Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Help

04 Feb 2010   #1
Dj Gudda

Windows 7 x64

When my system boots the display is left justified so much so that if i run a boot command e.g Alt+F10 i can't see the first part of the boot choices the display is way to the left but when W7 starts there is no problem how can i get my display centred when it boots?
I have a SAMSUNG LD190 my display adapter is G45/G43 Express Chipset

My System SpecsSystem Spec
04 Feb 2010   #2

Windows 7/10 64 bit

When you first start, Windows is not loaded and the Windows driver for the video is not loaded. The video defaults to a basic "VGA mode". If you restart the PC (not a cold boot) is the display OK? The display is only showing what it's getting from the Video.

If you haven't done it, try updating the Intel integrated video drivers and see if that helps. You could also check for an Intel chipset driver update and if there is one install that too.

The problem could even be BIOS related. Try resetting the BIOS and see if that helps. You didn't list the PC or the motherboard but on many just removing the BIOS backup battery for about 10 minutes will reset the BIOS.
My System SpecsSystem Spec
04 Feb 2010   #3


Make sure you have the latest BIOS update for your model computer.

Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS

If prob persists, check the settings in BIOS setup to see if changing one can remedy it. Be careful changing settings; note which one was changed so you can change it back if necessary. Ask back here if you have any questions.
My System SpecsSystem Spec

04 Feb 2010   #4

Windows 7 x64

Have you checked the menu on your monitor and used the size or position controls to adjust it?

What type of connector are you using for the monitor?
My System SpecsSystem Spec
04 Feb 2010   #5
Dj Gudda

Windows 7 x64

using VGA can only access monitor menu in Windows not during boot only can use Auto Adjust but it only moves about a millimeter to the right, i checked n saw that I have
Total Available Video Memory : 1695MB
Dedicated Video Memory: 64MB
System Video Memory: 0MB
Shared Video Memory: 1631MB
Wud the fact that i have 0MB for system video memory have anything to do with it n if so what do i do?
My System SpecsSystem Spec


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:31.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App