New
#1
Bare metal install 'reboot and select proper boot device...'
Hi All,
The story so far:
2008 server was hit by rootkit virus. Machine was taken to doctor for data recovery. (Raid 5 data set, we had low % hope of recovery) New hardware and Server 2012 replaced old server.
So far, so good.
Now we want to use the old machine as a workstation.
Raid 5 was reformatted as Raid 0. Two volumes on 4 disks.
When we go to boot from a Win 7 Ultimate x64 DVD, we get the "reboot and select proper etc.."
I seems that the IDE DVD drive is not being identified at boot. I have tried the predictable changes to boot order, but have not disconnected anything. We did try attaching a SATA DVD drive, but that was also not identified during the boot sequence.
I don't know that the Rootkit didn't affect the bios...not educated enough to know if that is possible.
At this point this has become a 'hobby level' problem, but I still want to find resolution.
Asus P5Q Turbo, 4 Seagate drives on Raid 0, IDE dvd drive, 3" IDE floppy (unplugged, either/or with DVD drive)
And there I am....