Unable to install Win 7 - clean install

Plz help me.

For better help with problems, Can you post your specs.
Filling out System Specs
System Info - See Your System Specs

Dont Know What Hardware You Have..??
VistaForums SysInfo Tool - Vista Forums

My pc details- Intel pentium p6100 dual core processor@2.0 Ghz,/-R/RW/3GB DDR3 RAM,25O GB 7200 rpm SATA HDD INTEL HM 55 Chipset, wirless 802.11 G, 1.3 M webcam etc.I get a windows 7 32 bit dish from my IT school.when i instal windows 7 in my pc, 'windows loading files' perfectly complite but 'windows starting' show its pause, i mean stop dish. Plz help

Plz help me

Back up your files, unplug all other HD's and peripherals,

Boot into BIOS setup to see if there is an EFI Boot Disk in BIOS Boot order. If so remove it, set DVD drive first to boot. If EFI BIOS also set to Legacy BIOS. Then set SATA controller to AHCI. Save changes and Exit.

Then boot into installer DVD or flash stick burned or written using tool and latest ISO for your licensed here. Otherwise make sure your DVD is clean and unscratched
How to Boot your Computer from a Bootable CD or DVD

At first installer screen Press Shift + F10 to open a Command Box, type:

DISKPART
LIST DISK
SEL DIS 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.This is a disk you got from your school? Or did you burn it yourself?

Sorry to say, i don't understand . Plz explain this step by step.

Those are steps. If you have questions, ask them.

Sunmoni borah said:

Sorry to say, i don't understand . Plz explain this step by step.

You need to burn the W7 iso ( your version, HP, Pro, Ult, ) onto a dvd with an iso burning program at 4x speed. That is the problem.

All the steps on how to do it have been given by Gregrocker.

Those step i do not understand. Bios setup to see if there is an efi boot disk in bios boot order. Next,when i press shift+F10 ,When entered disk in my pc or not disk in pc. How can i burn iso from any software.

Rightclick on the ISO, select Burn with WIndows Image Burner, or Open With Windows Image Burner.

As an IT student you should know how to enter BIOS setup, by tapping the key given for it on first boot screen.

On the various menus look for a choice for Legacy BIOS to enable.

Next look for BIOS boot order and remove EFI Boot disk from the boot order, replace it with 1) DVD drive and then 2) HD.

Now continue with the steps for install.