work? The shop said I will have to reinstall the operating system because of the motherboard change. If...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 19:24.
Find Us