Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on windows 7 install

04 Jul 2010   #1
twistedsixty4

Windows 7 Ultimate 64bit
 
 
BSOD on windows 7 install

hi,
i built my friends computer for him, (not my first) and went to install win 7 ultimate 64bit. the system booted just fine started the "windows is loading files" screen, once all the files loaded it went to the "starting windows" screen where the orbs of light come together to form the windows emblem, but a couple seconds after it goes from loading files to starting it BSODs.

the system specs are:
-Windows 7 ultimate 64 Bit - purchased
-OEM caviar green WD 500GB HDD
-OEM Samsung Bluray drive
-AMD Phenon II x4 925 (processor)
-Asus M4A87TD EVO (motherboard)
-EVGA Nvidia 9600 GSO (video card)
-Rosewill 650 watt PSU

i have updated the bios to the most recent build, and the bsod changed what it was complaining about... from

1. netio.sys [DRIVER_IRQL_NOT_LESS_OR_EQUAL]
to
2. netio.sys [PAGE_FAULT_IN_NONPAGED_AREA]

this happens with win 7 64bit,

i tried to install 32bit vista ultimate and it bsoded again, same place, only the bsod pointed to something else...

pci.sys

PAGE_FAULT_IN_NONPAGED_AREA


*** STOP: 0x00000050 (oxffffff85, 0x00000001, 0x8071e3fc, 0x00000000)

*** pci.sys - address 8071e3fc base at 80715000, datestamp 4549adc1

after that i tried to install windows xp home ed. sp1, that actually worked, and i was able to run it, and got it updated to sp3 and ran the windows 7 update advisor (that file is attached, 64bit and 32bit said the same thing).

after it was fully updated, i put the vista 32bit disk back in to try the upgrade system option, it work just fine till it had to restart, at which point it would load a black screen and do nothing..

i thought that it might have been caused by the upgrading, maybe the MBR needed to be reset, so i put in my win 7 boot loader repair disk, but right after that loaded the files, it BSODed.

last ditch effort i tried a copy of windows 7 ultimate 32bit, once it finished loading files it froze in the "starting windows" screen. so i tried it again but told it to boot setup in safemode, that seemed to work, it started spewing all the drivers that it was loading, then once it reached "disk.sys" it BSODed, pointing at "msrpc.sys" with a datestamp of "00000000"

right now the computer is running killdisk to reformat the HDD.. i am running out of ideas, please help me..




Attached Files
File Type: zip WILSON 64 bit.zip (10.2 KB, 11 views)
My System SpecsSystem Spec
.

04 Jul 2010   #2
kegobeer

Windows 7 Ultimate x64 SP1
 
 

How is your drive configured in the BIOS - as SATA or IDE? Have you updated the BIOS? Have you set default values in the BIOS? How much RAM do you have installed? Have you tried installing with all but the basic hardware installed? Have you tried disabling your onboard NIC?
My System SpecsSystem Spec
04 Jul 2010   #3
twistedsixty4

Windows 7 Ultimate 64bit
 
 

the HDD is a sata drive, the bios is fully updated, i have set the values in the bios, but there i am a little fuzzy on how everything should be set. there are 2 sticks of 2gb kingston memory, and the bios recognizes it just fine. i have tried removing all unnecessary components, but it doesn't change anything, i do not believe i have changed the onboard NIC settings, it might still be on..
My System SpecsSystem Spec
.


04 Jul 2010   #4
Tews

64-bit Windows 8.1 Pro
 
 

We will need the actual .dmp file for anaylsis... [1 - Novice] How to ask for help with a BSOD problem
My System SpecsSystem Spec
04 Jul 2010   #5
twistedsixty4

Windows 7 Ultimate 64bit
 
 

well thats kinda the point, there is no windows installation, ergo, no dump files...
My System SpecsSystem Spec
04 Jul 2010   #6
Tews

64-bit Windows 8.1 Pro
 
 

You may want to read this for possible solutions ... Common Installation Problems and Their Solutions
My System SpecsSystem Spec
04 Jul 2010   #7
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

My System SpecsSystem Spec
08 Jul 2010   #8
twistedsixty4

Windows 7 Ultimate 64bit
 
 

alright, here is whats happened over the last few days...

i checked:
1. the memory using memtest86+ and windows memory diag. off of hiren's boot CD
2. the HDD using the western digital HDD diag off of Hiren's

after that turned up nothing i decided to try to install the os to the HDD from another computer. i figured that if it didn't then it was a hard drive issue, if it did, then it was something else... it did. right now the hard drive has win 7 64bit installed and fully updated.

i have tried to have the computer boot from the HDD, but no luck, i dont get a blue screen, but it will reset the computer at the same spot. also it reaches a different driver if i tell it to boot in safemode, it stops just after a driver named [something]pnp.sys (i cant remember the full name, i will post it when i get back infront of that computer).

im leaning toward it being a motherboard driver issue... this leads me to my question, is there a way to add drivers to a windows filesystem (in particular the boot) without installing them from a cd, ie. copying the files from the cd to the required folders.

the other thing i wanted to add was that i checked where minidump is supposed to be (c:\windows\minidump) and its not there, and searching for ".dmp" turns up nothing. am i doing something wrong? do i have to change some settings before its enabled?

thanks
My System SpecsSystem Spec
09 Jul 2010   #9
EpicThorn

Windows 7 Ultimate 64 Bit
 
 

You can use nLite to slipstream 3rd party drivers to an install .ISO
My System SpecsSystem Spec
10 Jul 2010   #10
kegobeer

Windows 7 Ultimate x64 SP1
 
 

Have you disabled your onboard NIC?
My System SpecsSystem Spec
Reply

 BSOD on windows 7 install




Thread Tools





Similar help and support threads
Thread Forum
Windows 7 - Fresh Install BSOD whilst applying windows updates
I built up a new PC before Christmas. These were the components: Asus P8Z77-V Motherboard Intel i5 3570K 3.4GHz 2 x G-Skill 8GB DDR3 1600Mhz PowerColor HD 6870 1GB GDDR5 Dual DVI HDMI PCI-E Graphics Card OCZ 120GB Agility 3 SSD Not really used it that much and have had random crashes...
BSOD Help and Support
windows 7 wont complete install. restarts install or bsod
Hello everyone. first off, thanks for taking the time to consider my problem. i know this is quite a redundant issue, thank you for your patience. First off this is a newly built computer, all fresh components. after cleaning/activating the hdd via shift +f10 at win7 setup,(which took me...
Installation & Setup
lots of BSOD - Format, Clean windows install - Still same BSOD
Hi, I use a 1.5 year old aces aspire 5738z and I think it just died on me. Here is what happens. Whatever I do it cannot stay without a BSOD for more than 10 minutes. I tried reinstalling drivers and it did not change anything so I tried several things but finally just formated it and installed...
BSOD Help and Support
BSOD when trying to run windows update / install driver / install s/w
Hi I have just built a Windows 7 machine and am having lots of problems I can't run windows update which outputs error messages - have followed all the fixes for this to no success I get BSOD constantly whenever I try to do anything The system is all new apart from the GPX card...
BSOD Help and Support
BSOD on clean install of windows 7 and windows update
Hi there, Just bought an upgrade to RAM, graphics, processor and motherboard this week and have been having problems with it since. I keep getting BSOD whether is be memory_management, NTFS.sys , or usbhub.sys. on clean installs on a range of new and old hard drives. I have run memtest...
BSOD Help and Support
New windows Install, Bsod
Hi: I just recently acquired a win7 pro 64 thru work. Loaded it on my machine and have gotten 2 bsod in 2 days. Most of my system is 2-3 years old. However, Ive had the PSU, and GPU recently RMA'd. Uploaded, attached a zip file as per the instructions. Any help would be...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:57.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App