Atapi cd install :???????????

Page 7 of 10 FirstFirst ... 56789 ... LastLast

  1. WindowsStar
    Posts : 2,737
    Windows 7 Enterprise (x64); Windows Server 2008 R2 (x64)
       New #61

    RAID zero said:
    but doesnt my boot priority prevent that , i cant boot from my disc or the error in my previous post appears, and obviously like you said i cant from the USB , because their are no boot files.
    Yes but I have seen ASUS motherboards still try to boot the USB drive anyway.
      My Computer
    Quote Quote

  3. RAID zero
    Posts : 45
    Nothing ATM , not until i install it :(!!!!!!!!!!
    Thread Starter
       New #62

    i can boot from disc and install in IDE mode, would i be able to install those drivers in the IDE mode os install screen then swap back to RAID, and drivers would still be there, or are the drivers erased because of that?
      My Computer
    Quote Quote

  4. WindowsStar
    Posts : 2,737
    Windows 7 Enterprise (x64); Windows Server 2008 R2 (x64)
       New #63

    Are any of your Mac's Intel Macs? Or do you have another computer to try booting your Windows 7 DVD from? I would like to verify that the Windows 7 DVD does boot.
      My Computer
    Quote Quote

  6. RAID zero
    Posts : 45
    Nothing ATM , not until i install it :(!!!!!!!!!!
    Thread Starter
       New #64

    im currently typing to you on a Intel Core 2 Duo Mac in my kitchen owned by my sybling.
      My Computer
    Quote Quote

  7. RAID zero
    Posts : 45
    Nothing ATM , not until i install it :(!!!!!!!!!!
    Thread Starter
       New #65

    but like i said im able to boot and install in IDE mode, just cant seem to boot in RAID.
      My Computer
    Quote Quote

  8. WindowsStar
    Posts : 2,737
    Windows 7 Enterprise (x64); Windows Server 2008 R2 (x64)
       New #66

    RAID zero said:
    i can boot from disc and install in IDE mode, would i be able to install those drivers in the IDE mode os install screen then swap back to RAID, and drivers would still be there, or are the drivers erased because of that?
    Does your computer keep the RAID if you switch the BIOS to IDE? If it does then that will work. If when you switch to IDE if forces you to break the RAID then you will not have RAID in the install. You will not be able to change to RAID after the install. (Well you can but it would be way beyond what I could type in this forum)
      My Computer
    Quote Quote

  10. WindowsStar
    Posts : 2,737
    Windows 7 Enterprise (x64); Windows Server 2008 R2 (x64)
       New #67

    RAID zero said:
    but like i said im able to boot and install in IDE mode, just cant seem to boot in RAID.
    Maybe the BluRay Drive does not understand the RAID mode? However BluRay are so new that does not make sense. Do you have another plain DVD drive you can try?
      My Computer
    Quote Quote

  11. RAID zero
    Posts : 45
    Nothing ATM , not until i install it :(!!!!!!!!!!
    Thread Starter
       New #68

    okay so i should swap my bios setting to IDE, even though a intel matrixthing says i have a raid setup.. if this still allows me to install , i should do what? , will there be an option of the windows installer which says i can install the drivers before even putting windows 7 on?

    and if there is i put the drivers on swap BIOS back to RAid, and then attempt to boot and install in BIOS RAID , and Intel Matrix RAID MODE?
      My Computer
    Quote Quote

  12. RAID zero
    Posts : 45
    Nothing ATM , not until i install it :(!!!!!!!!!!
    Thread Starter
       New #69

    i actually mentioned earlier that i borrowed my freinds plain old DVD drive hooked it up and tried to instal in RAID , and it did not work , i figured this meant my blu ray was not an issue, it was something else.
      My Computer
    Quote Quote

  13. WindowsStar
    Posts : 2,737
    Windows 7 Enterprise (x64); Windows Server 2008 R2 (x64)
       New #70

    I think at this point your best bet is to use someone elses computer and make abootable Windows 7 USB drive. Then you can boot the USB Windows 7 and do the install. I will get the instructions and post them here.
      My Computer
    Quote Quote

 
Page 7 of 10 FirstFirst ... 56789 ... LastLast

  Related Discussions
I posted this in another thread too, but I think this might be related to some drivers maybe an expert on device/drivers can answers me here too. I got an issue, wich I already solved partially, but I need input to localize the real source of the problem. I need an input from...
Disk at Id 0 on bus 0 on atapi
in Installation & Setup

Hello I wanted to change partitions and make new partitions and then instal OS , but I saw a unpartitioned space (8189MB) and I couldn't delete it my HDD is maxtor 500 SATA I saw two sentences in setup 476938 MB Disk at Id 0 on bus 0 on iastor unpartitioned space 476938 Mb 8190 MB...
I'm trying to reinstall windows from a dvd, but get an error message saying I need to install a driver for the CD/DVD drive. I have tried to find it online, but only come accross older versions not for Windows 7. Accd. to various sources its the ITE IT8211 ATA\ATAPI controller. I want to put it on...
IDE ATA/ATAPI Controllers
in Hardware & Devices

Two questions. First, what are they? Second, is it normal to have 3 ATA Channel 0 and 3 ATA Channel 1? I only have one hard drive. http://img375.imageshack.us/img375/7161/capturetq.png
IDE ATA/Atapi Controllers
in Hardware & Devices

Something that has bugged me long enough that I will now as the question...is it normal to have 3 instances of 3 different controllers in the Device Manager? This doesn't include the controllers listed under Storage Controllers.
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 19:39.
Find Us