New
#1
0xc0000225 boot error after extending partition?-Solved
So basically I have two partitions: Vista C: and Win7 D:, boot file is on C:
I had installed Jolicloud OS on my computer and it carved out a drive from my Win7 partition. later on I EasyBCD to remove grub when I figured out that it will be a pita to get my wifi working. afterwards i booted from the jolicloud installer, then used Gparted to extend the Win7 partition back to it's original size. i then rebooted, and it ran the disk repair, but now Windows 7 won't boot, giving me:
0xc0000225
"Windows did not start correctly. A recent hardware or software change might
be the cause.
If you have aWindows installation disc, insert the disc and restart your
computer. Click system recovery options, and then choose a recovery tool.
(Startup Repair, available in some versions of Windows, can automaitcally
diagnose and fix startup problems.)
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
I've tried to use the recovery feature on my disk, but it cannot see my hard drive and it's not able to locate a driver.
help? Windows Vista is AGONY
also: Easy BCD whe running from Vista says:
i'm going to re add the entry for 7 via easybcd. if you don't hear from me in ten minutes then you will know that this didn't work.There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 10 seconds.
Default OS: Microsoft Windows Vista
Entry #1
Name: Windows 7
BCD ID: {6d574dfa-cef3-11de-a588-9966156464d7}
Drive: Deleted Partition
Bootloader Path: \Windows\system32\winload.exe
Windows Directory: \Windows
Entry #2
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:\
Bootloader Path: \Windows\system32\winload.exe
Windows Directory: \Windows
Last edited by FuturDreamz; 15 Dec 2009 at 16:24.