Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Few issues after Clean Install(Win 7) on new SSD

16 Aug 2014   #1
PrasannaSK

Windows 7 Home Premium x64
 
 
Few issues after Clean Install(Win 7) on new SSD

Laptop - Sony Vaio VPCEE23FX
OS - Windows 7 Home Premium x64
CPU - AMD Athlon II P320 Dual Core 2.1GHz
Memory - 8GB (2 x 4gb) DDR3/1066MHz
Graphics Card - ATI Mobility Radeon™ HD 4250 Graphics (max resolution 1366x768)
Hard Drives - Capacity: 256GB SSD


Hi

Thanks to the tutorials and advice from the experts, I was able to successfully install a new SSD and do a clean install of Windows. It has been a month or so and it is working great in general. Although my laptop only supports SATA I and connecting SATA III caps its efficiency and all that, it is still much faster than 5400RPM.

I noticed a few issues (although minor - a little annoying at times) after the clean install.

1. When booting the Windows Animation flickers. It didn't increase the boot time by any means, but still a nice and clean animation would be better than a flickering screen.

2. More annoyingly - my HDMI connection. I own a Samsung Plasma 43" to which used to Connect my laptop to watch movies etc which I was not able to cast. Earlie,r before the clean install - All I have to do is connect and I get a full screen reproduction of my laptop on my tv without any black borders etc.

But, now I never get a full screen reproduction at all. I tried to change it to Extended monitor, Duplicate screen or just project only trying diff permutation and combination of resolution - All I get is is the following
* Mode not supported
* Screen with Black borders or black borders on top or bottom sides

3. When I forget to put my laptop to sleep sometimes, or when I switch it on from sleep mode - sometimes, I don't see anything on the monitor - just a lightly lit black screen and it get's stuck. What ever I do, nothing happens. I have to shut it down by pressing/holding power button and then restart.

4. My Wifi connection gets disconnected intermittently. Although the icon shows full signal on systray, If I hover the mouse pointer over it, it shows "no internet access". I have to either switch off/on the wifi or troubleshoot (it will reset the adapter) and we are good to go.
This happens sporadically. Sometimes every other min until I reboot the machine - sometimes once is a day or two.


I have not replaced any of the drivers as suggested in the Clean install tutorial although my laptop had separate drivers for Wifi.


Appreciate any help on the above issues and thanks in advance for your time.


My System SpecsSystem Spec
.
16 Aug 2014   #2
Ztruker

Windows 10 Pro X64
 
 

Definitely try updating the ATI Mobility Radeon driver and the WiFi driver.
My System SpecsSystem Spec
16 Aug 2014   #3
PrasannaSK

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by Ztruker View Post
Definitely try updating the ATI Mobility Radeon driver and the WiFi driver.
The driver that came with the OS is the latest - when I try to update with device manager.

Or - you meant installing the actual drivers that came along with OEM OS?
My System SpecsSystem Spec
.

17 Aug 2014   #4
gregrocker

 

I'd go to the PC's Support Downloads webpage to compare the Display and Wireless drivers there with the ones you have in Device Manager. Standard VGA display driver is only a placeholder and not meant to be kept except for the oldest hardware which wouldn't be able to run 7 without it.

First enable Device Installation Settings to run all Important and Optional Windows Updates until there are no more offered. This usually settles driver issues and only requires importing those still missing after all Updates are done.

Also, compare the steps compiled in Clean Reinstall - Factory OEM Windows 7 with what you did to see how you might do a better reinstall if necessary.

Otherwise you can go over your install thoroughly and optimize it with the Troubleshooting Steps for Windows 7
My System SpecsSystem Spec
Reply

 Few issues after Clean Install(Win 7) on new SSD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
multiple issues after clean install
Hello guys. I was hoping you could give me a hand here. I was experiencing multiple stop 0x00124 errors on my system. I was told it could have been caused by an overclock. My apu is an a10 5800k with a base clock a nd turbo boost of 3.8 and 4.2ghz respectively. I purchased an r9 280x last...
Hardware & Devices
Clean Install - slow, driver issues
Hi all I recently did a clean install of 7 64bit. Easy enough, no problems. It is terrible. It frequently lags severely just while having multiple tabs open in Firefox. Could this possibly be a driver issue, and if so, what drivers? Also, my computer frequently operates in the 90 degree...
Performance & Maintenance
Clean Win 7 Pro install issues
Installed Windows 7 Pro in this system I built in April 2011. No major issues and has functioned very well. For a little background, I have Win 7 on a Vertex3 drive, data on a Vertex 3 drive and both are backed up to a Seagate drive. I have used the Casper backup programs for years and currently...
Installation & Setup
Clean install of win 7, two times, now boot issues.
Got a new hdd for the wifes laptop, installed windows 7 ultimate 64. Just to find out I typoed the user name at the beginning. Not wanting to be stuck with the registered user name i decided to reinstall the OS. To do my second install, I used gparted live to format my drives c partition, and d...
Installation & Setup
After Clean Install: Battery Charge Issues
Hello! I recently did a clean install of Win7 with help from advice I got here. Thanks again. Now, I seem to be having battery issues. I changed my settings to where I thought I had them before (made a power plan, chose lowest screen brightness for unplugged). But when I unplug the power...
General Discussion
Several Possible Issues: Windows 7 Clean Install
I have an HP m8120n that recently roasted it's HD. I replaced it with a 1TB Seagate Barracuda, and decided to upgrade to Windows 7 Home Premium 32bit. When I install, the system reboots when it's supposed to, then stays at a solid black screen. I have left it for several hours (overnight) and I can...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 22:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App