Installing win7 on pre inst. win 8 laptop - boot\bcd error

So im having nightmares about this laptop

Model:
Acer E1-510

Secure boot disabled - it only comes with " UEFI " in boot section.

cant change anything else in bios.

I have followed this instruction -> UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with

and i get this error when booting from the USB

https://www.sevenforums.com/attachmen...1&d=1400622544

any thoughts to what i can do, or am i on a mission impossible ?

Hi

I would recommend watching Acer official video guide on how to enable "Legacy" support.

Changing BIOS mode from UEFI to Legacy

Edit:

Further research reveled that Acer released a recent BIOS update for your model which will enable "Legacy" mode. For your convenience, here is the direct download link.

http://global-download.acer.com/GDFi...=ACER&SC=AAP_2

I got this exact issue on my laptop (my pc is mostly work)

Inserted my Installation disk and clicked Repair but I installed off of usb so I had to make one but it only took about 5 hours.

@Anshad Edavana - i will try that right away, thank you in advance.



Thanks !!

So i have installed the bios mentioned above, changed to legacy bios.
Cant install windows from USB = No bootable device -- insert boot disk.

Changed back to UEFI, and now windows loading files, but as soon as i get to windows loading, i get a red bar in the top of the screen, and it freezes.

any thoughts on that ?

Please reply to multiple steps I gave you which were ignored. It would be installed now if you'd interacted like thousands before.

Since you edited your post, i thought you didnt want to see Gregrocker!

Boot mode: UEFI - ( and now legacy cause of the update )
Sata mode: AHCI ( nothing else )

No csm available.

USB stick is formatted with Rufus in this post -> UEFI Bootable USB Flash Drive - Create in Windows

1st attempt. ( Legacy boot mode )
After i updated bios to also support Legacy, the usb stick used as above gives the error " no bootable device "

2nd attempt. ( Legacy boot mode )
Formatted usb stick with rufus to " MBR partition scheme for bios or uefi " this worked on another laptop i have with CSM enabled.

But with the E1-510 acer, it said " no bootable device ".

It seems that when i switch to " legacy mode " it cant see my HDD

3rd attempt: ( Uefi boot mode )
Changed back to UEFI, now the usb stick is loading windows files, but freezes up at " windows loading " with a red bar in the top, see picture.

I cant follow the guide " bypass uefi to install win7 " since the installation progress freezes up at loading windows screen"

I hope this answer your questions, and thanks for helping

It says UEFI Boot for the mode but there are no UEFI devices to choose in Boot Priority order. There should be a UEFI flash stick or DVD choice to boot or it will not install.

What choices appear when you select Legacy BIOS?

Try DVD install.

If you can't get to the step to delete all partitions then boot Partition Wizard CD to Quick Wipe the HD for MBR Legacy install, create Primary NTFS partition to Modify>Set to Active then try Legacy install from DVD.

Hello,
I was having all sorts of weird driver issues, and I solved them by using my 2.0 usb port instead of the 3.0, or eSata port. Hope it helps.