Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Dual boot with XP SATA driver issue and no floppy

06 Apr 2010   #11

windows 7

I finally got around to doing this.

I created the new partition and I slipstream the drivers into my copy of windows XP (sp0)

I put the cd into the drive and restarted the computer.

I hit a key to boot from the disk , it copied all the files and said it was starting windows.
Then I get a blue screen with this error:

PCI.SYS - Address F748EOBF Base at F7487000 , DateStamp 3B7D855C

Any idea what this is ? What to do to get fix it?

My System SpecsSystem Spec

10 Apr 2010   #12

windows 7

I have a floppy disk now, I put the driver (controller) onto a disk

I put the cd into the drive and restarted the computer.

I hit a key to boot from the disk , I also hit the F6 button when it ask

It starts to copied the files, then i see the screen to add the drivers

I add the drivers , hit enter to complete the copying of the files

when it finish copying and it said starting windows.

Then I get a blue screen:

What am I doing wrong????? What to do to get fix it?
My System SpecsSystem Spec
10 Apr 2010   #13

Windows 7 x64

When I did mine, there were several choices as to type of chipset and such. I had to make sure the one I chose agreed with the chipset in my system. Attached is a list of files on my floppy.

I also have a floppy made by TEAC, an FD-05PUW. I can't remember if I had the floppy controller turned on in the bios, but I think I did.

Attached Images
My System SpecsSystem Spec

10 Apr 2010   #14

windows 7

Hi Saltgrass

I can't get it to get pass the "starting windows" then I get the blue screen.

This is what I have done:

Picture below of what device manager looks like.

I created a partition. Below is what it looks like in disk management

I got the drivers from Intel Download Center ( do I need 32 bit or 64 bit????)
Put them on a disk. Below picture of the files and how I selected it.

I put the OS cd into the computer

re-started the computer - hit enter to boot from the cd and F6 to load the driver from floppy disk

I load the driver and hit enter to finish loading the files.

It said stating windows.

Them I get the blue screen-disk_st.jpg




My System SpecsSystem Spec
10 Apr 2010   #15

Windows 7 x64

What is the 14.65 G Recovery partition? Since it shows system, it is just like the System Reserved partition Win 7 adds. You probably need to put a drive letter on it as the tutorial suggests. If you do not, XP cannot find itself, but this normally results in another type of message. Since it is not a Win 7 partition, I do not know if this will effect your sytem, but you can take the drive letter off later.

There is an alternative where you set the XP partition active, but you show it as a logical partition and cannot do that.

The files you have look correct. When you select the .inf file in the F6 install, how many options do you get for chipsets? It should say the same thing as your Device Manager setting. I think I was given 4 options with my Intel 4 chipset..

You use a 32 bit for a 32 bit version of XP...
My System SpecsSystem Spec
10 Apr 2010   #16

windows 7

Saltgrass , Thanks for getting back to me

I will add a letter to the recovery partition and see what happens.

Are you saying that I have to change the partition from logical to active?
Can this be done or do I have to deleting it and adding it back in?

I get 4 option choices and I picked the one that is like the one in the device manager

Thanks , Again
My System SpecsSystem Spec
10 Apr 2010   #17

Windows 7 x64

No, you do not have to make the partition primary, but if you you are not looking to add partitions, you could. Use Partition Magic if in the future you desire to change it, or do what you suggest.

This is not related to your current install situation.
My System SpecsSystem Spec
24 Apr 2010   #18

windows 7

I finally got WinXP to install. To get it to install I had to change a
setting in my bios from AHCI to ATA. (in bios - advance - sata operation)
This work fine installing the software (XP).

But one problem. I can't boot into windows 7 without changing the setting
back to AHCI and into Winxp without changing it to ATA.

Does anyone know a way to get around this?

My System SpecsSystem Spec
24 Apr 2010   #19

Windows 7 x64

You can Google for adding AHCI to XP after installation. I did it once a couple of months ago and it worked, sorry I do not remember the exact site I used for instructions.

In Win 7, all you have to do is change a registry entry, but it might be more complicated in XP.

If you can't get it to work, I will try to do it again.
My System SpecsSystem Spec
25 Apr 2010   #20

Microsoft Community Contributor Award Recipient


My System SpecsSystem Spec

 Dual boot with XP SATA driver issue and no floppy

Thread Tools

Similar help and support threads
Thread Forum
PCI SATA Extender card driver download issue Win 7 64-bit
Hi, I'm battling trying to find a working driver for this PCI card, its a "CHRONOS MP6421", the device is displaying in DeviceManager as a unknown device but the driver disk that came with the card only supports up to vista, they have a sticker on the package though that says supports WIN7.....
Hardware & Devices
Finding SATA driver for Win XP dual boot - Intel 5 series/3400 chipset
I'm trying to install Windows XP SP3 as a dual boot on my Windows 7 laptop (Asus U33JC). I'm following this tutorial: The computer has a SATA hard drive (not supported by XP), so I need to create a Win XP...
General Discussion
Can you tell me which SATA driver I need for dual boot?
I just bought a new laptop with Windows 7. I am trying to slip in SATA drivers in an XP disc to perform a dual boot into XP to run XP programs on my new computer. Don't I need the drivers for my new computer? Not my old computer, right? So I need the drivers for Windows 7 with a 500MB...
Installation & Setup
Dual boot W7 (internal HDD) W2008 (e-sata)
Hi, For a project I need to have W2008 running for a while, preferably on a physical machine. So I'm exploring this route before going virtual. This is the setup: HP 8530w laptop 200Gb internal sata HDD 8 Gb RAM External sata HDD Windows 7 is installed on the internal HDD. I'd like to...
Installation & Setup
Dual Boot - XP on First Drive (SATA) Win 7 Second (IDE)
Greetings All, I am running XP on a SATA HDD. I have installed Win 7 on a second partition with some problems. The main problem was random BSOD's. This I believe, I have traced back to the fact that the MoBo runs Nvidia chips. Have downloaded the updated Nvidia Win 7 chip drivers. So, I...
Installation & Setup
Dual Boot Issue (Lost my Dual Boot Menu)
Hey Guys, So I just got my hands on Windows 7 and wanted to play around with it, and everything works but: Previous Computer Setup: I had a dual boot with XP and Vista that worked perfectly (both OS's were on separate HD's and worked / booted correctly.) Drive C: --------> Vista (Now...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:52.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App