Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Repair Install Fails - Disks not properly recognized?

25 Jun 2015   #1
cherold

Windows 7 Ultimate x64
 
 
Repair Install Fails - Disks not properly recognized?

I'm trying to do a Repair Install following this tutorial. When I run Install I get this message: "Windows could not retrieve information about the disks on this computer."

I googled around and found that I should go to services.msc, find Virtual Disk, set it on Automatic (although some posters say set it on Manual), start the service and reboot. This did not help, on either automatic or manual.

The followup suggestion was to go to devmgmt.msc, expand the disk drives, double-click on the drive, choose volumes and, if no volumes are listed, click "populate." But when I do that I get the message, "Volume information for this disk cannot be found." I have three hard drives in this computer and they all return that message.

What should I do?


My System SpecsSystem Spec
.
25 Jun 2015   #2
gregrocker

 

Please post back a screenshot of Disk Management - Post a Screen Capture Image
My System SpecsSystem Spec
25 Jun 2015   #3
GokAy

Windows 7 Ultimate x64 SP1
 
 

May or may not be relevant, so please bear with me

What is the SATA Operation Mode in BIOS set to?
Is your OS disk connected to the first SATA port on motherboard?
My System SpecsSystem Spec
.

25 Jun 2015   #4
cherold

Windows 7 Ultimate x64
 
 

Gregrocker - When I click on Disk Management in Computer Management all I see is, "Unable to connect to Virtual Disk Service." I went into services and saw I'd left Virtual Disk on manual and it wasn't running so I started it, but that didn't help.
My System SpecsSystem Spec
25 Jun 2015   #5
gregrocker

 

It sounds like you're heavily corrupted. Rescue your files now, if necessary using Copy and Paste in Windows REcovery console.

Run a full scan with Malwarebytes and AdwCleaner to see if heavy infection might be causing the corruption.

Then if you already tried repairing System files using System File Checker and they won't repair enough to even run the Repair Install, I'd invest my time now in doing a perfect Clean Reinstall. In the future have a Win7 backup image so you don't need to do a full reinstall.
My System SpecsSystem Spec
Reply

 Repair Install Fails - Disks not properly recognized?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
System Issues and Repair Install Fails
I noticed that my windows update fails. I have tried several fixes to no avail. Windows update reports I have no installed updates as well. I tried to run sfc /scannow and it fails. I tried to do a repair install and during the process it fails and suggests that I run windows update and of course I...
Installation & Setup
Windows 7 Pro 64 bit repair install fails
After having tried for a long time to fix a number of problems (see Not Running Genuine Windows Error 0x8004fe21 for the details), I've tried to do a repair install. This fails however during the "compatibility check" with the following error message: "The following issues are preventing Windows...
Installation & Setup
Windows update fails to install IE10 after repair install
I did a repair install of W7 Ult. x64 SP1. Applied all updates, but if fails to install IE10 update : (as you see it is a dutch version). If have run sure & sfc /scannow. Both report no problems. CBS files are attached. Please help ?
Windows Updates & Activation
Repair Install fails due to WinSetup.dll error
Hi all, I've been having issues with my computer, which are detailed in the following thread: http://www.sevenforums.com/windows-updates-activation/283897-multiple-issues-after-update-sfc-scannow-checksur-logs-included.html I've finally decided to bite the bullet and perform a...
Installation & Setup
USB devices won't install - SFC fails to repair
I noticed recently that USB devices won't install on this PC. I keep getting "Windows requires an interactive Window session" when trying to install devices, but when I plug them into another PC running the same exact OS (on different hardware) it installs fine. The most recent device is a...
Hardware & Devices
directx fails to install after win 7 repair install
Hi, I ran an install over my current win 7 x64 image. I now cannot update directx. I get the following error: An Internal system error occurred. This all started because I'm getting errors when trying to launch games from steam. One of the first things suggested to try is to reinstall...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App