win 8 to 7


  1. Posts : 2
    windows 8
       #1

    win 8 to 7


    so I'm running on a Lenovo ideapad y500 preinstalled with windows 8.. I formated the drive by using command "clean" than formated my drive to NTSF for windows 7 compadibility or to at least the the installation working. However after that I am getting an error called boot manager is missing however.. When I change my boot options back from legacy to eufi I'm able to boot the windows 7 cd.. Though when I try to boot the cd from eufi it continues to freeze and I can't do anything.. What do I do to install windows 7? My windows 8 is wiped off the drive and I'm using an external cd drive to run my windows 7 disk.
      My Computer


  2. Posts : 2
    windows 8
    Thread Starter
       #2

    oh and I should mention when I get into windows 7 boot menu. No matter what I seem to do I get the error. Setup was unable to create a new system partiton or locate exsisting partition
      My Computer


  3. Posts : 11,408
    ME/XP/Vista/Win7
       #3

    win 8 to 7
    YES & NO, down to your UEFI/BIOS firmware setting.


    As this is a OEM manufacturer's PC with Pre-installed Windows 8.

    1) Downgrade to Windows 7.
    Downgrade Windows 8 to Windows 7
    Warning you must have the UEFI/BIOS firmware setting in Step Three set.

    Make sure you read the NOTE at Step three.

    2) If Using a USB Pen drive on a PC with a UEFI BIOS.
    USB Pen drive need to be formatted to FAT32 as in
    UEFI Bootable USB Flash Drive - Create in Windows
    Take note of Step 11 for Windows 7.
    Also you will need to use a USB 2.0 port, as there are no USB 3.0 drivers in Windows 7.
      My Computer


 

Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 01:12.
Find Us