Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't boot from new SSD unless old HDD is plugged in

17 May 2015   #1
lemmiwinks

win 7 Home Premium 64 bit
 
 
Can't boot from new SSD unless old HDD is plugged in

Upgraded to a new 120GB SSD (C: ) and a 2TB HDD (D: ) recently.

Installed Win7 on the SSD (did the dumb thing and still had the old 70GB HDD plugged in....)

Transferred all my files over from my 70GB to my SSD, happy with how things are going and decided to retire the old 70GB.

Now I can't boot to Windows unless the 70GB is plugged in. Initially I could boot from the 120GB with the 70GB plugged in - but now I need to boot to the 70GB for the 120GB's OS to come up.... Which is very confusing.


Disk 2 missing System Partition?


At first I got a "DISK BOOT FAILURE - INSERT SYSTEM DISK AND PRESS ENTER" - but when I put the Win7 disk in, it doesn't pick it up.

I've ran through various 'fixes' - ensuring boot order, marking the SSD as active, and trying to run Startup Repair off my Win7 disk. I've ran Startup Repair 4 times, regardless that I can't see any disks/OS's to choose from.

Now I'm getting "BOOTMGR.EXE IS MISSING".

When I run Startup Repair off my Win7 disk, it can't see any disks or OS's. BUT, when I browse for drivers it comes up that my 2TB is C: and my 120GB is D:, which should be the other way around.....


So I guess my question is, is there any way to create a System Partition on my SSD without a clean install of Win7?


My System SpecsSystem Spec
.
17 May 2015   #2
GokAy

Windows 7 Ultimate x64 SP1
 
 

You have a couple of different issues:

- Because you didn't remove the HDD while installing OS the boot files remained on the old HDD.
- I guess you can get it corrected if you follow Bootmgr - Move to C:\ with EasyBCD. However, if you messed the boot for good you can still run startup repair (three times if you need to from what I have read here in forums). Startup Repair

Your other problem of no OS seen in System recovery is because your OS drive is not connected to the 1st SATA port. You should start seeing it if you move the SSD to SATA_0 port (check your motherboard manual to see which one is the 1st port). I hope I was clear
My System SpecsSystem Spec
17 May 2015   #3
lemmiwinks

win 7 Home Premium 64 bit
 
 

I'll give the SATA_0 a go now. Thanks!
My System SpecsSystem Spec
.

17 May 2015   #4
lemmiwinks

win 7 Home Premium 64 bit
 
 

Yep, that got it. Repair went through and I'm operating without my old HDD, Cheers mate!
My System SpecsSystem Spec
Reply

 Can't boot from new SSD unless old HDD is plugged in




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
won't boot properly w/ ext hd plugged in
even if i disable the ext. hd in bios on option #3 & option #4, still won' t boot with them plugged in. #1 is windows boot manager, #2 is cd/dvd drive. what am i missing here?
General Discussion
Cannot boot with usb keyboard plugged
Cannot boot with usb keyboard plugged.(was ok before) İf I plug in after boot works fine. So I think is not a port problem ? Tried every port. Upgraded BIOS without luck.
Hardware & Devices
Removed Win 7 drive- plugged into 3.0 USB but won't boot
My HP laptop died but the drive worked. I removed the drive, bought an adaptor to plug it into my USB 3.0 port on my new HP G7 2269wm laptop. It has Win 7 Home Premium but won't boot up on my new computer even though I change the bios to select the port. I don't want to install a new Win 7 over...
General Discussion
W7 freezing during boot with USB KB/Mouse plugged in.
AOTBE, this doesn't happen at all when I have a normal PS2 KB/Mouse plugged in. However when I replace that with USB KB/Mouse there is a problem. This has been happens whether I use my Logitech USB KB with Logitech Mouse. And the same with Razer KB and Razer Mouse. So I'm presuming this happens...
BSOD Help and Support
Will not boot if more than one hard drive plugged in.
I had to do some serious reinstall things. Processor died, had to put in a newer...used one. I checked my ... BIOS/Setup thing, and there was not IDE or Sata choosing for boot order. I have it set up as 1. dvd rom 2. hard drive 3 and 4 are disabled. Everything worked FINE before I put in...
Hardware & Devices
Won't boot with 2nd HDD plugged in
I had an old self-build running XP, and wanted to upgrade the system. I bought new mobo, CPU, PSU, graphics card, SSD drive and Windows 7. My plan was to run Windows and all programs on the new SSD drive, and keep the old one for storage. I installed Win7 on (as I thought) the new SSD drive...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App