Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 didnt finish...

21 Feb 2010   #1
Boxerman

Windows 7
 
 
Windows 7 didnt finish...

Hi guys!

I was using my computer all day today.. then decided to put new graphics card in(was going to wait and do it tomorrow) anyway i put it in and then turned computer on.. all good, till it got to the Loading Screen.

Just crashed everytime there!

So i went to Repair and did a full wipe and just as it finished it start loading and it said applying settings on a loading screen....

Then my youngest turns the power off! ( he will pay )

now my problem is that its looping at the loading screen to tell me that the OS just doesnt wanna load!

how do i fix this??? i dont have a CD brought from PC World at Christmas!

I would rather fix it here before sending it away!

Can any help please?


My System SpecsSystem Spec
.

21 Feb 2010   #2
Jonathan_King

Windows 7 Professional x64
 
 

Welcome!

Sounds like that video card is giving you trouble. Remove the card, and reinstall Windows.

After that is all done, and Windows is working right, install the card again. Reboot in Safe Mode, and go into Device Manager to make sure you have the latest drivers for your card.

Good luck!
~JK
My System SpecsSystem Spec
21 Feb 2010   #3
Boxerman

Windows 7
 
 

The thing is... i took it out as soon as the problems started!

and because it reboots on the loading screen the installer didnt install all of Windows 7 on the hard drive!

what do i do? i have no disk! i used the Repair on windows 7.. no i cant find it when i load up as i cant get it past loading screen
My System SpecsSystem Spec
.


21 Feb 2010   #4
Jonathan_King

Windows 7 Professional x64
 
 

Follow the instructions here for creating a Repair Disc. You may need to use Option 2 if you don't have another 7 machine
My System SpecsSystem Spec
21 Feb 2010   #5
Boxerman

Windows 7
 
 

I do have a windows 7 laptop... but im using a desktop... could that help?
My System SpecsSystem Spec
21 Feb 2010   #6
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by Boxerman View Post
I do have a windows 7 laptop... but im using a desktop... could that help?
How far have you gone with Jonathan_King's good advice.
My System SpecsSystem Spec
21 Feb 2010   #7
Boxerman

Windows 7
 
 

Quote   Quote: Originally Posted by theog View Post
Quote   Quote: Originally Posted by Boxerman View Post
I do have a windows 7 laptop... but im using a desktop... could that help?
How far have you gone with Jonathan_King's good advice.
pardon?
My System SpecsSystem Spec
21 Feb 2010   #8
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by Jonathan_King View Post
Follow the instructions here for creating a Repair Disc. You may need to use Option 2 if you don't have another 7 machine
How far have you gone with Jonathan_King's good advice.
My System SpecsSystem Spec
21 Feb 2010   #9
Boxerman

Windows 7
 
 

about to burn disk now mate
My System SpecsSystem Spec
21 Feb 2010   #10
Boxerman

Windows 7
 
 

I got no disks... so put it on MicroSD card and got my computer boot from it...

its doing nothing.. sitting on a black screen with blinking cursor...
My System SpecsSystem Spec
Reply

 Windows 7 didnt finish...




Thread Tools





Similar help and support threads
Thread Forum
Windows 7 64 bit won't finish installing
Hello all, Long time no post I know. But everything has been working fine, until lately. I have a PC with an MSI 890FXA-GD70 MoBo, AMD X6 1075T Phenom II processor, with a Muskin 223GB SSD, powered by a Thermltake 850W PSU with 4gigs of RAM. Over the last few weeks the system has started...
Installation & Setup
windows didnt boot up after update.error 0xc0000225
windows didnt boot up after update. error 0xc0000225 info: The boot selection failed because a required device is inaccessible. how can i fix it ?
Windows Updates & Activation
Dual boot - when I wanted to turn on windows it didnt show anything
Hello to everyone, I have a HP Pavilion DV6 laptop, recently I wanted to do a dual boot system, to install MAC OSX and leave my windows 7 intact.I created a partition inside volume C withh shrink option (50 Gb) and formated.Then I did install Mac OSX with a bootable cd (iBOOT 2.7) and after that...
Installation & Setup
Windows will not finish install
So this is a fresh install on a brand new system and it will not finish install. It boots into the installer and goes to the second reboot where it says finish instalation and then reboots and it's a constant reboot and says windows has detected a hardware problem or something to that effect. ...
Installation & Setup
cant finish installing windows 7
can anyone help.. everytime i install windows 7 x64 i always got blue screen i dunno why it appears... it appears during the finalization of the installation.....here are the specs of my pc..... Athlon64 X2 5000+ 4x 2gig ddr2 ram seagate 80 gig ATA Asus M2A-VM board Samsung DVDRW thanks...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:05.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App