Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Unbootable after changing to dynamic disk. Win recovery can't see disk

22 Oct 2014   #1
arnoldus

Win 7 x64 Pro
 
 
Unbootable after changing to dynamic disk. Win recovery can't see disk

Hey. I wanted to do a software RAID1 to my current Windows 7 system disk. I saw a few tutorials and guides were this had been done.

I converted my present system disk (2 data partitions + system recovery partition + small boot partition?) into a dynamic disk. I was not able to mirror the disk because of the new Advanced Format sector sizes being different between the disks (old one 512 per sector, new one 4096 per sector). Anyhow.

I rebooted, and got the error "the boot selection failed because a required device is inaccessible"
When I boot the Windows 7 DVD and select repair, it can not repair the boot automatically.
It can not see the disk either.

When I boot into Hiren's limited XP, the Disk Management does only see a Dynamic disk - foreign. I don't know if that's my other disk or my system disk. It sees 1 dynamic disk, the USB stick where Hiren is running from and my CD drive. Screenshot at the bottom.
The Device Manager correctly identifies both disks.

At this moment, I have 2 HDD's connected. Both are 1Tb. One is the Samsung disk, with my Windows install (normally C:\) and a data partition (normally D:\). The other is a data disk (normally F:\)

When I boot into Linux, it does see my files and partitions. But it gives off many errors.

I suppose it's an error with the boot loader or boot partition? How can I fix this?
With the mismatch between sector size, I think I'll have to clone it onto a more recent disk, but it has to work, either as a dynamic or basic disk before I can proceed doing that.

screenshots:
Hiren:
http://i.imgur.com/Osn8wOt.jpg


Linux:
http://i.imgur.com/GLthZrd.png



My System SpecsSystem Spec
.
24 Oct 2014   #2
gregrocker

 

We only see problems with RAID and Dynamic disks here. Dynamic is intended to span a partition across multiple HD's. RAID isn't even redundant since many lose everything if one disk fails. So I would not do it.
My System SpecsSystem Spec
24 Oct 2014   #3
arnoldus

Win 7 x64 Pro
 
 

I wanted to do a RAID-1 (mirroring) for double redundancy, not striping.
My data files already gets backed up to a NAS, but reinstalling software and re-configuring a system is also an annoyance. Hence my interest in a (software) RAID-1. I have RAID-1 on several linux boxes, and it has proven its worth already.

Regardless of my RAID-wish, how do I get the old setup back?
As I've described, Windows 7 setup can't even see the disk anymore.
I've also tried to clone the disk to a new one (4096 advanced format), so I could non-destructively experiment with potential cures, but no dice (the different imaging softwares either can't clone a dynamic disk, or they have troubles with the 512-4096 sector difference).
My System SpecsSystem Spec
.

24 Oct 2014   #4
arnoldus

Win 7 x64 Pro
 
 

I tried the Partition Wizard tool to get the dynamic back to static, as indicated in a guide here on the forum.
However, unlike linux or the Paragon rescue tool, it sees things very differently.
My new disk (which I've tried to clone to, and which should be entirely empty according to the previous two tools) shows up with 3 unformatted partitions.
My old disk, shows up, with no partitions, and unallocated space!

http://i.imgur.com/M33cQC0.jpg
My System SpecsSystem Spec
24 Oct 2014   #5
arnoldus

Win 7 x64 Pro
 
 

I kinda solved it. Still no RAID1 (mirroring) though.

Steps for reference:
1) I cloned the drive succesfully with Hiren's boot, with the CloneDisk 1.9.6 tool. This is the only tool which worked. Clonezilla, Paragon, Partition Wizard couldn't do anything

2) Though Partition Wizard could not see anything (screenshot above), it could change the drive back to basic drive (from dynamic).

3) With Windows 7 DVD, repair, commandline.
Diskpart. active the Windows partition.

At this point, I finally get a new error message, about the BOOTMGR missing.

4) Use Windows 7 DVD, automatic repair. After 2 times of auto repair, it could boot again.

5) I used the WD Align tool to check if the alignment after cloning was alright from the old 512 b/sector drive, which it apparently was.

6) I read all the tutorials and the Youtube videos again, and I still can't see where it went wrong. There are a couple that claim that you can do mirroring/RAID1 succesfully to a Windows system disk.
( here's one from MS, although for the Server editions: http://technet.microsoft.com/en-us/l...(v=ws.10).aspx )

It is not 100% back to normal yet. Windows has now frequently becom unresponsive for a couple of seconds. I don't know if this is maybe a hardware error (new disk), or something setting gone wrong.
My System SpecsSystem Spec
Reply

 Unbootable after changing to dynamic disk. Win recovery can't see disk




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
dynamic disk to basic disk when win 7 is installed on dynamic disk
ok... first time... so i got this cool Hp laptop .... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the...
General Discussion
Dynamic to Basic Disk Conversion to do recovery (have bad registries)
Hay there, I use HP Probook 4530s with Windows 7 64-bit Home Premium x86. I installed the HP Protect Tools, but it made my registry bad and I am unable to delete them. As a result my laptop is slow now and takes a lot of time on Welcome screen when powered on. So, I needed to do recovery...
General Discussion
restoring an imaged dynamic disk partition to a basic disk?
Hi, I have laptop with system (199mb), windows, recovery and tools, so the 4 primary are taken. I created another partition in unallocated space, and it converted the disk and all partitions dynamic. If I image the windows partition with macrium, convert the disk back to basic, and restore...
General Discussion
Convert dynamic disk of a laptop to basic disk w/o reinstalling win
Hello , I have a Dell laptop which came with Windows 7 installed and disk type was dynamic. I need to install Linux(not on a virtual machine) so I have to convert the disk from dynamic to basic . The problem is that all methods require that I delete all volumes and re install Windows . I...
General Discussion
hard disk changed to dynamic type after using disk management
I am facing problem of unable to shrink c drive in my windows 7 home premium.I have read everyone writing in about not to change the hard disk to dynamic type,but after partitioning one time using disk management now all my partitions are dynamic type & I still have 288gb left in c drive. I need...
General Discussion
Changing a Dynamic Disk back to Basic
I was changing some partitions in the Disk Management tool in Control Panel > Administrative Tools > Computer Management, and I accidently changed my boot drive to a dynamic disk (I thought it would only change the volume to dynamic, not the whole disk). According to Windows 7, the OS can't boot if...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:30.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App