Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Laplink's PCMover dilemna

27 May 2014   #1
Rollo

Win7 Pro
 
 
Force Windows to install on D Drive -Laplink's PCMover dilemna

Hi
I am trying to use Pcmover to move my retail license for Win7 to my new computer with all my programs as already installed. License aside, the problem is that for Pcmover to work fully, the drive letters must correlate - C drive copies to the new C drive , D drive goes to the new D drive.
But my problem is that because the old computer is installed to the D Drive drive bec it is a dual booting machine (Win7 Home - not use on C, and Win7 Pro is on D) and I can't get the new machine to accept a clean install of Win7 to anything except the C drive, which messes up PCMover! I even tried installing a second copy of Win7 to the D drive but bec the CD drive grabs the D letter during installation, - I'm foiled again.
Laplink's tech support can't give me a workaround.
Does any think they might know a workaround?

thanks
Rollo


My System SpecsSystem Spec
.
29 May 2014   #2
gregrocker

 

Win7 always correctly boots on C is its been installed from boot and not from another OS already occupying that letter.

I'd image rather than use that app which I've never heard of. Doesn't it just reinstall programs files and settings into a fresh install?

You'd be better off doing a Clean Reinstall - Factory OEM Windows 7 since reimporting settings is a corruption path into a fresh install, and a clone or image is an old install which may be less than perfect.
My System SpecsSystem Spec
29 May 2014   #3
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Welcome to Seven Forums.
I can't help with PCMover, I haven't heard of it either. I think a much better way would be to make an image of your system, including all drives. Make a WinPE recovery disk and boot from it to restore the image(s) to the new PC.

Imaging with free Macrium
My System SpecsSystem Spec
.

30 May 2014   #4
Rollo

Win7 Pro
 
 
My solution

Thanks to Greg & Britton, I just remembered that Acronis Universal Restore offers this facility- to transfer an installation without the HAL layer. I will lay the image into the drive letter that I prefer, and then I will live happy-ever-after!
Cheers,
Rollo
My System SpecsSystem Spec
30 May 2014   #5
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

I wouldn't fixate on drive letters, rather the partitions you want to use. ID them by the drives serial numbers, size, brand, etc. What ever partition w7 is booted on will be C, no matter what it shows under Acronis or other cloning/imaging software.
My System SpecsSystem Spec
30 May 2014   #6
gregrocker

 

If offered the choice set the drive letter to Automatic, include MBR and Track0, keep the correct partition marked Active during image recovery.

If WIn7 won't start, unplug all other drives, confirm Partition Marked Active to run Startup Repair - Run 3 Separate Times until Win7 starts.
My System SpecsSystem Spec
Reply

 Laplink's PCMover dilemna




Thread Tools




Similar help and support threads
Thread Forum
Laplink PCmover Upgrade assistant
Hey all! Just found an interesting program. Laplink has come up with a system that will move all of you Windows XP programs to your new Windows 7 install. I haven't used this yet. I did clean installs on all of my machines, but I have a friend that wants me to help him with trying this next...
Installation & Setup
LAPLINK v1.1 pc to pc file transfer usb driver
I have a LAPLINK v1.1 pc to pc usb cable, irunning windows 7 64bit but cannot find a driver compatible, Any help greatly appreciated .
Drivers
PCMover
I recently used PCMover to migrate programs, data, and setting from an XP machine to a Windows 7 machine. The good was that no harm was done to Windows 7 as a result of the move. The not so good was that several folders filled with gigabytes of data files were skipped. Had I not had the two...
Software
PCMover
The moving van has a flat tire. I am in the process of moving programs, settings, and files from an XP SP3 machine to a Windows 7 Professional box and trusted PCMover to do the job. On a scale of 1 to 10 I would give it a weak 5. The main problem was that it failed to copy data folders. Why? In two...
General Discussion
Clear font on desktop dilemna
I have been faced with a bit of a dilemna. One one hand, I love to use Windows Dreamscene. On the other hand, however, I hate what it does to the fonts on my desktop icons. See the picture. http://i985.photobucket.com/albums/ae335/trainman238/9-30-20108-17-13AM.png I'm curious as to how I...
General Discussion
Laplink Incremental images,need help
I have Laplink disk image but I just cannot seem to get it to do incremental images.I am pretty sure that I am just not getting it configured properly. So I need a step by step in how to get incremental onto my external drive "E" where I do have a base image of "C". At the moment it is storing...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App