Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 didnt finish...

21 Feb 2010   #21
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Recovery Process from backup partition can stop on iXtreme.

Take a good look at this.

Software - Recovery Process from backup Partition can stop on some Belgian iXtreme systems - topic_01931 - Information and Instructions - iWork - platform_danube_iwork - Desktop


My System SpecsSystem Spec
.

21 Feb 2010   #22
gregrocker
Microsoft MVP

 
 

It uses the F11 key at boot to trigger Recovery partition. Try rebooting and tapping that key.

My System SpecsSystem Spec
22 Feb 2010   #23
Boxerman

Windows 7
 
 

Guys!

Just wanna start off by saying a BIG THANK YOU to all who replyed!!!

Means alot..

after a bit of googling.. and burning disks etc...

If you need to run Packard Bell Recover Management with currept hard drive...

Hold ALT and keep tapping F10!

Work for me! just waiting to see if it fixes the problem!
My System SpecsSystem Spec
.


22 Feb 2010   #24
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by Boxerman View Post
Guys!

Just wanna start off by saying a BIG THANK YOU to all who replyed!!!

Means alot..

after a bit of googling.. and burning disks etc...

If you need to run Packard Bell Recover Management with currept hard drive...

Hold ALT and keep tapping F10!

Work for me! just waiting to see if it fixes the problem!
Good luck, hope it works.
My System SpecsSystem Spec
Reply

 Windows 7 didnt finish...




Thread Tools





Similar help and support threads
Thread Forum
Windows 7 64 bit won't finish installing
Hello all, Long time no post I know. But everything has been working fine, until lately. I have a PC with an MSI 890FXA-GD70 MoBo, AMD X6 1075T Phenom II processor, with a Muskin 223GB SSD, powered by a Thermltake 850W PSU with 4gigs of RAM. Over the last few weeks the system has started...
Installation & Setup
windows didnt boot up after update.error 0xc0000225
windows didnt boot up after update. error 0xc0000225 info: The boot selection failed because a required device is inaccessible. how can i fix it ?
Windows Updates & Activation
Dual boot - when I wanted to turn on windows it didnt show anything
Hello to everyone, I have a HP Pavilion DV6 laptop, recently I wanted to do a dual boot system, to install MAC OSX and leave my windows 7 intact.I created a partition inside volume C withh shrink option (50 Gb) and formated.Then I did install Mac OSX with a bootable cd (iBOOT 2.7) and after that...
Installation & Setup
Windows will not finish install
So this is a fresh install on a brand new system and it will not finish install. It boots into the installer and goes to the second reboot where it says finish instalation and then reboots and it's a constant reboot and says windows has detected a hardware problem or something to that effect. ...
Installation & Setup
cant finish installing windows 7
can anyone help.. everytime i install windows 7 x64 i always got blue screen i dunno why it appears... it appears during the finalization of the installation.....here are the specs of my pc..... Athlon64 X2 5000+ 4x 2gig ddr2 ram seagate 80 gig ATA Asus M2A-VM board Samsung DVDRW thanks...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App