How to create a recovery partition for a blank HD

Page 1 of 3 123 LastLast

  1. Posts : 16
    Windows 6 Ultimate x64
       #1

    How to create a recovery partition for a blank HD


    Hello,
    Although this is my first post here, I am no stranger to this forum. So I have a blank hard drive which is for a notebook laptop with no DVD drive. I am planning to install windows 7 but I also do not have a 4GB () flash disk, at least not at the present.
    So I though of creating a recovery partition. I am using windows 7 on my laptop and I have a SATA to USB cord. I have been creating partitions for some time now so I though it will be just the same process except that it is on another HD. Here is what I usually type on the console window.

    Code:
    diskpart
    list disk
    select disk X
    list partition
    select partition X
    active
    exit
    X:\boot\bootsect.exe /nt60 X:
    But when I was done with the process, transferred the HD to the notebook it did not boot into the set up process.
    Although I don't know the problem, I suspect that the problem might be this last line :

    Code:
    X:\boot\bootsect.exe /nt60 X:
    Please help if you can.

    Thanks.
      My Computer


  2. whs
    Posts : 26,210
    Vista, Windows7, Mint Mate, Zorin, Windows 8
       #2

    I think you are better off to make a USB recovery stick. Those sticks cost pennies.

    Newegg.com - $0 - $10, usb stick
      My Computer


  3. Posts : 16
    Windows 6 Ultimate x64
    Thread Starter
       #3

    whs said:
    I think you are better off to make a USB recovery stick. Those sticks cost pennies.

    Newegg.com - $0 - $10, usb stick
    Please, you are not answering my question. The thing is I do not want to use a USB because I could have bought one as you pointed out. I want to have a permanent recovery partition.
      My Computer


  4. whs
    Posts : 26,210
    Vista, Windows7, Mint Mate, Zorin, Windows 8
       #4

    If your notebook has a recovery partition, you can just transfer it to the blank drive (together with the C partition and the 100MB system partition). For that you use imaging.

    Imaging with free Macrium

    Here is some other little tutorial I made for transferring the OS. It was made for new SSDs but is the same for HDDs. You just have to define all the required partitions on the HDD.

    SSD - Install and Transfer the Operating System

    Btw: The commands for creating partition are below. If you create several, you have to specify the offset for the second and third (in MBs) in the 'create' command.

    Diskpart
    List disk
    Select disk n (where n is the number that was given for your Disk in List disk)
    Clean
    Create partition primary
    Format fs=ntfs quick
    Active
    Exit

    http://technet.microsoft.com/en-us/library/cc727978(v=ws.10).aspx
      My Computer


  5. Posts : 16
    Windows 6 Ultimate x64
    Thread Starter
       #5

    Thanks for the reply. I think that what you're implying is too much. I wouldn't be needing the windows file for my computer since it is almost certain that the HD will not boot on the other computer as the hardware on both are not the same. I will just see the blue screen of death.
    What I want is a way of installing windows 7 from a partition to another partition on the same disk when the disk is empty. i.e. The partition will not be made by an operating system on the HD but rather by another operating system.
      My Computer


  6. Posts : 13,576
    Windows 10 Pro x64
       #6

    medwatt said:
    whs said:
    I think you are better off to make a USB recovery stick. Those sticks cost pennies.

    Newegg.com - $0 - $10, usb stick
    Please, you are not answering my question. The thing is I do not want to use a USB because I could have bought one as you pointed out. I want to have a permanent recovery partition.
    A permanent recovery partition would be a partition with an image on it.
      My Computer

  7.    #7

    How about if you ask us what works best so we can share what we've learned from helping tens of thousands of users with Win7 since before it was even released?

    It isn't worth the trouble to install from bootable HD.

    To use a partition or HD for Recovery what works is to store a backup image there, then boot with the Win7 disk to reimage C from the stored image. However since this image can be placed anywhere there is no sense putting it on the same HD where it would be lost along with the OS if the HD fails.

    But if you have another OS onboard we can show you how to run Win7 installation files from a partition or another HD so that it overwrites C, or set those files to boot from a Boot menu at startup to reinstall or run repairs with this method: https://www.sevenforums.com/installation-setup/309891-install-os-hard-drive.html
    Last edited by gregrocker; 28 Nov 2013 at 21:36.
      My Computer


  8. Posts : 16
    Windows 6 Ultimate x64
    Thread Starter
       #8

    gregrocker said:
    How about if you ask us what works best so we can share what we've learned from helping tens of thousands of users with Win7 since before it was even released?

    It isn't worth the trouble to install from HD. To use a partition or HD for Recovery what works is to store a backup image there, then boot with the Win7 disk to reimage C from the stored image. However since this image can be placed anywhere there is no sense putting it on the same HD where it would be lost along with the OS if the HD fails.

    If you have another OS onboard we can show you how to run Win7 installation files from a partition or another HD so that it overwrites C, or set those files to boot from a Boot menu at startup to reinstall or run repairs with this method: https://www.sevenforums.com/installation-setup/309891-install-os-hard-drive.html
    I don't understand exactly what you're saying. The thing is I have already made a partition on the new HD and copied the entire windows 7 installation disk just the same I do when doing it on the same HD. But the setup cannot boot from the HD when as would be the case when not done on an external HD.
    So if you know why this is the case and can offer me a solution I'll be happy. If you can suggest another method (as you claim) without the use of a DVD drive or USB flash drive I'll be glad too.
    You know I already have a 1.5TB external HD and would have used it to install the windows but every tutorial that I read I see that I must format the drive which is not advisable in my case since it has almost every piece of data that matters to me. Is there a way, as in linux distros, to create a bootable USB without formatting ?
      My Computer


  9. whs
    Posts : 26,210
    Vista, Windows7, Mint Mate, Zorin, Windows 8
       #9

    I think we don't understand what you are trying to do. Your story is very confusing.

    If you want to create a recovery partition using the partition from another system, I don't think that will work. What exactly is installed on the system for which you want to create a recovery partition. And what are the specs of that system.
      My Computer


  10. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #10

    medwatt said:
    Is there a way, as in linux distros, to create a bootable USB without formatting ?
    This doesn't make any sense to me....to create a bootable Linux USB you usually have to format it. Im quite confused over what you are trying to do....
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:54.
Find Us