Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows Startup Repair from System Reserved partition does not work

25 Aug 2014   #1
Spacedust

Windows 7 Ultimate 64-bit
 
 
Windows Startup Repair from System Reserved partition does not work

When I press F8 and run Startup Repair instead of Recovery console normal Windows is booting.

I have just System Reserved partition and then one C: partition.

Here's my BCD to check - what should be corrected here ?

Quote:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
path \bootmgr
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {584476be-2c26-11e4-9f95-cc33fb0c8bd3}
displayorder {current}
toolsdisplayorder {memdiag}
timeout 30

Windows Boot Loader
-------------------
identifier {584476bf-2c26-11e4-9f95-cc33fb0c8bd3}
device unknown
path \Windows\system32\winload.exe
description Windows 7
locale en-US
inherit {bootloadersettings}
recoverysequence {584476c0-2c26-11e4-9f95-cc33fb0c8bd3}
recoveryenabled Yes
osdevice unknown
systemroot \Windows
resumeobject {584476be-2c26-11e4-9f95-cc33fb0c8bd3}
nx OptIn

Windows Boot Loader
-------------------
identifier {584476c0-2c26-11e4-9f95-cc33fb0c8bd3}

Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7 Ultimate (recovered)
locale en-US
recoverysequence {e817e3b9-2c90-11e4-81b6-806e6f6e6963}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {4574da65-2c90-11e4-b213-806e6f6e6963}

Resume from Hibernate
---------------------
identifier {4574da65-2c90-11e4-b213-806e6f6e6963}
device partition=C:
path \Windows\system32\winresume.exe
description Windows 7 Ultimate (recovered)
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
debugoptionenabled No

Resume from Hibernate
---------------------
identifier {584476be-2c26-11e4-9f95-cc33fb0c8bd3}
device unknown
path \Windows\system32\winresume.exe
description Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice unknown
filepath \hiberfil.sys
debugoptionenabled No

Windows Memory Tester
---------------------
identifier {memdiag}
device partition=\Device\HarddiskVolume1
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes

EMS Settings
------------
identifier {emssettings}
bootems Yes

Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200

RAM Defects
-----------
identifier {badmemory}

Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}

Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}

Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200

Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}

Device options
--------------
identifier {584476c1-2c26-11e4-9f95-cc33fb0c8bd3}
description Ramdisk Options
ramdisksdidevice unknown
ramdisksdipath \Recovery\584476c0-2c26-11e4-9f95-cc33fb0c8bd3\boot.sdi



My System SpecsSystem Spec
.
25 Aug 2014   #2
cyanna

windows 7 ultimate x64
 
 

F8 should get you to a screen where you have several choices, including safe mode. If you boot directly to Windows 7 you might need to press F8 sooner in the boot process.
My System SpecsSystem Spec
25 Aug 2014   #3
Spacedust

Windows 7 Ultimate 64-bit
 
 

My System SpecsSystem Spec
.

25 Aug 2014   #4
cyanna

windows 7 ultimate x64
 
 

Oh. ok.
In boot manager:
Your path to the boot manger is wrong, it should be something like \Windows\system32\winload.exe
Where did you get the GUID for the resume object? I'm not saying it's wrong, just make sure it's right.....
In boot loader:
The first boot loader says device unknown How's windows supposed to know where to read the data from?
The second boot loader only has one entry
The third boot loader had different GUIDs for recovery sequence and resume object

I suggest you try and fix the BCD with no frills first and deal with the recovery console in a second stage
My System SpecsSystem Spec
26 Aug 2014   #5
Spacedust

Windows 7 Ultimate 64-bit
 
 

I've fixed all and now Startup Repair just give me black screen...



Quote:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
path \bootmgr
description Windows Boot Manager
locale en-US
default {default}
resumeobject {716363e6-2c9f-11e4-af17-806e6f6e6963}
displayorder {default}
toolsdisplayorder {memdiag}
timeout 30

Windows Boot Loader
-------------------
identifier {584476c0-2c26-11e4-9f95-cc33fb0c8bd3}
device ramdisk=[C:]\Recovery\584476c0-2c26-11e4-9f95-cc33fb0c8b
d3\Winre.wim,{584476c0-2c26-11e4-9f95-cc33fb0c8bd3}
path \windows\system32\winload.exe
description Ramdisk Options
inherit {bootloadersettings}
osdevice ramdisk=[C:]\Recovery\584476c0-2c26-11e4-9f95-cc33fb0c8b
d3\Winre.wim,{584476c0-2c26-11e4-9f95-cc33fb0c8bd3}
systemroot \windows
nx OptIn
winpe Yes

Windows Boot Loader
-------------------
identifier {default}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7 Ultimate (recovered)
locale en-US
inherit {bootloadersettings}
recoverysequence {584476c0-2c26-11e4-9f95-cc33fb0c8bd3}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {716363e6-2c9f-11e4-af17-806e6f6e6963}
nx OptIn

Resume from Hibernate
---------------------
identifier {716363e6-2c9f-11e4-af17-806e6f6e6963}
device partition=C:
path \Windows\system32\winresume.exe
description Windows 7 Ultimate (recovered)
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
debugoptionenabled No

Windows Memory Tester
---------------------
identifier {memdiag}
device partition=\Device\HarddiskVolume1
path \boot\memtest.exe
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes

EMS Settings
------------
identifier {emssettings}
bootems Yes

Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200

RAM Defects
-----------
identifier {badmemory}

Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}

Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}

Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200

Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}

Device options
--------------
identifier {584476c1-2c26-11e4-9f95-cc33fb0c8bd3}
description Ramdisk Options
ramdisksdidevice partition=C:
ramdisksdipath \Recovery\584476c0-2c26-11e4-9f95-cc33fb0c8bd3\boot.sdi
Reagent does not show proper GUID:

Quote:
C:\Users\Marek>reagentc /info
Extended configuration for the Recovery Environment

Windows RE enabled: 0
Windows RE staged: 0
Setup enabled: 0
Custom Recovery Tool: 0
WinRE.WIM directory:
Recovery Environment:
BCD Id: 00000000-0000-0000-0000-000000000000
Setup Files:
Recovery Operation: 4
Operation Parameter:
Boot Key Scan Code 0x0
REAGENTC.EXE: Operation successful
Quote:
C:\Users\Marek>dir/s/ahs c:\recovery\winre.wim
Volume in drive C is BOOTCAMP
Volume Serial Number is 64CA-D65E

Directory of c:\recovery\584476c0-2c26-11e4-9f95-cc33fb0c8bd3

2010-11-20 18:42 169 213 970 Winre.wim
1 File(s) 169 213 970 bytes

Total Files Listed:
1 File(s) 169 213 970 bytes
0 Dir(s) 74 125 262 848 bytes free
My System SpecsSystem Spec
26 Aug 2014   #6
cyanna

windows 7 ultimate x64
 
 

I have highlighted in red the parts that I think are still not quite right. My comments are in bold. Obviously you have to have a recovery partition with the appropriate files on it in order for this to work....

Quote   Quote: Originally Posted by Spacedust View Post
I've fixed all and now Startup Repair just give me black screen...



Quote:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
path \bootmgr You still don't have a path specified
description Windows Boot Manager
locale en-US
default {default}
resumeobject {716363e6-2c9f-11e4-af17-806e6f6e6963} Are you sure this is correct?
displayorder {default}
toolsdisplayorder {memdiag}
timeout 30

Windows Boot Loader
-------------------
identifier {584476c0-2c26-11e4-9f95-cc33fb0c8bd3} Are you sure this is correct?
device ramdisk=[C:]\Recovery\584476c0-2c26-11e4-9f95-cc33fb0c8b
d3\Winre.wim,{584476c0-2c26-11e4-9f95-cc33fb0c8bd3}
path \windows\system32\winload.exe
description Ramdisk Options This should read Windows Recovery Environment
inherit {bootloadersettings}
osdevice ramdisk=[C:]\Recovery\584476c0-2c26-11e4-9f95-cc33fb0c8b
d3\Winre.wim,{584476c0-2c26-11e4-9f95-cc33fb0c8bd3}
systemroot \windows
nx OptIn
winpe Yes

Windows Boot Loader
-------------------
identifier {default}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7 Ultimate (recovered)
locale en-US
inherit {bootloadersettings}
recoverysequence {584476c0-2c26-11e4-9f95-cc33fb0c8bd3}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {716363e6-2c9f-11e4-af17-806e6f6e6963} Again you have a different GUID here.
nx OptIn

Resume from Hibernate
---------------------
identifier {716363e6-2c9f-11e4-af17-806e6f6e6963}
device partition=C:
path \Windows\system32\winresume.exe
description Windows 7 Ultimate (recovered) Windows Resume Application
locale en-US
inherit {resumeloadersettings}
filedevice partition=C:
filepath \hiberfil.sys
debugoptionenabled No

Windows Memory Tester
---------------------
identifier {memdiag}
device partition=\Device\HarddiskVolume1
path \boot\memtest.exe check this path
description Windows Memory Diagnostic
locale en-US
inherit {globalsettings}
badmemoryaccess Yes

EMS Settings
------------
identifier {emssettings}
bootems Yes

Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200

RAM Defects
-----------
identifier {badmemory}

Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}

Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}

Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200

Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}

Device options
--------------
identifier {584476c1-2c26-11e4-9f95-cc33fb0c8bd3}
description Ramdisk Options
ramdisksdidevice partition=C:
ramdisksdipath \Recovery\584476c0-2c26-11e4-9f95-cc33fb0c8bd3\boot.sdi

Reagent does not show proper GUID:Not sure where you got this part from

Quote:
C:\Users\Marek>reagentc /info
Extended configuration for the Recovery Environment

Windows RE enabled: 0
Windows RE staged: 0
Setup enabled: 0
Custom Recovery Tool: 0
WinRE.WIM directory:
Recovery Environment:
BCD Id: 00000000-0000-0000-0000-000000000000
Setup Files:
Recovery Operation: 4
Operation Parameter:
Boot Key Scan Code 0x0
REAGENTC.EXE: Operation successful
Quote:
C:\Users\Marek>dir/s/ahs c:\recovery\winre.wim
Volume in drive C is BOOTCAMP
Volume Serial Number is 64CA-D65E

Directory of c:\recovery\584476c0-2c26-11e4-9f95-cc33fb0c8bd3

2010-11-20 18:42 169 213 970 Winre.wim
1 File(s) 169 213 970 bytes

Total Files Listed:
1 File(s) 169 213 970 bytes
0 Dir(s) 74 125 262 848 bytes free
My System SpecsSystem Spec
Reply

 Windows Startup Repair from System Reserved partition does not work




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows unable to start - Startup Repair and System Restore won't work
Hello. I've had problem with my friend's laptop (OS - Windows 7 Ultimate). It won't log on to it's fullscreen mode. When I open it, I'm always stuck at Startup Repair error cycle. Here's what happened: I installed Glary Utilities and used it to uninstall the Adobe CS3 Bundle. Then I installed...
Backup and Restore
Installed windows 7 on system reserved partition
http://www.w7forums.com/images/buttons/report.gif 6 Minutes Ago #1 (permalink) Hi guys, It was my first time installing windows 7 so i didn't know anything about system reserved partition. I assumed i should install OS on it so i...
General Discussion
Better to install Windows 7 with or without System Reserved Partition
Is it better to install Windows 7 with or without System Reserved Partition? I prefer to install without the System Reserved Partition but there must be cogent reasons that Microsoft often does the default install with it. I am posing the question to the Experts on this Forum because I couldn't...
General Discussion
Windows 7 System Reserved Partition
I have just restored win 7 with shadowprotect. I restored the 100mb image to a hundred mb partion and then the other image to a second partion. I remove the drive letter from the 100mb eveything works fine and looks like a window setup but the 100mb part. is not system reserved. I want to make it...
General Discussion
Create the Windows 7 System Reserved partition
Here are three options for the creation / use of the Windows 7 System Reserved partition. System Reserved : Create Using Disk Management System Reserved : Multi Boot from Logical Partitions System Reserved : Create for Dual Boot
Installation & Setup
Windows 7 system reserved partition
How do I copy something from the the Windows 7 System reserved partition? :cry::D
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:51.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App