Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Colour calibration screens after Windows logo on install cd.

23 Sep 2014   #1
Manzu

Windows 7 Home Premium x64
 
 
Colour calibration screens after Windows logo on install cd.

All my specs are on my profile (this isn't a new computer btw, it's about 2 years old). I've been trying to install windows on my computer after a drive crash (bought a new SSD) and after the initial loading and the windows logo this shows up.
What seems like a RGB calibration screen, a completely white, a grey and a black screen alternate over and over in a loop. This is the only over instance of the problem I've been able to find, but nothing useful came out of it (I have the same screen, but it doesn't seem relevant since it works fine).
I'm currently using the computer in question running Ubuntu 14 (installed off their live CD) and it works like a charm. I have also tried different install CDs and the same problem occurs. The only other thing which seems remotely relevant is that during the bios screen, the aspect ratio is wrong and part of the text is cut off because of it.
Please. Help me SevenForums. You're my only hope.


My System SpecsSystem Spec
.
23 Sep 2014   #2
Ztruker

Windows 10 Pro X64
 
 

What happens if you boot to Safe Mode or select Enable low resolution video (640x480)?
If it boots then try installing a different video driver, newest or an older one.
My System SpecsSystem Spec
23 Sep 2014   #3
gregrocker

 

You are describing the initial phases of install, correct, and not after WIn7 is already installed?

Either way work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums.

If problem persists try a different monitor, then if that fails try a different video card.
My System SpecsSystem Spec
.

Reply

 Colour calibration screens after Windows logo on install cd.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Infinite 4 Flashing Screens Loop During Windows 7 Install.
Hey Everyone, I built my first ever CPU this past December and I am now running into an issue trying to install Windows 7 Professional 64 bit OEM. I have tried looking up this issue with no luck of finding anyone running into the same problem I have encountered. I am not entirely sure of what...
Installation & Setup
windows 7 freezing at Logo windows after install (UEFI )
windows 7 freezing at Logo windows (Starting Windows Screen) after install (UEFI ) Hi :) i have a problem after install windows 7 64 Bit on my laptop Acer Aspier V3-471G that problem came when the install finish & windows restart it self to login to desktop its freezing at start windows...
Installation & Setup
Acer TimelineU M5-581T| UEFI| Windows 7 install hangs at Logo
hi, i am having a peculiar problem with my newly purchased Acer TimelineU M5-581T laptop. it has 20GB SSD and 500GB HDD and UEFI MB also supports legacy BIOS. it came with Windows-8 pre-installed and had a single drive C:. i needed to partition it and had created drive D: with windows disk...
Installation & Setup
Stuck on Boot Logo After Fresh Install
I wanted to dual boot Win 7 64 with my vista 32 but after the install completes and the computer reboots it hangs on the Win 7 boot logo and then just stays there until i turn off the power button. It's kinda like the problem when you have a USB plugged in and the boot logo hangs except there's...
Installation & Setup
Colour calibration resetting
Hi - I have a new Toshiba laptop with Windows 7. I have only ever used XP, so 7 is a bit of a mystery. Everything on my laptop has a blue cast. When I go into Colour Calibration I can get the colour as I want it, but as soon as I restart the computer the colour defaults back to the original...
Graphic Cards
Windows 7; Need 32 bit Color Calibration
I need 32 bit color to calibrate color & run windows media center; and my video card is not compatible with display driver model WDDM. All my settings & adjustments make everything way too big or way too small and blurry in windows 7. I'm set up with dual boot xp-sp3 and windows 7 build 7000. ...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:28.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App