Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 SP1 failure

16 Feb 2014   #1
Zarnix112

Windows 7 Ultimate x64
 
 
Windows 7 SP1 failure

Hello guys, so i installed W7 after buying a SSD, everything went well, the windows was updating to sp1 but i didnt know that and i closed the computer to take a look at the ssd's serial number to see if there are any updates (yes, very stupid of me), after i started it again it started updating on the "Starting Windows" screen amd it got stuck at 530-580 out of 96508, and then restarts, the error code is 0x000021a, and then after the restart the bios can't find my SSD, only if i turn it off then back on it will be recognized, i tried reinstalling windows, failed because the ssd stopped being recognized, tried the script.vbs thing, it fails after 10 minutes because it cannot find windows files on the ssd, tried dism.exe, it helps me boot to the Blue screen with "Please Wait" but then it restarts and so on, tried last known good configuration and everything. Plus, when i try to install windows on my HDD, it tells me that (it's 500GB) every partiton (got 2) is made out of 400 gb and has 300 gb free space... Did the sp1 update mess up anything that recognizes the size of my HDD? What's going on????????


My System SpecsSystem Spec
.
16 Feb 2014   #2
Zarnix112

Windows 7 Ultimate x64
 
 

Update: i tried to take a different HDD with windows installed and it gave me the 0x0000007B error which is a virus code. How do i remove the virus using command prompt or something else? Cause i don't have acces to the actual Windows. Oh yeah, and the ssd works EXTREMELY slow, it takes me 5-10 mins to get to the system recovery menu in "repair my computer"
My System SpecsSystem Spec
16 Feb 2014   #3
Zarnix112

Windows 7 Ultimate x64
 
 

Ok, so i guess i am the only person in this world with this problem and i should throw all my PC to the trash, because i cannot reinstall Windows aswell
My System SpecsSystem Spec
.

16 Feb 2014   #4
Brink

64-bit Windows 10 Pro
 
 

Hello Zarnix, and welcome to Seven Forums.

See if you may be able to boot from your retail Windows 7 installation media, then:

1) Boot to a command prompt at boot to run the "clean" (not "clean all") command on the hard drive that you want to install Windows on. Be warned that this will completely erase everything on the hard drive including all partitions. Be sure that you run the "clean" command on the correct hard drive.
Disk - Clean and Clean All with Diskpart Command
2) When "clean" has finished, use OPTION TWO in the tutorial below in the same command prompt at boot to create a new primary partition.
Partition or Volume - Create New
3) Restart Windows installation to see if you may be able to install to this hard drive now.

Hope this helps,
Shawn
My System SpecsSystem Spec
16 Feb 2014   #5
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Just re install windows again, and this time don`t interrupt the pc when it`s updating.

Make sure the ssd is the only drive connected.
My System SpecsSystem Spec
17 Feb 2014   #6
Zarnix112

Windows 7 Ultimate x64
 
 

Thank you for your help but the actual problem was my SSD's (Kingston SSDNow V100 128G) firmware was bad and it is working fine now. My problem was that i could not modify ANYTHING on the SSD (Delete, move etc.). Thanks for the Answers
My System SpecsSystem Spec
Reply

 Windows 7 SP1 failure




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
External Hard Drive failure. "Bad disk" after power failure
Hi Everyone, I'm hoping to get some help. I had a power outage while my WD Elements 1.5 TB Hard drive was on. I wasn't accessing it but apparently that was enough. I had a lot of important data on it but losing hope after unsuccessful attempts to use PhotoRec to get items off it. It...
Hardware & Devices
Pre-failure and Old-age questions -Drive headed for failure?
Hi, My SMART data reports pre-failure and old age in each category. It says overall health as "Passed". What do these mean and will a simple overwrite help it repair bad parts/sectors, or is this drive headed for failure in the very near future? Is there anything I can do in the interim to...
Hardware & Devices
Windows 7 failure!!!!1
I have a very serious problem with my pc. The problem is that i get this "Windows fail to start" then like every time i try to run automatically fix startup problem but after that it comes alright. Then after every two days i get this problem again. I have even format my computer and install a new...
BSOD Help and Support
windows 7 failure
In My system is Windows 7 ultimate X64. Today I Connected One USB flash drive to the My system. I Opened it All the files is that flash drive is shown as shortcuts. I tried to open it But Nothing Opening . After that I restarted the system. But Now My system is getting failure. Not Booting. Please...
BSOD Help and Support
Bootup Failure/Repair Failure/Corrupted Files
Hi Guys, First post here. I'm very discouraged with my new pc. I just built my first rig from scratch and have been having lots of problems ever since a recent thunderstorm. I made the most idiotic mistake of all time and forgot to plug the PSU AC supply into the surge protector and had it...
BSOD Help and Support
HD failure or Windows 7 failure?
Today my Windows 7 Home Premium started giving me problems. After freezing a couple of times it finally wouldn't start up, directing me to Startup Repair. The Startup Repair it automatically redirected me to would freeze when I got to "System Recovery Options" without allowing me to choose one of...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App