Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Unable to install 7077 x64


14 Apr 2009   #1

Win 7 x64 7137
 
 
Unable to install 7077 x64

After reading in the forum that 7106 is not worth the d/l, I went ahead and d/l 7077. I am currently running 7068 x64 after having upgraded from each previous build starting from 7000.
For some reason, 7077 wont upgrade from me. It stalls after the first reboot and the last portion of the install, I believe it said "adding devices..." I never see the percentage build up, just the smalls dots going back and forth.
Killed the install and had to use the rollback option.
I did see the sticky above and wonder if it could be my nvidia driver, I have the latest official ver. which is 185.20.
thxs
darco


My System SpecsSystem Spec
.

15 Apr 2009   #2

 

You're not the first - and no one is quite sure if it is just that particular build, that particular release, or something left over from multiple upgrades that is simply getting in the way.

I personally somehow instinctively knew to go with a clean install - and it was worth it. Of course, with my setup, it is a lot easier than, say, on a laptop with a single drive....
My System SpecsSystem Spec
15 Apr 2009   #3

Win 7 x64 7137
 
 

Thxs for the reply....I remember with 7048 it wouldnt install either, matter of fact, it hung at the exact same part that its doing now. I re-tried it a week or so later and it went thru fine???...Also I am running the setup.exe from the hdd so I may burn a cd and try from there.....

darco
My System SpecsSystem Spec
.


16 Apr 2009   #4

 
Need to install Build 7077 - 7000 bootable dvd damaged

My Build 7000 DVD is damaged at the install.wim file (like many others so I have read). I had another thread running called a Security Promlem -- and More!!! about a strange virus which had caused endless problems.

I sold that laptop, bought a new laptop, and -- save the lectures and the laughing for the end of your reply posts please -- within 10 minutes of booting into native Vista on new laptop, you would think I never used a PC before because a flash drive I had used on the old laptop (which I had used at internet cafes since), didn't set off any spidey-sense -- and I popped it into a USB port, saw a momentary flicker, and I had my old friend back....I do not think it is Conflicker.C, but I do know it is a P2P worm that uses encryption and is extremely difficult to get rid of.

I read however that these worms do not care much for 64 bit machines, and since my new laptop was an AMD 64, I thought that I would install the 7077 64 bit version.

Since the Vista that was bundles with the laptop eventually crashed after I reinefcted it, I had no other OS exceot for Ubuntu 8.10. iIt is a 32 bit operating system, and it is quite apparent that this worm (actively controlled by another computer or scripts from that computer has infiltrated Ubuntu as well, although it is far less of a problem in Linux.

So.... now that I have downloaded 7077 and burned to DVD (in Ubuntu), it will not boot. It looks correct, but it never goes anywhere.

I do not know if the torrent I used is bada (anyobe's help on this would be appreciated), or if this is something that is too difficult with Ubuntu as the OS creating the DVD and somehow not creating in correctly.

Please help....!

Paul
My System SpecsSystem Spec
16 Apr 2009   #5

 
 

It could be that Ubuntu does not add the 'Bootable' option when burning (i may be wrong). You could try the latest version of PowerISO (4.4) that is available, if it runs that is, i'm not familiar with Ubuntu i'm afraid.

Silly question but have you looked at the BIOS settings as to what the boot sequence is currently set to? Is it doing anything at all when you restart with the DVD in?
My System SpecsSystem Spec
16 Apr 2009   #6

Win 7 x64 7137
 
 

I burned my .iso in Win 7 and the disc boots up fine but I get a message about a Cd/dvd rom driver is needed? I do a browes or a rescan, doesnt find it..ay ya ya......

darco
My System SpecsSystem Spec
25 Apr 2009   #7

Win 7 x64 7137
 
 
Clean install

I was previously on 7068 x64 and was trying to upgrade to 7077 x64 but couldnt. I have a thread in here somewhere on that. I figured I would just wait for the RC. Last nite I went ahead and did a clean install and sure enough it seemed to halt at the exact same part as 7077!!!...but wait it kicked in and installed! I used my external hdd and total time was less than 25mins. Win 7 7100 x64 is alot faster switching to my drives/folders and loading up webpages....

Happy camper!

darco
My System SpecsSystem Spec
Reply

 Unable to install 7077 x64




Thread Tools



Similar help and support threads for2: Unable to install 7077 x64
Thread Forum
Upgrading from 7077, which build to install? General Discussion
Lockup after install of build 7077 Installation & Setup
Install 7077 x64 on XP 32-bit Installation & Setup
Fresh install, build 7077 is super slow -_- Performance & Maintenance
Fastest 7077 Clean Install Method? Installation & Setup
Should I install Build 7077 or 7000? General Discussion
HP DV2613tu install success with 7077 !! General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:51 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33