Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Problem: Missing CD/DVD Drivers... on HP 4530s

21 Nov 2013   #1
naruto

Windows 7 Pro x64
 
 
Problem: Missing CD/DVD Drivers... on HP 4530s

Hi Everybody,

I have an HP Probook 4530s running Win 7 Pro x64 (came with it preinstalled) and i started recently to get some software issues and i want to reinstall the OS on it.
I have tried the DVD way to install the OS but i get the error message of missing CD/DVD Drivers.
I have also made a USB key installation, but always having the same error message.
I have provided the HDD, CD/DVD drivers but they are not accepted.
i made a clear BIOS which didn't work.


Someone can help please.


My System SpecsSystem Spec
.
21 Nov 2013   #2
Ztruker

Windows 10 Pro X64
 
 

Try using F11 at boot to use the built in recovery partition to restore to factory new state.

Using f11 recovery tools

CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All files
you have created and any software installed on the computer are permanently removed. The f11
recovery tool reinstalls the operating system and HP programs and drivers that were installed at the
factory. Software not installed at the factory must be reinstalled.

To recover the original hard drive image using f11:

1. If possible, back up all personal files.

2. If possible, check for the presence of the HP Recovery partition: click Start, right-click
Computer, click Manage, and then click Disk Management.
NOTE: If the HP Recovery partition is not listed, you must recover your operating system and
programs using the Windows 7 operating system DVD and the Driver Recovery disc (both
purchased separately). For additional information, refer to Using a Windows 7 operating system
DVD (purchased separately) on page 129.
128 Chapter 7 Backup and recovery

3. If the HP Recovery partition is listed, restart the computer, and then press esc while the “Press
the ESC key for Startup Menu” message is displayed at the bottom of the screen.

4. Press f11 while the “Press <F11> for recovery” message is displayed on the screen.

5. Follow the on-screen instructions.

Maintenance & Service Guide (PDF) is here: http://h20565.www2.hp.com/portal/sit...tte.cachetoken
My System SpecsSystem Spec
22 Nov 2013   #3
naruto

Windows 7 Pro x64
 
 

Hi

i don't have F11 option at boot because i've already deleted the recovery partition.
My System SpecsSystem Spec
.

22 Nov 2013   #4
Ztruker

Windows 10 Pro X64
 
 

I can never understand why people delete the recovery partition.

Oh well, this is what the manual says about using a DVD.

Using a Windows 7 operating system DVD (purchased separately)
To order a Windows 7 operating system DVD, go to Country-language selector | HP® Support, select your country
or region, and follow the on-screen instructions. You can also order the DVD by calling technical
support. For contact information, refer to the Worldwide Telephone Numbers booklet included with
the computer.

CAUTION: Using a Windows 7 operating system DVD completely erases hard drive contents and
reformats the hard drive. All files you have created and any software installed on the computer are
permanently removed. When reformatting is complete, the recovery process helps you restore the
operating system, as well as drivers, software, and utilities.

To initiate recovery using a Windows 7 operating system DVD:
NOTE: This process takes several minutes.

1. If possible, back up all personal files.

2. Restart the computer, and then insert the Windows 7 operating system DVD into the optical
drive before the Windows operating system loads.

3. When prompted, press any keyboard key.

4. Follow the on-screen instructions.

5. Click Next.

6. Select Repair your computer.

7. Follow the on-screen instructions.

I would suggest pressing the Fn key that brings up the boot menu, usually F12 and selecting the optical drive from there.
My System SpecsSystem Spec
24 Nov 2013   #5
gregrocker

 

The error is almost always a bad installer which must be written or burned using a special tool.

Start over using the installer and tool provided in Clean Reinstall - Factory OEM Windows 7
which will also show you how to get and keep a perfect install.
My System SpecsSystem Spec
Reply

 Problem: Missing CD/DVD Drivers... on HP 4530s




Thread Tools






Similar help and support threads
Thread Forum
HP 4530s probook BSOD issue! Please help
Hi all I bought a probook for my wife last year as I thought it would be bullet proof but that is not the case. It was purchased so that she could do work easily when she was pregnant. It was purchased from saved laptops for a decent price and I got 100 quid cash back. Also had them upgrade...
BSOD Help and Support
Hardware is using up most of my RAM HP Probook 4530s
I have a HP Probook 4530s that is double booted with Windows 7 and OSX and has 8 GB of RAM. It is running the version of Windows 7 Home Premium 64-bit that came with the computer. None of the original software has been removed. I have been having some issues with my hardware consuming most of the...
General Discussion
BSOD HP ProBook 4530S
Receiving the following BSOD Stop Error 0x0000008E (oxc000005, 0x83632f8b,oxafifb64c, oxooooooo) When this started the power brick is not recognized by the bios but when the battery is removed the laptop will power up. I have downloaded the latest bios update from HP. Can/should the update be ran...
BSOD Help and Support
Problem Installing Win7 x86 - Missing Drivers
Hi All, First time poster so take it easy! :P I'm having trouble installing Win7 x86 onto a 160GB and the BIOS has no AHCI settings that I can find. Motherboard = MSI 945PL NEO Processor = Pentium 4 3.40 GHz RAM = 2x 2GB DDR2
Installation & Setup
Are missing drivers the problem?
Two apparent problems on a Gateway NX570X computer seem to have occurred since installing Windows 7. The computer generally works fine...BUT the printer (Epson Stylus Color 980) will not print and the Mass Storage Controller has an exclamation point for troubleshooting. (Have already deleted the...
Drivers
Problem: Missing CD/DVD Drivers...
Just thought I would pass this bit of information along, I was installing windows 7 pro student download edition iso version the other day on a newly built system and I ran into this problem. To make a long story short I ended up hooking my old ide dvd drive to the system and it loaded no problem...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 17:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App