Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: difficulties cloning Win 7 hdd to ssd on a two disk dual boot system

29 Sep 2015   #1
Barthos

Win XP and Win 7 64bit each on a different hard drive
 
 
difficulties cloning Win 7 hdd to ssd on a two disk dual boot system

I have two hard drives. the first on C:\ is Win XP. The second drive is Win 7 G:\. I attempted to clone the Win 7 drive to a new ssd but when the operation was complete the system would not boot anymore. It said that there has been a change in the hardware/software configuration. If i remove the ssd and connect the hdd the system boots fine. What am I doing wrong?


My System SpecsSystem Spec
.
02 Oct 2015   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello and welcome Barthos now mate first up -

SYSTEM SPECS

mate can we have some system specs please as what you have postedgives us not that much to work with and given there are so many manufacturersof components and configurations that do influence what goes on within anygiven machine and OS.

http://www.sevenforums.com/tutorials/180324-system-info-see-your-system-specs.html
Now unless I am sadly mistaken Windows uses the C: drive as the primary boot drive and as the 7 drive is G: I think it is still looking for a C: drive to boor from.

What I would do is first decide what OS you want and I would like to know just how you installed 7 onto the second drive with the XP one still hooked up?? We need to clarify just what you did to get this set up.
My System SpecsSystem Spec
02 Oct 2015   #3
Barthos

Win XP and Win 7 64bit each on a different hard drive
 
 

Hi ICIT2LOL

thank you for your rejoinder. i hope you can help me. first off:
system specs:
cpu: i7-860
mobo: Gigabyte p55a-ud4p
ram: Transcend 2x8gb 1600mhz udimm
gpu: MSI n250gts
storage: c:\ 1tb seagate barracuda 7200rpm (win XP)
g:\ 1tb seagate barracuda 7200rpm (win 7)
e:\ seagate barracuda 7200rpm
d:\ wd caviar black 7200rpm
OS: win xp 32 bit (c:\)
win 7 64 bit (g:\)
sound card:RME fireface 800
bios version:

I do not need Win xp anymore, but the system wont boot without the hard drive installed. I created the win xp system about two years ago and then added win 7 about a year ago. All the important data is on win 7. Because the system in question is directly connected to my work I need to backup my data. The logical option was to buy an ssd (Samsung 850 EVO 500gb), clone the OS to it, and then keep the old hdd as a backup. To perform the backup I used acronis true image 2016. Once the cloning operation was completed i unplugged the win 7 hdd and proceeded to boot with the ssd. The boot operation only got as far as the win 7 loading screen. The coloured balls came together and the emblem would just glow with nothing further happening. I tried this twice with similar result. The next step was to run startup repair from the disk but the message I received was that the hardware or software setup had changed.
my question is simple: how do I clone win 7 successfully to an ssd? If we can somehow disable win xp (which I think is the way to go) then it should be solved. But I leave it up to your expertise to show me the way forward.
thank you.
My System SpecsSystem Spec
.

03 Oct 2015   #4
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Before we go any further and to get it right in my mind - I would like to know the exact procedure you used to install the 7 onto the drive it is on.

What I am confused because if I read this right the drive with XP on was connected up at the time and I cannot see how 7 found it's way onto the drive you have it on??

If it had been me I would have installed 7 onto the drive with all the other drives disconnected so that 7 "saw" that empty drive as a C: drive, and then cloned it to the SSD but even that has to be a drive of the same size because unless you personally have some way of cloning a large drive to a small drive it cannot be done.

I think and I know it is a pain but you would be better off by installing the SSD into the machine with all the other drives disconnected and reinstall the 7 to it and then copy across any programs from the other drives as you wish and at your leisure. I am pretty sure the clone is not working because the install onto the G: drive has not installed properly if you had the XP and other drives hooked up at the time.
My System SpecsSystem Spec
Reply

 difficulties cloning Win 7 hdd to ssd on a two disk dual boot system




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
dual boot system (XP & Win 7-64) 7 reboot corrupts disk
Help! I have a dual boot system (XP & Win 7-64) with the Win 7 installed 2nd. I set it up to migrate away from XP. When I reboot the system from Win 7 it restarts and then immediately upon log-on I get a series of errors that the disk is corrupt (most applications trying to load & error 55 in...
General Discussion
Problem cloning XP to bigger drive prior to installing XP/7 dual boot
In preparation for setting up a dual boot XP/7 system on my Lenovo laptop I'm using EaseUS Partition Master initially to clone the existing XP drive to a new larger one prior to creating a new partition (on the new drive) for Windows 7. The new drive is connected via a USB caddy for the copying...
Backup and Restore
Cloning win7 to new sdd for dual boot
Hello. First, thanks to this forum, I have solved many problems over the years on my own. I'm a long time visitor but at my wits end so I decided to join in the hopes of getting my computer running the way I like it. I was running WIN7 + WIN7 and XP as a multi boot system and everything...
Installation & Setup
Win 7 / Win XP Dual boot hangs after cloning to SSD
Hi I'm looking for some help with an issue I've had since cloning my drive. I was originally running Win7 Pro x64 and Win XP Pro x86 on a WD 150GB VelociRaptor, but cloned these partitions to a OCZ Vertex 4 128Gb SSD. Both OS are available at boot up and Win 7 runs fine. However, if I...
General Discussion
Dual Boot Question/Unable To Find System Disk
I currently have two separate hard drives in my home PC. My C: drive has Windows Vista on it and my X: drive has Windows 7 on it. The system is dual booted and if I choose either operating system, it boots fine to whichever OS I choose. My issue is this: If I disconnect one of the drives...
Installation & Setup
Cloning Dual Boot Machine and Question on SSD
Firstly - this forum is the best. I have had amazing help here. Thanks again... OK I have a couple of questions please: 1. I have a FUJITSU MHZ2160BH G2 2.5 ATA Hard Drive which is an moving parts hard drive. Id like to replace this with a Solid State much large hard drive. Are all 2.5 Hard...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:52.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App