Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: MBR Question

26 Apr 2009   #1

Windows Vista x64bit
MBR Question

I have a question I was hoping someone could answer.

I bought an adapter that would allow one of my Hard Drives to be accessed via USB. I bought one and it works great, but I decided to install Windows 7 Ultimate build 7068 and my computer said that it could not install a fresh copy of Win 7 unto a USB device.

Okay, if that was the problem I decided to remove my CD RW drive and connect the hard drive instead. I then connected the CD-RW drive to the USB adapter and it worked perfectly. I was able to use the CD drive to install onto the hard drive.

I then decided that I didnt want to have my computer looking like a disassembled piece of junk, so I thought, "Hey, why not reconnect everything how it was, and just boot up Windows 7 from USB".

I put the computer back together nicely, but upon boot options it gave me 2 options:

Windows 7

So I chose Windows 7 only to have the computer reboot. Am I doing something wrong? Did I mess up the Main Boot Record since Windows 7 was installed from IDE instead of being connected from USB?

Is there a way to get my computer to allow me to boot up without the restart?

Let me know if anyone has any ideas or needs any more relevant information.

My System SpecsSystem Spec
26 Apr 2009   #2

Windows 2000

My problem is different from yours, but I would certainly appreciate feedback, especially from those who know what they are talking about.

I installed Windows 7 build 7077 x64 on my PC (which have fairly modest specs: Intel Core 2 Duo, Gigabyte MOBO, 2GB RAM, 160 GB Western Digital HDD, Nvidia 8600 graphics card.

I have a 1 terrabyte Samsung HDD where I store ISOs of Office, Encarta etc. I also store in it drivers for various machines I have: Samsung NC10, Samsung Q1U, Averatec 2260, Intel D865PERL, Intel D845EBG2, and the above Gigabyte. The problem with drivers is that I have to keep x86 as well as x64 versions, XP/Vista. Averatec support on the x64 side is really lamentable, thanks for W7 I managed to get all the drivers installed.

During my Gigabyte installation of W7, because I needed the drivers and ISOs to install a lot of software (I am a hopeless student of the game of chess), I installed the Samsung HDD. Afterwards when everything was done I removed the Samsung.

Mind you never in my life have I been installing and installing and installing OSs before Windows 7 came. From build 7000 to 7077. Now I am downloading 7100.

When I tried to access the Samsung again, I got the error message that the HDD cannot be access and needs to be formated. That is my problem.

As much as possible I'd like to avoid the recovery route via Restorer 2000 etc with the need to "recover" the files to another HDD. Because this way I don't think I'll be certain that the files will be recovered "intact", you know, when you try to access them later the "file corrupted" message.

I was hoping some boot files were accidentaly erased on the HDD and that if I can only replace them back the HDD will work like before. My question is this: Is this an MBR issue? Can I fix it by reinstalling the MBR? For this can I use UBCD4WIN or the repair option of a Windows 2000 or Windows Vista installation CD?

Any comments are surely appreciated.
My System SpecsSystem Spec

 MBR Question

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Question about SSD's
I saw these comments on a site about SSD's , is the below comments true ? I was hoping to use the SSD as my primary drive , i don't store much . Thank you
Hardware & Devices
Thermal Paste Question..(Noobish Question)
Hey guys, I recently purchased Corsair H40 that came with pre applied thermal paste. Before I placed the H40 sink on my processor, I applied a thin layer on the on the processor with Cooler Master thermal paste. So essentially I mixed the H40 pre applied thermal paste with the Cooler Master thermal...
PC Custom Builds and Overclocking
WEI Question
Hey guys, I went into my system properties to get into something today, but when i did it prompted that i needed to re-rn the assesment. I did so and my graphics score went from a 7.4 down to a 6.9. Would this be caused from me running display fusion on my system to allow me to do certain...
Performance & Maintenance
RAM Question
I will probably be getting this motherboard Gigabyte GA-Z68A-D3H-B3 rev. 1.0 Socket 1155 ATX Motherboard Intel Z68 Express Intel Core i7 i5 i3 LGA1155 Processors, Dual DDR3 2133 SATA III SATA 6.0 Gb/s Gigabit LAN SLI CrossFireX USB3.0 HDMI DVI 7.1 Channels Audio-Best Computer Online Store Hous I...
Hardware & Devices
Answer Question, Ask Question.
First (hope you get the reference): In a world where a piano is a weapon, not a musical instrument, on what does Scott Joplin play "The Maple Leaf Rag"?
Chillout Room
Logitech 5.1 surround question and soundcard question IDT and Realtek
So my situation is unique lol i have a Dell inspiron n5010 laptop running Windows 7 ultimate 64 bit the soundcard for this is either IDT 92HD79B1, v., A01 or A03 i dont know what the default one mine came with is. Documentation i hope that helps ^ and the attatchment i...
Sound & Audio

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:13.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App