Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win 7 Custom Install Crash

24 Nov 2009   #21
ronsco

Windows XP => Windows 7
 
 
If you have PS/2 mouse -- UNPLUG USB MICE !!!

I found also the install would crash exactly as Foot descibes if I had a USB mouse plugged in my desktop!!! My desktop is a Compaq SR2020NX which has a PS/2 mouse port on the motherboard. Stupid microsoft. Reboot with only the PS/2 mouse and it won't crash.

I'm happy now: I have dual-boot setup with WinXP and Win7 on two separate partitions.

ronsco


My System SpecsSystem Spec
.

24 Nov 2009   #22
gregrocker

 

Thanks for the heads up, ronsco!

When you are ready to extricate XP from that dual boot:

Use Partition Wizard free bootable disk to mark Win7 active, delete XP, move Win7 over onto deleted XP space, size as desired. Boot into Win7 installer Repair console and run Startup Repair 3 times.
My System SpecsSystem Spec
24 Nov 2009   #23
Adrian

 

Quote   Quote: Originally Posted by richc46 View Post
Did you use the upgrade advisor, before you started, to be sure your computer has the specs for 7?
Unless his processor is from the stoneage it looks from his specs that he has the horsepower to run it.
My System SpecsSystem Spec
.


24 Nov 2009   #24
gregrocker

 

Product Specifications Compaq Presario Media Center SR2020NX Desktop PC - HP Customer Care (United States - English)

Hope you upgraded your RAM to a gig at least. Otherwise it should be able to run 7 fine.

But always a good idea to run Upgrade advisor since it will spot poss conflicts.
My System SpecsSystem Spec
25 Apr 2010   #25
BuckNutTexan

 
 
Win 7 Install Registry-Write Crash

I have been trying to install Win 7 (32-bit) on a 1st-timer new build (post works fine) and keep getting crash right after "Setup is updating registry settings". Installation goes into repair/recovery/etc. Had installation completed several days ago (working at it part-time...), but repeated crashes resulted in trying to do clean re-install. Problems first time as well, seem to have been fixed by installing drivers in repair mode. Have tried same this time w/o success - may not have used same sequence. Would work from setupact.log log file, but don't know how to read and fix results (have looked).

System specs:
CPU Intel i7-920
Motherboard Gigabyte GA-X58A-UD3R bios.F5 (updated)
Memory 3x2GB GSkill F3-12800CL7T-6GBPI
Graphics Card Gigabyte Radeon HD4850 1GB
Sound Card use mobo for now
Monitor/Display PNP display (no name) max reso 1400x1050
Screen Resolution 1400x1050
Hard Drives 0) OCZ 30G SSD - model OCZSSD2-1VTX30G
1) Samsung Spinpoint 500GB #HD502HJ
PSU OCZ850GXSSLI
Case CM-RC690
Cooling Artic Freezer 7 Pro Rev.2

No joy, need some help. Anyone have some ideas?
My System SpecsSystem Spec
Reply

 Win 7 Custom Install Crash




Thread Tools





Similar help and support threads
Thread Forum
Custom PC BSOD after Java install and Flash install
Good afternoon. I have a custom system with 64-bit Win 7 Home Premium (OEM upgrade from Win XP) Gigabyte 965-P DS3 with Q8200 CPU @ 2.3 GHz, Award BIOS F14 6 GB RAM PCI-E 8400GS NVIDIA card 500 GB SATA Hard Drive Norton 360/Security Suite Office 2007 Just recently did the BIOS, Processor,...
BSOD Help and Support
Accidentally did custom install instead of repair install
I followed the steps and all my settings, software, and everything is gone! I thought it was suppose to keep everything that way it was. Do I have to reinstall everything? Also, I can't read my windows key number at the bottom of my computer since it became worn out. Is there anyway to obtain...
Installation & Setup
Random crash on Win7 Ultimate x64 after starting custom build desktop
I builded a new pc just a few days ago and it crashes after start randomly but usually during surfing on the web .
BSOD Help and Support
random crash custom computer no error given
i have a custom biult computer that keeps crashing at first it said it was a hardware error and recently it hasent given me any error at all. i have windows 7 64 bit 8 gigs of ram currently 6 core 3.3 prossor and a tera hard drive all hardware is brand new and i just installed windows on the hard...
BSOD Help and Support
Custom PC - Can't get a first Install
Hi, I just finished my i3 build and am trying to get my Windows 7 Home Premium to install and am not having much success. First of all, I want to note that I am trying to install from an external DVD-Drive via USB because it's extremely hard to get the Drives out of the old Dell computer. I...
Installation & Setup
modified dll for custom theme causing crash
So I found out how to gain the rights needed to replace shsvcs.dll themeui.dll and uxtheme.dll for the custom themes thanks to this forum, however when I did my computer had a mental breakdown. Got an error at login and didn't get any further. Stupid me had not made a backup, so took me a...
Themes and Styles

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App