Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Need help with error code on ISO burn

26 Jan 2014   #21
herbc

win 7 64 Home edition
 
 

I downloaded it from this link but i will do it again if you think it will help. I am running win 7 64 bit sp1




Attached Thumbnails
Need help with error code on ISO burn-untitled.jpg  
My System SpecsSystem Spec
.
26 Jan 2014   #22
fireberd

Windows 10 64 bit
 
 

I don't see that you tried what I suggested, burn a disc from a file (any file) on the hard drive. Have to verify that the drive will actually work with another file. If it does then the iso file you have is suspect. If it doesn't work with some other file then it puts the problem back on, probably, the hard drive itself.
My System SpecsSystem Spec
26 Jan 2014   #23
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Try Jack`s suggestion
My System SpecsSystem Spec
.

26 Jan 2014   #24
gregrocker

 

Once you do that to verify OD works, try using Windows 7 USB-DVD Download Tool.

Verify that the download completed and is the size Brian posted. If it fails again try another ISO download.

Follow all the steps here to do a perfect Clean Reinstall - Factory OEM Windows 7
My System SpecsSystem Spec
26 Jan 2014   #25
herbc

win 7 64 Home edition
 
 

Oh man, i had to run out but when I got back i remembered i had some offline recovery disks that I know worked and did boot fine so i tried them again and it seems that even those won't boot anymore.

The boot order was set to boot from the disc first but all i hear is the whining of it trying to fully boot up but it fails to complete it .
My System SpecsSystem Spec
26 Jan 2014   #26
gregrocker

 

Then I'd use a new ISO provided in Step 1 written to flash stick installer with tool provided in Step 2 of Clean Reinstall - Factory OEM Windows 7.

To boot the flash stick, set the HDD to boot first in BIOS setup then trigger the stick to boot using the one-time BIOS Boot menu key for your PC, listed under USB, Removable or HD's. You may have to expand the listing to see it.

If stick starts the install over again after the install reboots then unplug it.

If stick fails to boot try unplugging the DVD drive. It may be faulty.
My System SpecsSystem Spec
26 Jan 2014   #27
herbc

win 7 64 Home edition
 
 

Thanks for the assistance.
My System SpecsSystem Spec
27 Jan 2014   #28
herbc

win 7 64 Home edition
 
 

Code:
 
Quote   Quote: Originally Posted by gregrocker View Post
Then I'd use a new ISO provided in Step 1 written to flash stick installer with tool provided in Step 2 of Clean Reinstall - Factory OEM Windows 7. To boot the flash stick, set the HDD to boot first in BIOS setup then trigger the stick to boot using the one-time BIOS Boot menu key for your PC, listed under USB, Removable or HD's. You may have to expand the listing to see it. If stick starts the install over again after the install reboots then unplug it. If stick fails to boot try unplugging the DVD drive. It may be faulty.
The highlighted info above i don't understand , i did manage to get the ISO on a thumb drive but i don't see any options to boot from the usb and i looked everywhere.

I used another computer to download a new ISO image and when i tried to boot using my laptop (Asus u56e ) it still won't do it. The drive makes noise but eventually starts up with the normal screen which reads starting windows.

The dvd drive looks like it's not reading anything.

Where would i buy a replacement drive since it may be faulty , i would like to have it internal if that's possible.
My System SpecsSystem Spec
27 Jan 2014   #29
gregrocker

 

Every PC has a one-time BIOS boot menu key. On Asus it's normally F8 but can be another which may be shown on the first boot screen. You would hold that key to access the Boot Menu, then choose the flash stick to boot.

The stick will only be bootable if you used the tool specified in my earlier post to write the ISO to stick.

If you cannot find the one-time Boot Menu key, then enter BIOS setup to set the Flash Stick to boot first, before HDD. However this may require unplugging the flash stick after first reboot during install since otherwise it will restart the install when it reboots.

The way to access BIOS to change the boot order if needed is shown here: How to Boot A Computer from CD or DVD - YouTube
My System SpecsSystem Spec
27 Jan 2014   #30
herbc

win 7 64 Home edition
 
 

I am trying to upload some pictures from my camera but can't seem to get them to post , they are jpeg/s , I want you to see what I'm looking at because it's confusing.

Any idea why i can't post?
My System SpecsSystem Spec
Reply

 Need help with error code on ISO burn




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Started with error code 0xC0000006 and now I have Error Code: 0x803002
This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I...
General Discussion
BSOD PLaying League of Legends error code 0x0000001e a common code
Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much...
BSOD Help and Support
DVD burn error 'there was a problem'
I have burned CD's and DVDs before no problem. Now I get a window 'Error - there was a problem burning this disc' after maybe 2 minutes of building the image file. Using the built in burn appl in 7 Pro. (I'll try another appl if I can't solve this.) DVD +R disc is fine, doesn't begin to even...
General Discussion
Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424
Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I...
System Security
My pc wont burn iso to Discs maybe a dvd rom error?
So it will burn any single file but not an iso.Anytime i try to burn one i will get the message displayed at the image i attached.This happens with nero burning rom as well.I tried burning it at different speed but still the same.any idea whats wrong?
Hardware & Devices
System image burn to external drive or burn to cds? Question in messag
I have 120 gb external drive. I don't mind using the external drive to burn the system image on as i barely ever use it and yes it still works. However, I worry about system image being re written by virus should i ever get a virus, spyware, malware, ect. on my external drive and then the viruses...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App