Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Issue with the infamous 0x80070570

17 Apr 2014   #1
Naughtmare

Windows 7 Professional 64bit
 
 
Issue with the infamous 0x80070570

Ill start off with the situation;; I am trying to help out a friend with his PC that yesterday lost the OS. When I first got the chance to look at it upon booting it up it went straight to Operating System is Missing. So I went into a windows 7 CD and tried check if the disks are in order and if everything is still there. The computer is a pre built bought system name:
ACER Aspire AX1420G-U5832
Specs:
Win7 Home Premium 64bit
AMD Athlon II X4 645 Quad-Core
NVIDIA GEFORECE 6150SE
1TB Hard drive
4GB DDR3 Mem
Anyway, after booting into the systems HDD I found out that all the files are still there since the size of free space was only about 500gb. I assume he caught some type of virus that messed his OS up. Either way he said he wanted a fresh install. Since he has a Key for Home Premium included, I tried using the partition that came with the HDD/computer to install which didnt work. I downloaded a Win7 Home Premium from Digital River and put it on a USB
Anyway long story short, I get the code 0x80070570

After hours of googling I found this answer VVV

Code:
Unplug all other HD's and peripherals, 

Boot into BIOS setup, reset to defaults, save changes. If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS: if UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with, or enable Legacy BIOS or Compatibility Support Module. Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. 

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt.You are creating the partition here for the purpose of marking it Active which overcomes certain install failures.

This didnt help me either... SO now I put the WD Caviar Green 1TB into my own system
i5 3570k
Asrock z77 extreme 6
670 gtx msi
16gb mushkin enhanced 2x8gb
I unplugged all my drives but the SSD with the OS. Booted in to check if the damn HDD (Caviar Green 1TB) was even good. I formated it to NTFS and diskpart>cleaned it
Now I still get this issue... I dont know what to do anymore. I would love some help ^_^


My System SpecsSystem Spec
.
17 Apr 2014   #2
gregrocker

 

You quote the steps from Overcoming Windows 7 Installation Failures - Windows 7 Help Forums which resolve 90% of installation failures. But you don't quote back the verbatim error message and at which step it appears as requested. Verbatim means type it out word-for-word. Either do so now or google it yourself to see how others resolved it.

What was the UEFI and SATA controller settings status of the mobo when you reset it to defaults and checked that step out? Is there a newer BIOS update on the Acer Support Downloads webpage for that model?

Did you run WD Data Lifeguard full diagnostics scan on hard drive from HD Diagnostic list? I'd follow that with full Disk Check Option Two from System Recovery Options Command Line, after formatting the partition using Option 2.2 from SSD - HDD Optimize for Windows Reinstallation which are the same commands as in the tutorial you quote.

Will Win7 install in the other PC with its native HD's unplugged? If so go ahead and then Adjust Win7 to boot on new hardware with Paragon Adaptive Restore CD . But if the BIOS settings are not correct (AHCI on both PC's, UEFI if indicated) it won't start anyway.
My System SpecsSystem Spec
Reply

 Issue with the infamous 0x80070570




Thread Tools




Similar help and support threads
Thread Forum
Infamous IconCache.db issue/Blank Office 2010 Icons
Ironically, I just found the solution that fixed my problem! I will share it, so anyone else having this problem can resolve it just as easily. Start Menu > Type "winword /r" into the Search Bar > Press Enter, and allow the installation wizard to complete. Done! Problem solved! I have scoured...
Microsoft Office
Need help with infamous FBI Online Agent Virus!
So today I got infected by the FBI Online Agent v2.2 virus. I read and watched many tutorials on youtube and different sites but its hard to follow the steps because when I open folders to delete the file or stop the process, I dont see anything to delete. I tried running Malwarebytes but nothing...
System Security
Infamous happili virus
Hello. Recently I have been infected with the happili virus. It has all the symptoms of other users, with hijacked searched results leading to spam pages. I don't know how long I have it as I do not search on this computer often, but it is still a pain to have. Any help in getting this issue...
System Security
Windows 7.64- The infamous Stop 0x124
Hi there! This is my first post here (kidna feel like a leecher) but I have been dealing with the generic "Stop 0x124" error. My system was running fine, then I got a virus (possibly timebomb, never figured out where it came from) and I 'removed' it with bitdefender. The computer was still having...
BSOD Help and Support
That Infamous 0xc0000001 Error
I've recently made some upgrades to my PC (its getting closer to the doomsday machine I've wanted it to be) and I've made sure they're all compatible, but I'm having trouble installing Windows 7 X64 on my new HDD. I keep getting the 0xc0000001 error and *INSERT RANDOM FILENAME HERE* is missing AS...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:12.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App