Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: My Device(s) Can't "See" my Media Center PC


21 Jul 2011   #1

Windows 7 64-bit
 
 
My Device(s) Can't "See" my Media Center PC

When I built my PC two weeks ago I named it ADAMA-PC. After putting my files back on it, I activated Windows Media Center and shared my music and my videos.

ADAMA-PC is my host computer, and my client devices are as follows:
Samsung TV, PS3, Xbox360

Everything was going well. I can access my music and my videos on all three devices until yesterday.

The only thing I remembered changing was the name and workgroup of my host computer. From ADAMA-PC, I changed it to just ADAMA. And from WORKGROUP, I called it GALACTICA.

I am not sure that is the culprit, but that is what I remember changing. Any ideas how I can get my host PC running again? Thank you.

NOTES:
The host PC, TV, PS3 and 360 are all part of the same subnet.

WHAT I'VE TRIED SO FAR:
1) I tried to un-check and check various folders on my Media Libraries to see if that changes anything - NO CHANGE
2) I removed/uninstalled Windows Media Center from Programs and Features > Windows Features On/Off, restarted, installed it back, restarted. When I tried to re-configure WMC, my assigned folders are still in the Libraries. - NO CHANGE

I am thinking of wiping out the settings of the WMC as my next course of action, since going through Step 2 above did not erase my settings. Unfortunately, I don't know where to go to do this. I tried opening WMC from work and there was a setup process it went through before I got to the main WMC Home. How can I get my host PC to do that if its WMC has been previously configured?

Besides a clean re-install of the OS, can you guys point me to the right direction?

Thank you.

--
Windows 7 Pro 64-bit

My System SpecsSystem Spec
.

04 Aug 2011   #2

Windows 7 Ultimate 64Bit (SP 1)
 
 

Hi

You need to have exactly the same Workgroup name in all PC's that you wish to connect and define the network type as a 'Work' network. This will then use the workgroup name for security purposes.

Regards
UKMedia
My System SpecsSystem Spec
Reply

 My Device(s) Can't "See" my Media Center PC




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:59 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33