Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Clean install from partition via eRecovery tool never finished,BSOD

13 Nov 2014   #1
coffayandtea

Windows 7 Home Premium,64 bit operating system.
 
 
Clean install from partition via eRecovery tool never finished,BSOD

Im not sure what happened to my original OS, but one day after class it just would not load past the login screen. After exhausting all other options to save my system, I finally decided to reformat via the acer eRecovery tool that can be accessed using alt+f10 while the laptop is booting.

The process was long and failed on 3 occasions, during the first failure i was able to boot windows fine and everything felt like it was new but administrator settings were locked away and i could hardly do anything about it. The internet offered me 3 solutions for this, the first was to enable the privileges using computer management, then another suggested i used command prompt while the last told me to search the partition acer eRecovery is located.

I tried all options several times but non of them worked then suddenly on one of my repeated attempts the acer eRecovery tool started all of a sudden and simply picked up where it left off.

the recovery tool then stopped again during the installing cleanup phase. Again I frantically searched for solutions, tried all of them, non of them worked then suddenly eRecovery starts out of the blue and continues to install and finally it reaches the point when it installs sysPrep.

The computer hanged again and I decided to reboot via power button but when the system finally booted everything was unexpectedly perfect. Since then ive redownloaded over 20 programs which were successfully installed without any problem.

Unfortunately while browsing using Google Chrome, the laptop suddenly got a blue screen and restarted. Currently im afraid to continue using my laptop because I fear all the games and programs that im downloading and setting up might end up needing another reinstall soon, please advice


My System SpecsSystem Spec
.
13 Nov 2014   #2
gregrocker

 

First off, that isn't even close to a Clean Reinstall Windows 7. Factory Recovery is the worst install of Win7 one can have, larded with a ton of bloatware and duplicate utilities which interfere with better versions built into the OS. By comparison, a real Clean Reinstall like the one compiled in the blue link is the best install of Win7 once can have.

I would start over and during the booted install described delete all partitions to start fresh.

Everything needed to get and keep a perfect install is in the blue link tutorial.

At the minimum Clean Up Factory Bloatware might be able to recover about half of the performance of a Clean Install.
My System SpecsSystem Spec
Reply

 Clean install from partition via eRecovery tool never finished,BSOD




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 Repair Install screen black before install finished
Hi all Half way through the Windows 7 Repair install the monitor drivers seem to have corrupted. The screen works fine up to the Windows logo on a black background, then the screen goes dead. Everything is still working underneath, key presses seem to affect the hard disk, caps lock works,...
Installation & Setup
Clean install wont partition Disk 0 with system reserved partition
Trying to do a clean install and my Windows 7 Home Premium x64 seems to have an aversion to putting the system reserved partion on disk 0. My HP notebook has two identical disk drives. If I boot up the windows install with both drives unallocated and do a custom install, the window where i select...
Installation & Setup
Cant clean install on partition
Howdy.... before this i have post about my problem on installing Win7 on HP notebook. The error is 0x800057(partition Problem), i already got solve with the problem but after few month the problem came back and now i try t o clean format the notebook , using diskpart but still got same error......
Installation & Setup
Mini Tool Partition Wizard initalize before install win7 ultimate
first of all . thanks barefoot kid. :D what would be the better initalization mbr or gpt? hard drives are 1tb each showing up as basic unallocated 931.5gb raw. would recommend mbr or gpt?:). thinking about mbr. isn't that a ntfs format old master boot record type. would win7 run better...
Installation & Setup
Partition etc for clean install of Win 7 pro
I am new to re partitioning drives and reinstalling OS over existing OS so I need some advise: Currently I have a fairly new computer running Win Vista 32 bit. I have 2 HDD. 400G C drive and 1T E drive. I would like to install win 7 Pro 64 bit on my C drive. Before installing Win 7 ,There...
Installation & Setup
Clean install with partition
I'm currently running the 7100 build and I'm wanting to install 7127 using a new partition. Basically my idea was to create a new partition and install 7127 on that and then uninstall 7100 but keeping my files so I can move then across to the new partition. Thus having a clean install but...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App