Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Daul boot with a Raid 0 setup issue

18 Feb 2010   #1
chou560

Windows 7 64 bit
 
 
Daul boot with a Raid 0 setup issue

I have a raid 0 array setup with two SATA drives that have Windows 7 32bit installed on it then I have another SATA single drive with windows XP 32bit installed on it.

I'm able to boot from windows 7 just fine but not XP.

Any help is appreciated.


My System SpecsSystem Spec
.
18 Feb 2010   #2
Stevy22

Windows 7 and MAC
 
 

Is that an external Hard Drive
My System SpecsSystem Spec
18 Feb 2010   #3
chou560

Windows 7 64 bit
 
 

No they are internal drives
My System SpecsSystem Spec
.

18 Feb 2010   #4
Stevy22

Windows 7 and MAC
 
 

So is giving you any error messages
My System SpecsSystem Spec
18 Feb 2010   #5
chou560

Windows 7 64 bit
 
 

Xp starts-up screen comes on for a 10 to 15 seconds then the computer reboots. It goes by very quick the blue screen with some text on it too quick to read it right before it reboots.
My System SpecsSystem Spec
Reply

 Daul boot with a Raid 0 setup issue




Thread Tools




Similar help and support threads
Thread Forum
RAID Setup - Alienware - A few setup questions?
I have just finished moving my OS from a 3TB hard drive to an SSD. I now have 2 matching drives that I would like to set up as a RAID array. A couple of questions: 1. Do I need to backup the data that will be on the RAID before setting it up and then move it back once it has been setup? 2. Do...
Hardware & Devices
How to setup raid 0 with SSD
Hi, I recently bought my new computer, and it came with two RealSSD C300 256 GB. I want to set up raid 0 to have one drive with 512 GB. I really don't mind the performance boost, i just want to have one partition with 512 GB. I already have it on RAID mode, but whenever the Marvel screen...
General Discussion
Win 7 raid 0 setup / missing raid controller driver
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when...
Drivers
Best Way to Setup SSD Raid 0?
hey everyone! i searched but couldnt find the answer to what i was looking for. currently i am running a raid right now with my 2 old 500gb HDDs (friend set it up on my computer before). i have 2 new 128gb SSDs sitting here that i would like to setup to raid and replace my win7 onto that (clean...
Hardware & Devices
Remove Vista from Daul-Boot with 7q
Hi, sorry if I put this in the wrong category, I'm new here! :) I recently did an install of Windows 7 (a clean install) and accidenlty selected to dual boot somehow (I chose to install 7 on the D drive instead of C, where Vista is installed) I do not want Vista anymore. How can fix this? ...
Installation & Setup
daul boot win7 then xp
i have 7 installed with a extra 50 gig of space on a separate partition.How would i install xp to that partition.Will i have to remove 7 then and xp then put 7 back on.
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App