Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bare metal install 'reboot and select proper boot device...'

29 Dec 2014   #1
RobertsBrown

Windows 7 Ultimate x64
 
 
Bare metal install 'reboot and select proper boot device...'

Hi All,

The story so far:
2008 server was hit by rootkit virus. Machine was taken to doctor for data recovery. (Raid 5 data set, we had low % hope of recovery) New hardware and Server 2012 replaced old server.

So far, so good.

Now we want to use the old machine as a workstation.
Raid 5 was reformatted as Raid 0. Two volumes on 4 disks.
When we go to boot from a Win 7 Ultimate x64 DVD, we get the "reboot and select proper etc.."

I seems that the IDE DVD drive is not being identified at boot. I have tried the predictable changes to boot order, but have not disconnected anything. We did try attaching a SATA DVD drive, but that was also not identified during the boot sequence.

I don't know that the Rootkit didn't affect the bios...not educated enough to know if that is possible.
At this point this has become a 'hobby level' problem, but I still want to find resolution.

Asus P5Q Turbo, 4 Seagate drives on Raid 0, IDE dvd drive, 3" IDE floppy (unplugged, either/or with DVD drive)

And there I am....


My System SpecsSystem Spec
.
29 Dec 2014   #2
gregrocker

 

Why are you using dated RAID technology, which Win7 doesn't like and we see nothing be problems with? It confers no performance advantage and if you lose one drive you almost always lose all the data. So the only time it makes any sense is if working with huge files like full length movie editing and there are now drives big enough to handle those too.

Pick your fastest drive and follow the steps to Troubleshoot Windows 7 Installation Failures - Windows 7 Help Forums
My System SpecsSystem Spec
Reply

 Bare metal install 'reboot and select proper boot device...'




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Reboot & Select proper Boot device
Hi I am new and created my account for this but will be sticking around. So recently I was playing a game but then feel asleep while playing, when I woke up and turned on my pc this came up. I have been reading and watching videos for about 5 hours and going through BIOS trying to fix it but...
General Discussion
Reboot and select proper Boot Device?? Help!
Windows works fine and no hardware problems. What is this?! So confused right now. BIOS is set so HD boots first. I have no idea. Anybody know what I'm doing wrong or what is wrong whatever it may be?:S
General Discussion
reboot and select proper boot device or insert boot media in select bo
Ok, I have googled this error and see this is common. Hopefully, I have missed something simple. I replaced my hard drive and installed the complete version of Windows 7 Home Premium. All worked great, till the next day when I turned the PC back on. I get the error message: reboot and select...
General Discussion
How do I fix the reboot and select proper boot device.
OwHi everybody i dont know is i should to post this issues here but i need help w/ booting my system build i connected my optical drive and my hdd and when power up everything look OK until goes to the monitor I see this black screen with that message I trying several things but not success how...
General Discussion
Reboot or select proper boot device
I have found plenty of threads with the same problem claiming to be solved but none have manage to fix my problem im afraid, plus i am not technical enough to follow a lot of the instructions so dare not try them. So here is my problem, i was on the internet and it seemed windows crashed everything...
BSOD Help and Support
Reboot and Select Proper Boot Device
I have recently come across this problem. The computer has been running fine for months with no changes at all. I got up this morning, switched on my monitor, and I had a message on my screen, Reboot and select proper boot device or insert boot media in selected boot device and press any key. ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:01.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App