Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows Cannot be Installed to Disk 0 Partition 1

30 Aug 2014   #71
Zlaxon

Windows 7 professional 32-bit
 
 

Correct it is


My System SpecsSystem Spec
.
30 Aug 2014   #72
Zlaxon

Windows 7 professional 32-bit
 
 

Well my pc says i dont have any network hardware installed
My System SpecsSystem Spec
30 Aug 2014   #73
gregrocker

 

You should be following the steps in Clean Reinstall tutorial which explain how drivers are handled.

Download the network driver to stick or disk and install it, or plug in by Ethernet cable and enable Hardware Auto Updating to see if driver loads.

Look over the steps in tutorial because if you didn't follow them I would start over and do it correctly. You have the chance here to get and keep a perfect install.
My System SpecsSystem Spec
.

30 Aug 2014   #74
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Of course you do, it`s the port where you plug the ethernet cable into, you probably just have to install the driver.

Tell us the exact make and model of your pc, your specs only say HP. Your network driver is most likely Intel as is mine on my HP desktop.
My System SpecsSystem Spec
30 Aug 2014   #75
Zlaxon

Windows 7 professional 32-bit
 
 

I plugged in the ethernet wire but nothing happened i dont have the drivers on a stick so ill have to stop while im ahead i guess


Attached Thumbnails
Windows Cannot be Installed to Disk 0 Partition 1-image.jpg  
My System SpecsSystem Spec
30 Aug 2014   #76
Zlaxon

Windows 7 professional 32-bit
 
 

HP Pavilion Elite HPE-410y
My System SpecsSystem Spec
30 Aug 2014   #77
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

http://h10025.www1.hp.com/ewfrf/wc/s...t=4311963#N547

Then click on Driver original, then Realtek Network driver, this will be it.

http://h10025.www1.hp.com/ewfrf/wc/s...11963&sw_lang=


Stepping out for Dinner now, but you should be fine, many more kind folks here to help you further
My System SpecsSystem Spec
30 Aug 2014   #78
gregrocker

 

Is there some reason why you won't follow the steps in Clean Reinstall Factory OEM tutorial which is linked in signature picture below?

That tutorial will replace the bloated HP factory install with a perfect install if you'll only follow the steps closely, ask back any questions if in doubt, and then stick with the tools and methods given.

Did you enable Hardware Auto Updating from its link in tutorial before plugging in the ethernet cable?

You have put a lot of work into this so I hate to see you fumble the reinstall when you have fully within your grasp the chance here to have a perfect install.
My System SpecsSystem Spec
30 Aug 2014   #79
Zlaxon

Windows 7 professional 32-bit
 
 

I have nothing against the clean install but i cant do hardly any of those steps i have a cd and no internet so step 1 and 2 i cant make a new cd step 3 & 4 i dont want to make back up disks of a default install step 5 again have no internet so cant use belarc advisor step 6 i know my product key and during install it never asked for it step 7 i have no programs i wana save since hd empty i would save the drivers if i had internet connection step 8 i already did my install step 9 no connection so i cant use updates step 10 support download Webpage hmm cant get on there step 11 dont have any programs i need to install atm
My System SpecsSystem Spec
30 Aug 2014   #80
Zlaxon

Windows 7 professional 32-bit
 
 

It would be great not having all the usless stuff thats installed that i dont need but im just stuck at the moment till i can go get drivers for internet connection
My System SpecsSystem Spec
Reply

 Windows Cannot be Installed to Disk 0 Partition 1




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows Cannot be Installed to Disk 0 Partition 3
Then under show details it lists Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu. Windows cannot be installed to this disk. The disk may fail soon. If other...
Installation & Setup
Windows cannot be installed to this disk/unable to create a partition
Hi - I'm trying to do a custom install of Windows 7 on my friend's computer. Needless to say because it isn't mine I don't have full data on what was done to it before. I do know that they used "cleanall" to delete the existing partitions on the disk; and that prior to this, they were receiving...
Hardware & Devices
Windows cannot be installed to Disk 0 Partition 1
I am trying to load Windows 7 Pro the are 2 Partitions when i select any of the 2 i get the same massage that Windows cannot be installed to Disk 0 Partition 1 or 3 depending which i choose i then downloaded Drivers (SATA AHCI Driver) Into my USB the i got a massage No device drivers where found....
Installation & Setup
Windows cannot be installed to Disk 0 Partition 1
Hello good people, I need some urgent help with Windows 7 Home Premium SP1, 64Bit installation process on my brand new ASUS A73TA laptop that came with Free Dos. I managed to boot the Windows 7 disc and everything goes fine until this very point : Where do you want to install Windows: ...
Installation & Setup
Windows cannot be installed to disk 0 partition 1
i have a sony PCVRS220. i replaced the original HD with a 1tb WD caviar black. i am installing win7 and i am up to the "where do you want to install win7" screen. but i get a message "Windows cannot be installed to disk 0 partition 1." any help? thanks edit: i am using a sata to pata...
Installation & Setup
Win7 cannot be installed. Selected disk has an MBR partition
Hi, I'm trying to do a clean install on Windows 7 64-bit on my laptop. I currently have 32-bit Vista running. I initially created a new partition, copies all my data there, then started to do the custom install. I got the message: Some Googling around found the following suggestion:
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:37.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App