 | |
| |
| 10 May 2009 | #1 |
| | Problem with memory I installed several versions of Win 7 and each time the same problem: during installation or during use of system restart when you use all 3gb ddr memory(3x1gb ddr2 800mhz kingoston). when removed any module then all the extra work well and without problems, I've combined memory moduls but it is not a problem in the,I tested memory and is properly,3gb ram perfectly and without problems works with WinXP or WinVista,but with Win 7 no chance to work normal and good. Is there any idea-proposal,of how to resolve this problem...    |
My System Specs | |
| 10 May 2009 | #2 |
| | It might be a problem with the board seeing the 3 sticks as it's trying to run 2 of them in dual mode. Look in your bios and see if there is a way to disable dual channel on the memory. If this doesn't work then you might well have to either drop down to 2 sticks permanently or buy yourself another stick so both channels can run in dual mode. |
| My System Specs |
| 10 May 2009 | #3 |
| | thanks, will try and bring what was |
| My System Specs |
| . |
| |
 |
Problem with memory problems?
| Thread Tools | |
| Similar help and support threads for: Problem with memory | ||||
| Thread | Forum | |||
| Memory problem, I think | Hardware & Devices | |||
| memory problem | Hardware & Devices | |||
| Memory problem | Hardware & Devices | |||
| Memory Problem | Hardware & Devices | |||
| Memory Problem | General Discussion | |||
All times are GMT -5. The time now is 04:31 AM.
