Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New system crashing

20 Apr 2010   #1
conoflex

Windows 7 Pro 64 bit
 
 
New system crashing

Just finished doing clean install of win 7 pro after putting all my shiny new kit in and it keeps crashing with mostly these 2 modules.
Anyone got any ideas why and what I can do about please.

On Tue 20/04/2010 09:36:24 your computer crashed
This was likely caused by the following module: ntfs.sys
Bugcheck code: 0x24 (0x1904FB, 0xFFFFF88003C22128, 0xFFFFF88003C21990, 0xFFFFF88001703DAF)
Error: NTFS_FILE_SYSTEM
Dump file: C:\Windows\Minidump\042010-31449-01.dmp
file path: C:\Windows\system32\drivers\ntfs.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT File System Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your
system which cannot be identified at this time.


On Tue 20/04/2010 08:19:23 your computer crashed
This was likely caused by the following module: ntoskrnl.exe
Bugcheck code: 0x1A (0x41790, 0xFFFFFA8003E212E0, 0xFFFF, 0x0)
Error: MEMORY_MANAGEMENT
Dump file: C:\Windows\Minidump\042010-29140-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your
system which cannot be identified at this time.


My System SpecsSystem Spec
.
20 Apr 2010   #2
Tews

64-bit Windows 8.1 Pro
 
 

A memory management error usually indicates corruption... download memtest86 and let it run for at least 5 complete passes and post the errors...
My System SpecsSystem Spec
20 Apr 2010   #3
Bill2

Windows 7 x64 pro/ Windows 7 x86 Pro/ XP SP3 x86
 
 

Also, zip your dump files and upload them. They'll help debug.
My System SpecsSystem Spec
.

22 Apr 2010   #4
conoflex

Windows 7 Pro 64 bit
 
 

I run memtest 2.11 (already had it gonna run 4.0 later) an that seemed to show errors.

here are the zipped dump files
My System SpecsSystem Spec
22 Apr 2010   #5
Tews

64-bit Windows 8.1 Pro
 
 

Your .dmp file is reporting the same error... Memory Management .. that along with the fact that memtest is reporting errors, suggest that your ram is bad... remove all but one stick and rerun memtest ... continue with each stick until you narrow it down and replace the faulty stick(s)...
My System SpecsSystem Spec
22 Apr 2010   #6
Dwarf

Windows 8.1 Pro RTM x64
 
 

Don't forget to test each stick separately, and to repeat the test for each stick in each socket.
My System SpecsSystem Spec
22 Apr 2010   #7
conoflex

Windows 7 Pro 64 bit
 
 

OK thaks guys will it later and report back asap, new ram too well I never

Andy
My System SpecsSystem Spec
22 Apr 2010   #8
thefabe

Windows 7 ultimate 64 bit / XP Home sp3
 
 

And just in case your wondering OCZ has a great RMA process and support. So they will take good care of you should it be a memory problem.OOps just noticed non US so I can't speak for support their, but if it's anything like here you will be pleased. Fabe
My System SpecsSystem Spec
22 Apr 2010   #9
conoflex

Windows 7 Pro 64 bit
 
 

Have used OCZ RMA over here quite good too.. Only had it a week !!!
Right then adjusted the volts to correct settings, still same so I ran memtest with all 8 gb in errors straight away, took one kit out run again errors straight away again, put other kit in run a few minutes and errors again, just running single strip now erors within a few minutes so does that look like that all 8 gig is faulty ?? bit odd isn't it.
So looks like I will have get on to Overclockers RMA dept in morning. Only had it last Friday
My System SpecsSystem Spec
24 Apr 2010   #10
conoflex

Windows 7 Pro 64 bit
 
 

Oh well 3 out 4 sticks picked up errors, so they are off to Overclockers UK under RMA
My System SpecsSystem Spec
Reply

 New system crashing




Thread Tools




Similar help and support threads
Thread Forum
System Crashing
Hi I am having problems with my system constantly crashing. PC Intel Q6600 quad 2 gig OZC Reaper 8500 (4) running with 2 slots filled currently GA-EP45-UDR3 Mother Board 650 Watt power supply (also swapped 750 watt power supply) ATI 5750 video - with most uptodate video driver from ATI...
BSOD Help and Support
System crashing
Further problems -------------------------------------------------------------------------------- ok, as a result of the previous reply I have wiped and reinstalled completely Windows 7 onto the system. I am running Trendmicro and it is not reporting any virus related issues. I wiped the C:...
BSOD Help and Support
System keeps on crashing after 10 min
Is Windows 7 x64, original installed from the retail version.. . . The hardware is one year old and I installed the OS fresh 2 days ago again from scratch.
BSOD Help and Support
System Crashing
- Windows 7 Professional - 64 bit - the original installed OS on the system? = Yes - an OEM or full retail version? = Full Retail - What is the age of system (hardware)? = 1 year - What is the age of OS installation (have you re-installed the OS?) = 1 year System is crashing randomly...
BSOD Help and Support
My system keeps crashing
Hi! I have almost same problem too,the difference being that I have this problem with windows 7 only,not in vista or Xp(not even in ubuntu).My system keeps crashing. I tried the method of verifier.Just now when i started my ADTV( i have a internal TV tuner card,the drivers are installed what i got...
BSOD Help and Support
My new system keeps crashing
A week ago I built myself a new computer. Everything seemed to go well, all the parts are new except the case, hard drive and dvd drive. The first install of windows I did, I didn't reformat correctly and it placed all my old files in a folder. This folder was huge, and seeing as I had just...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 23:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App