Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Variant of Blue Desktop/Not Genuine Error after HDD Clone

26 Jul 2015   #1
iwontusethis

windows 7 ultimate 64bit
 
 
Variant of Blue Desktop/Not Genuine Error after HDD Clone

Hi,

I have a variant of the common and supposedly easy-to-solve problem encountered when cloning a HDD as part of an upgrade to a larger drive.

As usual the newly-cloned Windows 7 install will not boot properly - stuck on a blank blue desktop with the "Not Genuine" messages. I'm aware that to solve this means reassigning drive/partition letters. This error occurs regardless of how many physical drives are connected alongside my intended drive.

There are several issues rendering the established solutions impossible to achieve via either Windows-based or Paragon RE-based operations:

1. I cannot access task manager, or command prompt, using either ctrl-alt-del or ctrl-shift-esc. This is true when in safe mode and when not in safe mode. Similarly, right-clicks or menu-key clicks render no response. This may be because I use Process Explorer as a replacement for the standard task manager.

2. I formatted my previous install of Windows already so I can't access this. My install media was USB-based, and I wiped this to create a Paragon RE media disc at work. Given the methods I used to obtain a clean iso with no malware or piracy tricks (because MS doesn't let me use my OEM key to download an iso from them) I can't obtain new installation media for Windows 7 at work, and they don't have a copy of Windows 7 install media I can borrow (this whole cloning exercise was undertaken to salvage some of their older, broken PCs while also cleaning and resetting my own)

3. When trying to boot into the Paragon RE, it simply states "Missing operating System" after the post screen, forcing a manual reset or shutdown via the case buttons.

I need the following information:

- is there a method to access the task manager or run a program (I.e. regedit) without using taskman?
- is there another method for accessing a recovery environment, or a way of accessing a command prompt or similarly useful Program, without a USB install media?
- is there a method for creating a boot disk that will actually allow me to access a command prompt attached to the install I'm trying to fix?


My System SpecsSystem Spec
.
27 Jul 2015   #2
gregrocker

 

It's nearly impossible to follow your post and what you've done. I'll try my best:

When cloning or imaging Win7 one must include the MBR, Track0, maintain the Active partition and select Auto Drive letter when and if any of these options are offered. This is one reason we favor Macrium Imaging here which automates all of these settings and lets you just drag the System Reserved and C partition to the target drive.

To repair a clone or image which won't boot, unplug all other hard drives, boot into the Win7 disk or System Repair Disk to confirm that the System Reserved (if you have it) or C (If you don't) is Partition Marked Active
then run Startup Repair - Run 3 Separate Times to see if it will start. If not I'd do it over using Macrium.

In rare cases with blue screen non-Genuine lockout due to drive letter slippage you can correct it following the post here: Moving Win7 Partition to Another Drive
My System SpecsSystem Spec
Reply

 Variant of Blue Desktop/Not Genuine Error after HDD Clone




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
'This Copy of Windows Is Not Genuine' error after hd clone
Hi There First off I guess I should say that I am not very experienced with computers, hardware, software & terminology etc..so I'll thank you in advance for your patience. I recently cloned my hard drive to a new bigger drive using Macrium Reflect & following the instructions given in this...
Windows Updates & Activation
Windows 7 Home Premium not Genuine after HDD to SSD Clone
About a week ago I cloned my old 500GB HDD to a new 512 SSD for the simple benefits of changing to a SSD using Acronis True Image HD 2014. Everything seemed to be going fine, but I started receiving notifications that Windows is not Genuine. MGADiag shows corrupted files, but my Windows 7 was a...
Windows Updates & Activation
After hdd clone to ssd failed to update and window is not genuine
Hi, I successfully cloned my original 500 gb HDD to 240 gb SSD using Macrium reflect. Now I am not able to update windows. Recently a notice popped up and said that the software was non genuine. Diagnostic Report (1.9.0027.0): ----------------------------------------- Windows Validation...
Windows Updates & Activation
After HDD Clone Windows Not Genuine
After installing a clone of my hard drive Windows says OS is not genuine. I tried to use the validation tool but it won't install and terminates with the following error code: 0xC8000247. Diagnostic Report (1.9.0027.0): ----------------------------------------- Windows Validation Data-->...
Windows Updates & Activation
After partition clone Windows is not genuine?
Hello, my 500GB original HDD showed signs of failing so I replaced it with a 240GB SSD. I used Easeus disk clone, cloned the system partition and all went well. The laptop is much faster etc etc. 2 or 3 days later the WGA notice popped up and said that the software was non genuine. (it is...
Windows Updates & Activation
Desktop Error Blue Screen.
I need some help. I don't exactly know what category to put this into. Here is the problem: I turn on my computer and it boots up normally. It shows the login screen and I log in. It usually takes longer to log in than any other account. After I log in it comes up with a blue screen like the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App