|12 Nov 2013||#1|
| || |
Problem signature o7: unknown
Multiple times i have tried to install Windows 7 in my laptop, process stops at copying files ( i mean second section ). i have seen Cdrive has 2mb free space so i have totally formatted all drives. now also its saying some problem.
I tried Startup Repair:
shown below results :
Problem event name: StartupRepairOffline
Problem Signature 01: 0.0.0.0
Problem Signature 02: 0.0.0.0
Problem Signature 03: unknown
Problem Signature 04: 0
Problem Signature 05: unknown
Problem Signature 06: 1
Problem Signature 07: unknown
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
so kindly help me to solve this issue...
mail : firstname.lastname@example.org
|My System Specs|
|13 Nov 2013||#2|
| || |
Unplug all other HD's and peripherals,
Boot into BIOS setup, reset to defaults, save changes. If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install:
Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.
Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. I would use a fresh ISO written with tool in Step 2 as yours is in question.
At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:
SELECT DISK 0 (after confirming Windows 7 target HD #)
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.
In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.
After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the HD and marking Active which overcomes certain install failures.
|My System Specs|
|Our Sites ||Site Links ||About Us ||Find Us |
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd
All times are GMT -5. The time now is 01:50 PM.