Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: partition problem

27 Jan 2015   #21
samyuth

window 7 ultimate 32 bit system
 
 

please help me to create 1 please


My System SpecsSystem Spec
.
27 Jan 2015   #22
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

I`ve told you what to do.

Just click next, you can use Partition Wizard to work on partitions after you install windows.



Ahhh, now I see the note saying Windows can not be installed to this disk. That`s the problem.

Did you have Windows 7 installed before ?
My System SpecsSystem Spec
27 Jan 2015   #23
samyuth

window 7 ultimate 32 bit system
 
 

any solution pease help me im so thank full
My System SpecsSystem Spec
.

27 Jan 2015   #24
samyuth

window 7 ultimate 32 bit system
 
 

yes
My System SpecsSystem Spec
27 Jan 2015   #25
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

I need you to click on show details in that picture,(post #20) then post a picture of what that says for me.
My System SpecsSystem Spec
27 Jan 2015   #26
samyuth

window 7 ultimate 32 bit system
 
 

here is the picture


Attached Thumbnails
partition problem-1422384747964-1109368025.jpg  
My System SpecsSystem Spec
27 Jan 2015   #27
gregrocker

 

Diskpart failed because you spelled "partition" wrong. You must be precise and double-check your work in all steps here.

Now start at the top and without skipping any work through the steps to Troubleshoot Windows 7 Installation Failures - Windows 7 Help Forums.

After defining an Active partition using Diskpart if it still fails then test your hard drive with the maker's HD Diagnostic extended CD scan, followed by a Disk Check from the disk System Recovery Options Command Line, run on the full disk partition you created in the Failure steps.

Report back results including verbatim error messages and the step in which they occurred.

Once installed activate with the Product Key on your COA sticker. If in doubt about the disk you have be sure to make another one from that step in tutorial.
My System SpecsSystem Spec
27 Jan 2015   #28
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Was Windows 7 already on this disk ?

You didn`t answer me.

OMG Greg, I didn`t notice that, good eyes.

I would also run the clean command on the drive before you create the partition.
My System SpecsSystem Spec
27 Jan 2015   #29
samyuth

window 7 ultimate 32 bit system
 
 

add ram im on touchpad i dont get u r answer quick sry and i had installed with this cd 2or 3 times
My System SpecsSystem Spec
27 Jan 2015   #30
samyuth

window 7 ultimate 32 bit system
 
 

im trying now gregrocker idea.... be right back thx for rply guys thank u very much
My System SpecsSystem Spec
Reply

 partition problem




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Problem in HDD partition
Hello, i have a 500GB HDD in my laptop, i had only C drive so i decided to create one more partition for the documents only, but its kinda not what i wanted, i reserved 150GB for the c drive but somehow its pretty weird and now i cant fix it the C drive shows 149GB in my computer, any way to fix...
General Discussion
Partition problem
Hello lads! I have a bizarre problem with a partition, which appeared out of nowhere. I'll attach some print screens to see what can be done. My problem is that i can't delete it, or even access it. Some guy on another forum said that it could be because of the Office 2010, i doubt it. It...
General Discussion
Partition problem
Recently, i've wanted to create a partition in my hard drives using the paragon partition utilities...but instead it didnt create a partition, when reboot the laptop there are lists of os needed to be choose b4 using the laptop which primary 1 is the windows seven/vista and primary 2 is the...
Hardware & Devices
Cloned Partition has a Problem with source partition
Ok, I cloned my Drive (C) which is Windows 7 to Drive (D) because I want to dual boot Vista on this computer, and the Vista disk will only install on Drive (C) When I cloned my Windows 7 to Drive (D), it acts like its still working with Drive (C)... Anytime I make a change, such as deleting a...
Installation & Setup
W7 Partition problem.
Iím having a problem with W7 Partitions .. because I like to add a data partition. If I delete the first two partitions on this HD Ö My computer does dead. It will not boot to an Acronis Boot CD, or a W7 install DVD .. and I canít even get to the bios set upÖ As long as this HDD is...
General Discussion
Partition problem - Partition deleted or something?
Before Win7 I had Win XP SP3. I did clean installation (deleted Program Files partition and C:\) partition, but somehow, my "Programming" partition got deleted as well. It was 10 GB, and had some VERY important data on it. When I go to Storage Manager, it's shown as part of C: partition, as you...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 12:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App