Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Need help on fixing Windows boot errror status: 0xc000000e

06 Feb 2015   #1
icyfoxy

Windows 7 Professional x64
 
 
Need help on fixing Windows boot errror status: 0xc000000e

Hi, I'm having some trouble with this boot error 0xc000000e. I'm using window 7 pro x64 bit with a uefi gpt ssd setup. I do have the install disk and im am booting to it by uefi boot to disk. However windows startup repair can't fix the boot error or doing a system restore can't ether. On the command prompt i know that disk 1 is where windows is install as well that partition 1 is my system files for the boot. what im having trouble with what is the next step? what commands that I should do? thank you for taking the time for reading and helping me out.


My System SpecsSystem Spec
.
06 Feb 2015   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello and welcome icyfoxy mate I had a very similar problem on my new laptop just last week and if read form post #61 in this Do I or don't I it may be of help to you.

The problem it seems is that 7 is now considered a legacy OS and EUFI for want of a better way of putting it works form 8 onwards so take a look at the thread re my laptop
My System SpecsSystem Spec
07 Feb 2015   #3
gregrocker

 

How did this error arise? What were you doing just before it happened - changing drivers or settings, installing Updates, etc?

Are you installing or trying to install the OS? If so then you can Troubleshoot Windows 7 Installation Failures - Windows 7 Help Forums

If you're trying to repair boot errors on an existing OS that was running OK previously, see if you can System Restore to a working configuration before the problem occurred, from the disk System Recovery Options .

Everything else that can be one is here for Troubleshooting Windows 7 Failure to Start including if necessary rescuiing your files to do a Clean Reinstall Windows 7
My System SpecsSystem Spec
.

08 Feb 2015   #4
icyfoxy

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by ICIT2LOL View Post
Hello and welcome icyfoxy mate I had a very similar problem on my new laptop just last week and if read form post #61 in this Do I or don't I it may be of help to you.

The problem it seems is that 7 is now considered a legacy OS and EUFI for want of a better way of putting it works form 8 onwards so take a look at the thread re my laptop
Thanks for trying help me out but unfortunately this didn't help out. My boot file from my UEFI is corrupted and I'm just trying to replace them from the one off the windows install disk.
My System SpecsSystem Spec
08 Feb 2015   #5
icyfoxy

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by gregrocker View Post
How did this error arise? What were you doing just before it happened - changing drivers or settings, installing Updates, etc?

Are you installing or trying to install the OS? If so then you can Troubleshoot Windows 7 Installation Failures - Windows 7 Help Forums

If you're trying to repair boot errors on an existing OS that was running OK previously, see if you can System Restore to a working configuration before the problem occurred, from the disk System Recovery Options .

Everything else that can be one is here for Troubleshooting Windows 7 Failure to Start including if necessary rescuiing your files to do a Clean Reinstall Windows 7
To be true full I really don't what caused my boot files to get all corruption and no I'm not trying to install the OS all the files are still on the ssd and the ssd is working fine. On the system recovery as said before I had tried to do that but it didn't work.
My System SpecsSystem Spec
08 Feb 2015   #6
icyfoxy

Windows 7 Professional x64
 
 
All Fix.

Well I finally fix my Windows 7 UEFI boot sector by going off from this Repair a destroyed Windows 7 UEFI boot sector | Hasper.info
  1. Delete what is remaining of the Windows boot partition (not the Windows partition but the partition of around 128 MB size) and the EFI partition – you can use GParted for this. In the end, you should have at least 229 MB of free space on your hard drive – preferably at the beginning.
  2. Reboot from your Windows 7 DVD. Make sure you boot the UEFI part of the disk: When you open your boot menu by pressing F8, you will see two entries for your Windows 7 disk. One without “UEFI:” in front and one without. Select the former and then don’t forget to press any key if you are asked to – otherwise, the non-UEFI part would be booted.
  3. When Windows starts from the DVD, select the desired language and then press Shift+F10 to open the terminal.
  4. Now we will create the two missing partitions: the EFI boot sector and the Windows Boot sector. Type into the terminal (but leave the #… parts out – they are only comments by me):


  1. diskpart
    list disk
    select disk 0 #Select the desired disk
    create partition efi size=100
    list partition #Make sure that the 100mb partition is selected
    format quick fs=fat32 label="System"
    assign letter=B
    create partition msr size=128
    list partition #Check for errors
    list vol
    select vol 3 #Use the number corresponding to your windows installation
    assign letter=C
    exit
  2. Now copy the EFI files by typing:
    mkdir B:\EFI\Microsoft\Boot
    xcopy /s C:\Windows\Boot\EFI\*.* B:\EFI\Microsoft\Boot
  3. Now we will set the boot configuration data by typing:
    b:
    cd EFI\Microsoft\Boot
    bcdedit /createstore BCD
    bcdedit /store BCD /create {bootmgr} /d “Windows Boot Manager”
    bcdedit /store BCD /create /d “Windows 7” /application osloader
    #This will return a GUID, referred to later as {guid}
    bcdedit /store BCD /set {bootmgr} default {guid}
    bcdedit /store BCD /set {bootmgr} path \EFI\Microsoft\Boot\bootmgfw.efi
    bcdedit /store BCD /set {bootmgr} displayorder {default}
    #Now it's not {bootmgr} anymore but {default}!
    bcdedit /store BCD /set {default} device partition=c:
    bcdedit /store BCD /set {default} osdevice partition=c:
    bcdedit /store BCD /set {default} path \Windows\System32\winload.efi
    bcdedit /store BCD /set {default} systemroot \Windows
    exit
My System SpecsSystem Spec
Reply

 Need help on fixing Windows boot errror status: 0xc000000e




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD stop 0x000000f4 i/o error status of 0xc000000e?
Hi i have been suffering BSOD for a while now, it all stopped and was okay for a week but has started up again. I get the stop code 0x000000f4. before it crashes i get a box come up saying "the instruction at 0x0000000075912c69 referenced memory at 0x0000000075912c69. the required data was not...
BSOD Help and Support
windows 7 boot manager error 0xc000000e boot selection failed because
My daughter's laptop(acer aspire) has the above error message. we have no installation disc but do have the product key. I created an installation disc from my laptop but it have my product key. A tried to get it to use this cd as the install cd but it appears not to be working, What should I...
Installation & Setup
Windows 7 and UEFI BIOS Boot Manager error 0xc000000e
I just flashed a UEFI BIOS and did a clean install. I'm getting the error 0xc000000e only on reboot. If i shut down and turn on again it boots windows no problem. Please help!
Installation & Setup
Windows Boot Manager error 0xc000000e
Hi all, I am almost too embarrassed to post this but now it has come to the point where I'd rather be embarrassed than smash my laptop on to my head repeatedly. I changed laptops and ended up using a 250gb hdd I had been using as an external hdd as the primary and sole hdd in my old MSI...
Installation & Setup
Boot selection failed...Status 0xc000000e, and my SSD gone from Bios!
Hi there, I am getting since few weeks blue screen error message and computer crash right after that. The problem become very persistent and two days ago I got crash again and at new booting the black screen poped up with a message : ...
Installation & Setup
Windows 7 Boot error 0xc000000e
Hi, this morning when I went to run on my windows 7 32-bit installed PC, I was greeted by an error message saying "The boot selection failed because a required device is inaccessible". This is odd because last night it was working perfectly, with no problems. I've tried several solutions, like...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 13:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App