Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: How to load win7 on scsi raid systems?

30 May 2010   #1
ollie007

vista
 
 
How to load win7 on scsi raid systems?

How to load win7 on scsi raid systems? the drives aint recognise

i had to load sata drivers for my portege laptop m400

what drivers do i need? raid or scsi from dell?

poweredge 1800/2800


My System SpecsSystem Spec
.

30 May 2010   #2
Zepher

Windows 7 Ultimate 64bit
 
 

you need the drivers for the SCSI controller that is in your machine.
Could be Adaptec, LSI or some other manufacturer.

you may have to enable Interrupt 19 in the BIOS as well if it isn't already turned on.
My System SpecsSystem Spec
30 May 2010   #3
ollie007

vista
 
 

whats this interrupt 19?
My System SpecsSystem Spec
.


30 May 2010   #5
Zepher

Windows 7 Ultimate 64bit
 
 

Quote   Quote: Originally Posted by ollie007 View Post
whats this interrupt 19?
Let me google that for you
My System SpecsSystem Spec
30 May 2010   #6
ollie007

vista
 
 

how do i get dell to boot thru instead of doing the bios checks for boot options or whATEVER IT DOES?
My System SpecsSystem Spec
01 Jun 2010   #7
pcs3657

xp, vista, seven
 
 

  1. Start the computer from the installation media, and then follow the instructions in the Setup program.
  2. Select a target operating system.
  3. On the Where do you want to install Windows page of the Setup program, click Load drivers, and then locate the folder that contains the 32-bit drivers for your mass storage controller.
  4. Click the driver, and then click Next.
  5. Click Load drivers again, locate the drivers for your mass storage controller, and then click Next.
  6. Select the target partition, and then complete the installation.
My System SpecsSystem Spec
Reply

 How to load win7 on scsi raid systems?




Thread Tools





Similar help and support threads
Thread Forum
SCSI driver for Win7 pro 64 bits
Hi, my old Adaptec 2904 SCSI card is not recognized by Win7 64bits. Adaptec has drivers for Win7 32bits only, and says "there will be no support for 64 bits drivers for this card" (AIC-7850 based). Do you know "alternative" drivers (or other solution) that would allow to use the Adaptec...
Drivers
Win7 on SCSI HD disappeared
Yesterday, my Win7 installed on a SCSI drive failed to boot up. I got an error message of misssing MBR. I could see the SCSI drive in the BIOS as well as boot into Acronis Recovery. I boot up using another HD, but couldn't see the SCSI drive from Disk Management. 1. How could I reinstate the...
Hardware & Devices
Can't boot without DVD with SCSI Raid Card and IDE
Did a clean install with OEM Ultimate to a card based SCSI Raid 0. Formatted drive and windows recognizes without drivers. During partitioning windows automatically created two partitions a very small partition and second which is deemed bootable primary. Install went fine and can boot without...
Installation & Setup
Scsi/Raid Host Controller - HELP
Hi. First of all, Ive been searching the forums, and all of the suggested solutions doesnt work for me. I realized that the SCSI/RAID host controller were missing when i installed a program called tuneup utilities. Ive been having problems with itunes, when transferring songs to my iphone,...
Hardware & Devices
SCSI/RAID Host Controller
I get this error when trying to update to Windows 7. These devices might not work properly after the upgrade. Before upgrading, we recommend updating the drivers for these devices. Cancel the upgrade, open Control Panel and search for "update device drivers", or go to the device ...
Drivers
Win7 w XP Mode vs SCSI
Despite exhaustive exploration & testing, I have not been able to get Win7 RTM to properly run my SCSI hard drives. Though my XP OS & hardware passed MS's WIN7 compatible test and my actual 32bit Win7 RTM install, recognizes my Adaptec 2940U2W PCI SCSI Host AND successfully installs latest...
Drivers

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:38.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App